Fibaro FGRGBW Controller targetColor

[hestiap]

Hi,
I’d like to change the color of this RGBW controller via mqtt.
Via the zwavejsmqtt GIU, I could do

Which gave in mqtt
{"time":1637699047658,"value":{"warmWhite":0,"red":111,"green":0,"blue":0},"nodeName":"LED Terrasse","nodeLocation":"Jardin"}
I’d tried to do the same via dz with no success
mosquitto_pub -t zwave/95/51/0/targetColor -m {\"value\":\"warmWhite\":75,\"red\":0,\"green\":13,\"blue\":100}
and in mqtt
{"value":"warmWhite":75,"red":0,"green":13,"blue":100}
But nothing on zwavejsmqtt log ☹
Any help will be welcome

[robertsLando]

Check docs, to set values you have to add /set suffix:

mosquitto_pub -t zwave/95/51/0/targetColor/set -m {\"value\":\"warmWhite\":75,\"red\":0,\"green\":13,\"blue\":100}

[hestiap]

Thanks,
I wasn't sure it was a "set"

I had tried it also with no success, but perhaps with other mistakes
I've done it again with your line!
out of dz:
mosquitto_pub -t zwave/95/51/0/targetColor/set -m {\"value\":\"warmWhite\":75,\"red\":0,\"green\":13,\"blue\":100}

in mqtt:
{"value":"warmWhite":75,"red":0,"green":13,"blue":100}

in zwavejs2mqtt:
2021-11-24 08:34:46.760 INFO MQTT: Message received on zwave/95/51/0/targetColor/set: '{"value":"warmWhite":75,"red":0,"green":13,"blue":100}' 2021-11-24 08:34:46.763 INFO ZWAVE: Writing '{"value":"warmWhite":75,"red":0,"green":13,"blue":100}' to 95-51-0-targetColor 2021-11-24 08:34:46.766 ERROR ZWAVE: Unable to write '{"value":"warmWhite":75,"red":0,"green":13,"blue":100}' on 95-51-0-targetColor

Driver: Color Switch: "targetColor" must be set to an object which specifies each color channel (ZW0322)

So it didn't work neither as is

[robertsLando]

You are missing a {.

mosquitto_pub -t zwave/95/51/0/targetColor/set -m {\"value\":{\"warmWhite\":75,\"red\":0,\"green\":13,\"blue\":100}}

[hestiap]

Thanks again,
it works