kconfig: Remove deprecated option BOOTLOADER_SRAM_SIZE

Kconfig.zephyr

@@ -1022,32 +1022,6 @@ config IS_BOOTLOADER
 	  This option indicates that Zephyr will act as a bootloader to execute
 	  a separate Zephyr image payload.
 
-config BOOTLOADER_SRAM_SIZE
-	int "SRAM reserved for bootloader [DEPRECATED]"
-	default 0
-	depends on !XIP || IS_BOOTLOADER
-	depends on ARM || XTENSA
-	help
-	  This option specifies the amount of SRAM (measure in kB) reserved for
-	  a bootloader image, when either:
-	  - the Zephyr image itself is to act as the bootloader, or
-	  - Zephyr is a !XIP image, which implicitly assumes existence of a
-	  bootloader that loads the Zephyr !XIP image onto SRAM.
-
-	  This option is deprecated, users should transition to using DTS to set this, if needed.
-	  To be removed after Zephyr 3.7 release.
-
-config BOOTLOADER_SRAM_SIZE_DEPRECATED
-	bool
-	default y
-	select DEPRECATED
-	depends on BOOTLOADER_SRAM_SIZE != 0
-	depends on !XIP || IS_BOOTLOADER
-	depends on ARM || XTENSA
-	help
-	  Non-prompt symbol to indicate that the deprecated BOOTLOADER_SRAM_SIZE Kconfig has a
-	  non-0 value. Please transition to using devicetree.
-
 config BOOTLOADER_BOSSA
 	bool "BOSSA bootloader support"
 	select USE_DT_CODE_PARTITION

include/zephyr/arch/arm/cortex_a_r/scripts/linker.ld

@@ -52,19 +52,8 @@
   #define ROM_SIZE (CONFIG_FLASH_SIZE*1K - CONFIG_FLASH_LOAD_OFFSET - ROM_END_OFFSET)
 #endif
 
-#if defined(CONFIG_XIP)
-  #if defined(CONFIG_IS_BOOTLOADER)
-    #define RAM_SIZE (CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-    #define RAM_ADDR (CONFIG_SRAM_BASE_ADDRESS + \
-                     (CONFIG_SRAM_SIZE * 1K - RAM_SIZE))
-  #else
-    #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K)
-    #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-  #endif
-#else
-  #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K - CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-  #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-#endif
+#define RAM_SIZE (CONFIG_SRAM_SIZE * 1K)
+#define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
 
 /* Set alignment to CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE
  * to make linker section alignment comply with MPU granularity.

include/zephyr/arch/arm/cortex_m/scripts/linker.ld

@@ -52,19 +52,8 @@
 #define ROM_SIZE (CONFIG_FLASH_SIZE * 1024 - CONFIG_FLASH_LOAD_OFFSET - ROM_END_OFFSET)
 #endif
 
-#if defined(CONFIG_XIP)
-#if defined(CONFIG_IS_BOOTLOADER)
-#define RAM_SIZE (CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-#define RAM_ADDR (CONFIG_SRAM_BASE_ADDRESS + \
-	(CONFIG_SRAM_SIZE * 1K - RAM_SIZE))
-#else
 #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K)
 #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-#endif
-#else
-#define RAM_SIZE (CONFIG_SRAM_SIZE * 1K - CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-#define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-#endif
 
 #if defined(CONFIG_CUSTOM_SECTION_ALIGN)
 _region_min_align = CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE;

soc/infineon/cat1b/cyw20829/linker.ld

@@ -45,19 +45,8 @@
 #define ROM_SIZE (CONFIG_FLASH_SIZE * 1024 - CONFIG_FLASH_LOAD_OFFSET - ROM_END_OFFSET)
 #endif
 
-#if defined(CONFIG_XIP)
-#if defined(CONFIG_IS_BOOTLOADER)
-#define RAM_SIZE (CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-#define RAM_ADDR (CONFIG_SRAM_BASE_ADDRESS + \
-	(CONFIG_SRAM_SIZE * 1K - RAM_SIZE))
-#else
 #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K)
 #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-#endif
-#else
-#define RAM_SIZE (CONFIG_SRAM_SIZE * 1K - CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
-#define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
-#endif
 
 #if defined(CONFIG_CUSTOM_SECTION_ALIGN)
 _region_min_align = CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE;