Automatic translation import

Author: akiharumiho

docs/hu_HU/get-started.md

@@ -1,8 +1,8 @@
 ---
 noneSelected: A rendszer modell szükséges.
 invalidVersion: Ez nem tűnik egy érvényes rendszer verziónak.
-cfwPrefixDetected: Your console may already have custom firmware installed. Please retry Section I. If you still only reach the HOME menu, click the link below and ask, in English, for assistance.
-inviteLinkText: Nintendo Homebrew on Discord
+cfwPrefixDetected: A konzolod már lehet rendelkezik egyedi firmware telepítéssel. Próbáld meg újra az I. részt. Ha továbbra is a HOME menübe jutsz, kattints a linkre alább és kérj angolul segítséget.
+inviteLinkText: Nintendo Homebrew a Discord-on
 otherPrefix: (Egyéb)
 head:
   [

docs/pl_PL/_include/addproxy.md

@@ -17,5 +17,5 @@ A visual guide is available for this section [here](/images/screenshots/set-prox
 5. Set the Proxy Server to `ssloth.nintendohomebrew.com`, and the Port to `8080`
 6. Click OK, then click Save
 7. When prompted, click "Test" to perform the connection test
-    - The test should succeed
+   - The test should succeed
 8. Click "OK" to continue

docs/pl_PL/_include/configure-luma3ds.md

@@ -1,5 +1,5 @@
 1. Your console should have booted into the Luma3DS configuration menu
-    - Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-    - For the purpose of this guide, **leave these options on the default settings** (do not check or uncheck anything)
-    - If your console displays a white notification LED and shuts down when you try to power it on, ensure that you have [Luma3DS's `boot.firm`](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of SD card (inside `Luma3DSvX.X.X.zip`)
+   - Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+   - For the purpose of this guide, **leave these options on the default settings** (do not check or uncheck anything)
+   - If your console displays a white notification LED and shuts down when you try to power it on, ensure that you have [Luma3DS's `boot.firm`](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of SD card (inside `Luma3DSvX.X.X.zip`)
 2. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie

docs/pl_PL/_include/ctrtransfer-images.md

@@ -1,12 +1,12 @@
 1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
 2. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it is completed
 3. Jeśli zostaniesz poproszony o ustawienie czasu RTC, naciśnij (A) aby to zrobić, następnie ustaw datę i czas, oraz naciśnij (A) aby kontynuować
-    - Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+   - Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
 4. Wciśnij (Home) aby przywołać menu akcji
 5. Wybierz "Scripts..."
 6. Select "ctrtransfer"
 7. Select your downloaded CTRTransfer image
-    - The script will calculate the hash of your image to make sure it's valid
+   - The script will calculate the hash of your image to make sure it's valid
 8. Once the checks are completed, press (A) to continue
 9. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
 10. Once the transfer is completed, press (A) to continue
@@ -15,7 +15,7 @@
 13. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
     - Updates while using B9S + Luma (what you have) are safe
     - If this gives you an error, set your DNS settings to "auto"
-        - Pretendo users: Switch to Nintendo Network in Nimbus
+      - Pretendo users: Switch to Nintendo Network in Nimbus
 
 ::: info
 

docs/pl_PL/_include/ctrtransfer-main.md

@@ -10,12 +10,12 @@ If the script found no user tickets, continue to the next section.
 4. Wybierz "out"
 5. Wybierz "ctrtransfer_tickets"
 6. Wykonaj następujący proces dla folderu `eshop` lub `unknown`, albo obu
-    - Navigate to the folder
-    - Select "\<current directory>"
-    - Select "Install and delete all tickets"
-    - Wait. Przez chwilę system może wydawać się zawieszony.
-    - Naciśnij (A) by potwierdzić
-    - Press (B) to decline installing tickets from CDN.
+   - Navigate to the folder
+   - Select "\<current directory>"
+   - Select "Install and delete all tickets"
+   - Wait. Przez chwilę system może wydawać się zawieszony.
+   - Naciśnij (A) by potwierdzić
+   - Press (B) to decline installing tickets from CDN.
 7. Wciśnij (Home), aby wyjść z FBI
 8. Re-open the Homebrew Launcher, either through the Homebrew Launcher icon on the HOME Menu or by re-following Section IV of this page
 9. Launch faketik from the list of homebrew

docs/pl_PL/_include/ctrtransfer-ticket-copy.md

@@ -4,5 +4,5 @@
 4. Wybierz "No EmuNAND"
 5. Wybierz opcję "Auto"
 6. Naciśnij (A) aby zaakceptować etykietę `GM9SD`
-    - Optionally, you may input a custom name for the SD card
+   - Optionally, you may input a custom name for the SD card
 7. Kiedy zostaniesz poproszony, wprowadź podaną kombinację klawiszy

docs/pl_PL/_include/format-sd-gm9.md

@@ -1,8 +1,8 @@
 1. Copy the following command:
-      ```
-      wget -O - https://imset9.686178.xyz | sh
-      ```
-    - Tap on the box above and a Copy icon should appear
+    ```
+    wget -O - https://imset9.686178.xyz | sh
+    ```
+   - Tap on the box above and a Copy icon should appear
 2. Open the iSH application
 3. Paste the above command by tapping [the paste button](/images/screenshots/mset9/ish-paste-button.png) at the top right corner of your keyboard, then tap Return to run the command
 4. Select your SD card in the Files popup, then tap "Open" at the top right corner of the popup

docs/pl_PL/_include/ish-chorus.md

@@ -1,4 +1,4 @@
 1. Run the MSET9 script:
-    - **Windows**: Double-click `MSET9-Windows.bat`
-    - **macOS**: Double-click `MSET9-macOS.command` and enter your password if prompted
-    - **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
+   - **Windows**: Double-click `MSET9-Windows.bat`
+   - **macOS**: Double-click `MSET9-macOS.command` and enter your password if prompted
+   - **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter

docs/pl_PL/_include/mset9-chorus.md

@@ -4,8 +4,8 @@
 4. Wybierz "Backup Options"
 5. Wybierz "SysNAND Backup"
 6. Naciśnij (A) by potwierdzić
-    - This process will take some time
-    - If you get an error, look for your issue in the [troubleshooting guide](troubleshooting-finalizing-setup.html)
+   - This process will take some time
+   - If you get an error, look for your issue in the [troubleshooting guide](troubleshooting-finalizing-setup.html)
 7. Naciśnij (A), aby kontynuować
 8. Wciśnij (B) aby wrócić do menu głównego
 9. Wybierz "Exit"