diff --git a/tests/test_tuya_shutter.py b/tests/test_tuya_shutter.py
new file mode 100644
index 0000000000..3c411c970d
--- /dev/null
+++ b/tests/test_tuya_shutter.py
@@ -0,0 +1,34 @@
+"""Tests for Tuya Shutter quirks."""
+
+from zigpy.zcl.clusters.general import PowerConfiguration
+
+import zhaquirks
+from zhaquirks.tuya import TuyaLocalCluster
+from zhaquirks.tuya.mcu import TuyaMCUCluster
+
+zhaquirks.setup()
+
+
+def test_valid_attributes(zigpy_device_from_v2_quirk):
+    """Test that valid attributes on virtual clusters are populated by Tuya datapoints mappings."""
+    quirked = zigpy_device_from_v2_quirk("_TZE284_myikb7qz", "TS0601")
+    ep = quirked.endpoints[1]
+
+    power_attr_id = PowerConfiguration.AttributeDefs.battery_percentage_remaining.id
+
+    power_config_cluster = ep.power
+
+    assert isinstance(power_config_cluster, TuyaLocalCluster)
+
+    # check that the virtual clusters have expected valid attributes
+    assert {power_attr_id} == power_config_cluster._VALID_ATTRIBUTES
+
+
+async def test_tuya(zigpy_device_from_v2_quirk):
+    """Example Tuya Test."""
+
+    quirked = zigpy_device_from_v2_quirk("_TZE284_myikb7qz", "TS0601")
+    ep = quirked.endpoints[1]
+
+    assert ep.tuya_manufacturer is not None
+    assert isinstance(ep.tuya_manufacturer, TuyaMCUCluster)
diff --git a/zhaquirks/tuya/tuya_shutter.py b/zhaquirks/tuya/tuya_shutter.py
new file mode 100644
index 0000000000..61c74cfbc2
--- /dev/null
+++ b/zhaquirks/tuya/tuya_shutter.py
@@ -0,0 +1,132 @@
+"""Tuya Plantation Shutter."""
+
+from zigpy.quirks.v2 import EntityPlatform, EntityType
+from zigpy.quirks.v2.homeassistant import PERCENTAGE
+import zigpy.types as t
+
+from zhaquirks.tuya.builder import TuyaQuirkBuilder
+
+
+class OpeningStateEnum(t.enum8):
+    """Enum for opening state."""
+
+    Open = 0x00
+    Stop = 0x01
+    Close = 0x02
+    Continue = 0x03
+
+
+class SituationSetEnum(t.enum8):
+    """Enum for Situation Set."""
+
+    fully_open = 0x00
+    fully_close = 0x01
+
+
+class MotorDirectionEnum(t.enum8):
+    """Enum for Motor Direction."""
+
+    Forward = 0x00
+    Backward = 0x01
+
+
+class BorderLimitEnum(t.enum8):
+    """Enum for Border Limit Setting."""
+
+    up = 0x00
+    down = 0x01
+    up_delete = 0x02
+    down_delete = 0x03
+    remove_top_bottom = 0x04
+
+
+(
+    TuyaQuirkBuilder("_TZE284_myikb7qz", "TS0601")
+    .tuya_enum(
+        dp_id=1,
+        attribute_name="control_state",
+        enum_class=OpeningStateEnum,
+        entity_type=EntityType.STANDARD,
+        entity_platform=EntityPlatform.SENSOR,
+        translation_key="control",
+        fallback_name="Control",
+    )
+    # Working
+    .tuya_number(
+        dp_id=2,
+        attribute_name="shutter_target_setting",
+        type=t.uint32_t,
+        min_value=0,
+        max_value=100,
+        step=1,
+        unit=PERCENTAGE,
+        translation_key="shutter_target_setting",
+        fallback_name="Shutter Target Setting",
+    )
+    # Working
+    .tuya_number(
+        dp_id=3,
+        attribute_name="shutter_postion",
+        type=t.uint32_t,
+        min_value=0,
+        max_value=100,
+        step=1,
+        unit=PERCENTAGE,
+        translation_key="shutter_position",
+        fallback_name="Shutter Position",
+    )
+    # Working Needs to be manually triggered to pick up sensor
+    .tuya_enum(
+        dp_id=5,
+        attribute_name="motor_direction",
+        enum_class=MotorDirectionEnum,
+        entity_type=EntityType.STANDARD,
+        entity_platform=EntityPlatform.SENSOR,
+        translation_key="motor_direction",
+        fallback_name="Motor Direction",
+    )
+    # Not Working
+    .tuya_enum(
+        dp_id=11,
+        attribute_name="situation_set",
+        enum_class=SituationSetEnum,
+        entity_type=EntityType.STANDARD,
+        entity_platform=EntityPlatform.SENSOR,
+        translation_key="situation_set",
+        fallback_name="Situation Set",
+    )
+    # power_cfg=PowerConfiguration does not work
+    .tuya_battery(
+        dp_id=13,
+    )
+    # Not working
+    .tuya_enum(
+        dp_id=16,
+        attribute_name="border_limit",
+        enum_class=BorderLimitEnum,
+        entity_type=EntityType.STANDARD,
+        entity_platform=EntityPlatform.SENSOR,
+        translation_key="border_limit",
+        fallback_name="Border Limit Setting",
+    )
+    # Not working
+    .tuya_number(
+        dp_id=19,
+        attribute_name="position_best",
+        type=t.uint32_t,
+        min_value=0,
+        max_value=100,
+        step=1,
+        unit=PERCENTAGE,
+        translation_key="position_best",
+        fallback_name="Best Position",
+    )
+    .tuya_switch(
+        dp_id=101,
+        attribute_name="child_lock",
+        translation_key="child_lock",
+        fallback_name="Child lock",
+    )
+    .skip_configuration()
+    .add_to_registry()
+)