RazBerry 2 green LED almost always on

[AlfaBravoX]

Hi,

I'd appreciate help. I have search a lot but did not find an answer. I have following setup:

Razberry GPIO hat with RPI3
Raspbian Bullseye 11.7
docker
Danfoss LC-13 TRV v 1.1 (not zwave+)

All seems to work well, however the green LED on hat is almost always on, with some exceptions when it powers OFF for a moment time to time otherwise stays ON. Anyone experienced same behaviour.

Also it appears that ZUI shows different FW version then original ZMESerialUpdater shows:

SERIAL INFO 
		 VERSION:  05 25  VENDOR:  01 47

whereas ZUI shows:

any ideas?

[kpine]

All seems to work well, however the green LED on hat is almost always on, with some exceptions when it powers OFF for a moment time to time otherwise stays ON. Anyone experienced same behaviour.

Have you tried contacting Z-Wave.me support about this? Maybe it's explained in their manual? These sorts of things are vendor specific, like the Aeotec LED.

Also it appears that ZUI shows different FW version then original ZMESerialUpdater shows:

SERIAL INFO 
		 VERSION:  05 25  VENDOR:  01 47

01 47 vendor ID is in hex format (0x0147). So I would suspect 05 25 is 0x5 0x25, or 5 37 in decimal, same as Z-Wave JS.

[AlfaBravoX]

Ok, thanks for pointing to hex format, this seems to be the case. Regarding TX green LED I will turn to Z-Wave.me support..