Skip to content

Commit 43a3043

Browse files
jeromecoutantjeromecoutant
committed
STM32L1 warning compilation
[-Wparentheses-equality]
1 parent daf8d11 commit 43a3043

File tree

6 files changed

+21
-21
lines changed

6 files changed

+21
-21
lines changed

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_adc.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -1736,7 +1736,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf
17361736
{
17371737
SET_BIT(ADC->CCR, ADC_CCR_TSVREFE);
17381738

1739-
if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
1739+
if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
17401740
{
17411741
/* Delay for temperature sensor stabilization time */
17421742
/* Compute number of CPU cycles to wait for */

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_adc_ex.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -845,7 +845,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I
845845
{
846846
SET_BIT(ADC->CCR, ADC_CCR_TSVREFE);
847847

848-
if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR))
848+
if (sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)
849849
{
850850
/* Delay for temperature sensor stabilization time */
851851
/* Compute number of CPU cycles to wait for */

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_rtc_ex.c

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -1087,7 +1087,7 @@ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef
10871087
hrtc->State = HAL_RTC_STATE_BUSY;
10881088

10891089
#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
1090-
if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE))
1090+
if(sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)
10911091
{
10921092
/* Configure the RTC_TAFCR register */
10931093
sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE;
@@ -1150,7 +1150,7 @@ HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperType
11501150

11511151
#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
11521152
/* Configure the tamper trigger */
1153-
if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE))
1153+
if(sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)
11541154
{
11551155
sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE;
11561156
}

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_tim.c

Lines changed: 14 additions & 14 deletions
Original file line numberDiff line numberDiff line change
@@ -393,11 +393,11 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat
393393
/* Check the parameters */
394394
assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
395395

396-
if((htim->State == HAL_TIM_STATE_BUSY))
396+
if(htim->State == HAL_TIM_STATE_BUSY)
397397
{
398398
return HAL_BUSY;
399399
}
400-
else if((htim->State == HAL_TIM_STATE_READY))
400+
else if(htim->State == HAL_TIM_STATE_READY)
401401
{
402402
if((pData == 0 ) && (Length > 0))
403403
{
@@ -767,11 +767,11 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel
767767
/* Check the parameters */
768768
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
769769

770-
if((htim->State == HAL_TIM_STATE_BUSY))
770+
if(htim->State == HAL_TIM_STATE_BUSY)
771771
{
772772
return HAL_BUSY;
773773
}
774-
else if((htim->State == HAL_TIM_STATE_READY))
774+
else if(htim->State == HAL_TIM_STATE_READY)
775775
{
776776
if(((uint32_t)pData == 0 ) && (Length > 0))
777777
{
@@ -1246,11 +1246,11 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe
12461246
/* Check the parameters */
12471247
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
12481248

1249-
if((htim->State == HAL_TIM_STATE_BUSY))
1249+
if(htim->State == HAL_TIM_STATE_BUSY)
12501250
{
12511251
return HAL_BUSY;
12521252
}
1253-
else if((htim->State == HAL_TIM_STATE_READY))
1253+
else if(htim->State == HAL_TIM_STATE_READY)
12541254
{
12551255
if(((uint32_t)pData == 0 ) && (Length > 0))
12561256
{
@@ -1721,11 +1721,11 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel
17211721
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
17221722
assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
17231723

1724-
if((htim->State == HAL_TIM_STATE_BUSY))
1724+
if(htim->State == HAL_TIM_STATE_BUSY)
17251725
{
17261726
return HAL_BUSY;
17271727
}
1728-
else if((htim->State == HAL_TIM_STATE_READY))
1728+
else if(htim->State == HAL_TIM_STATE_READY)
17291729
{
17301730
if((pData == 0 ) && (Length > 0))
17311731
{
@@ -2512,11 +2512,11 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch
25122512
/* Check the parameters */
25132513
assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
25142514

2515-
if((htim->State == HAL_TIM_STATE_BUSY))
2515+
if(htim->State == HAL_TIM_STATE_BUSY)
25162516
{
25172517
return HAL_BUSY;
25182518
}
2519-
else if((htim->State == HAL_TIM_STATE_READY))
2519+
else if(htim->State == HAL_TIM_STATE_READY)
25202520
{
25212521
if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
25222522
{
@@ -3240,11 +3240,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
32403240
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
32413241
assert_param(IS_TIM_DMA_LENGTH(BurstLength));
32423242

3243-
if((htim->State == HAL_TIM_STATE_BUSY))
3243+
if(htim->State == HAL_TIM_STATE_BUSY)
32443244
{
32453245
return HAL_BUSY;
32463246
}
3247-
else if((htim->State == HAL_TIM_STATE_READY))
3247+
else if(htim->State == HAL_TIM_STATE_READY)
32483248
{
32493249
if((BurstBuffer == 0 ) && (BurstLength > 0))
32503250
{
@@ -3448,11 +3448,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B
34483448
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
34493449
assert_param(IS_TIM_DMA_LENGTH(BurstLength));
34503450

3451-
if((htim->State == HAL_TIM_STATE_BUSY))
3451+
if(htim->State == HAL_TIM_STATE_BUSY)
34523452
{
34533453
return HAL_BUSY;
34543454
}
3455-
else if((htim->State == HAL_TIM_STATE_READY))
3455+
else if(htim->State == HAL_TIM_STATE_READY)
34563456
{
34573457
if((BurstBuffer == 0 ) && (BurstLength > 0))
34583458
{

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_uart.c

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -1904,7 +1904,7 @@ static void UART_SetConfig(UART_HandleTypeDef *huart)
19041904
if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
19051905
{
19061906
/*------- UART-associated USART registers setting : BRR Configuration ------*/
1907-
if((huart->Instance == USART1))
1907+
if(huart->Instance == USART1)
19081908
{
19091909
huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
19101910
}
@@ -1916,7 +1916,7 @@ static void UART_SetConfig(UART_HandleTypeDef *huart)
19161916
else
19171917
{
19181918
/*------- UART-associated USART registers setting : BRR Configuration ------*/
1919-
if((huart->Instance == USART1))
1919+
if(huart->Instance == USART1)
19201920
{
19211921
huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
19221922
}

‎targets/TARGET_STM/TARGET_STM32L1/device/stm32l1xx_hal_usart.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -1873,7 +1873,7 @@ static void USART_SetConfig(USART_HandleTypeDef *husart)
18731873
CLEAR_BIT(husart->Instance->CR3, (uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
18741874

18751875
/*-------------------------- USART BRR Configuration -----------------------*/
1876-
if((husart->Instance == USART1))
1876+
if(husart->Instance == USART1)
18771877
{
18781878
husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate);
18791879
}

0 commit comments

Comments
 (0)