AllStarLink · ve7fet · Apr 10, 2025 · Apr 11, 2025
diff --git a/configs/rpt/rpt.conf b/configs/rpt/rpt.conf
@@ -152,11 +152,6 @@ linkunkeyct = ct8                   ; sent when a transmission received over the
 ;lnkactmacro = *52                  ; Function to execute when link activity timer expires.
 ;lnkacttimerwarn = 30seconds        ; Message to play when the link activity timer has 30 seconds left.
 
-;remote_inact_timeout =             ; Specifies the amount of time without keying from the link. Set to 0 to disable timeout. (15 * 60)
-;remote_timeout =                   ; Session time out for remote base. Set to 0 to disable. (60 * 60)
-;remote_timeout_warning_freq =      ; 30
-;remote_timeout_warning =           ; (3 * 60)
-
 ;nounkeyct = 0                      ; Set to a 1 to eliminate courtesy tones and associated delays.
 
 holdofftelem = 0                    ; Hold off all telemetry when signal is present on receiver or from connected nodes
@@ -182,10 +177,6 @@ parrotmode = 0                      ; 0 = Parrot Off (default = 0)
 parrottime = 1000                   ; Set the amount of time in milliseconds
                                     ; to wait before parroting what was received
 
-;rxnotch=1065,40                    ; (Optional) Notch a particular frequency for a specified
-                                    ; b/w. app_rpt must have been compiled with
-                                    ; the notch option
-
 ;startup_macro =                    ; Best use in your node stanza (below) when more than one node
 
 ;nodenames = /var/lib/asterisk/sounds/rpt/nodenames.callsign  ; Point to alternate nodename sound directory
@@ -224,6 +215,15 @@ parrottime = 1000                   ; Set the amount of time in milliseconds
 ;archivedir = /var/spool/asterisk/monitor ; top-level recording directory
 ;archiveformat = wav49                    ; audio format (default = wav49)
 
+; *** Data Acquisition Devices ***
+;
+; If you have a uChameleon DAQ device to configure, the configuration has 
+; been moved to daq.conf. Edit the necessary parameters in that file to 
+; configure the device. The line below should pull the configuration 
+; in, if it exists. A daq.conf.sample file is provided as a template 
+; of settings to configure.
+#tryinclude "custom/daq.conf"
+
 ;;; End of node-main template
 
 [functions]
@@ -416,50 +416,6 @@ parrottime = 1000                   ; Set the amount of time in milliseconds
 ; 964 = cop,64                      ; Send pre-configured APRStt notification, quietly (cop,64,CALL[,OVERLAYCHR])
 ; 965 = cop,65                      ; Send POCSAG page (equipped channel types only)
 
-; [functions-remote]
-;;;;; Functions for remote bases ;;;;;
-;
-; 0 = remote,1                      ; Retrieve Memory
-; 1 = remote,2                      ; Set freq.
-; 2 = remote,3                      ; Set TX PL tone
-; 3 = remote,4                      ; Set RX PL tone
-; 40 = remote,100                   ; RX PL off
-; 41 = remote,101                   ; RX PL on
-; 42 = remote,102                   ; TX PL off
-; 43 = remote,103                   ; TX PL on
-; 44 = remote,104                   ; Low Power
-; 45 = remote,105                   ; Medium Power
-; 46 = remote,106                   ; High Power
-; 711 = remote,107                  ; Bump -20
-; 714 = remote,108                  ; Bump -100
-; 717 = remote,109                  ; Bump -500
-; 713 = remote,110                  ; Bump +20
-; 716 = remote,111                  ; Bump +100
-; 719 = remote,112                  ; Bump +500
-; 721 = remote,113                  ; Scan - slow
-; 724 = remote,114                  ; Scan - quick
-; 727 = remote,115                  ; Scan - fast
-; 723 = remote,116                  ; Scan + slow
-; 726 = remote,117                  ; Scan + quick
-; 729 = remote,118                  ; Scan + fast
-; 79 = remote,119                   ; Tune
-; 51 = remote,5                     ; Long status query
-; 52 = remote,140                   ; Short status query
-; 67 = remote,210                   ; Send a *
-; 69 = remote,211                   ; Send a #
-; 91 = remote,99,CALLSIGN,LICENSETAG     ; Remote base login.
-                                    ; Define a different DTMF sequence for each user which is
-                                    ; authorized to use the remote base to control access to it.
-                                    ; For example 9139583=remote,99,WB6NIL,G would grant access to
-                                    ; the remote base and announce WB6NIL as being logged in.
-                                    ; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to
-                                    ; the remote base and announce WA6ZFT as being logged in.
-                                    ; When the remote base is disconnected from the originating node, the
-                                    ; user will be logged out. The LICENSETAG argument is used to enforce
-                                    ; TX frequency limits. See [txlimits] below.
-; 85 = cop,6                        ; Remote base telephone key
-
-
 [telemetry]
 ;;;;; Telemetry ;;;;;
 ; Telemetry entries can be shared across all repeaters, or defined for each repeater.
@@ -545,94 +501,13 @@ idwait = 100                        ; Time to wait before starting ID
 unkeywait = 100                     ; Time to wait after unkey before sending CT's and link telemetry
 calltermwait = 2000                 ; Time to wait before announcing "call terminated"
 
-[memory]
-;;;;; Remote base memories ;;;;;
-; Memories for remote bases (not for repeaters or hotspots). Seldom used.
-;00 = 146.580,100.0,m
-;01 = 147.030,103.5,m+t
-;02 = 147.240,103.5,m+t
-;03 = 147.765,79.7,m-t
-;04 = 146.460,100.0,m
-;05 = 146.550,100.0,m
-
 [macro]
 ;;;;;  Macro commands ;;;;;
 ;1 = *812000
 ;2 = *822000
 ;3 = *832000
 ;4 = *31998*32000
 
-;[daq-list]
-;;;;; Data Acquisition configuration ;;;;;
-;Where: device_name1 and device_name2 are stanzas you define in this file
-;device = daq-cham-1
-;device = device_name1
-;device = device_name2
-
-;[daq-cham-1]                       ; Defined in [daq-list]
-; Device name
-;hwtype = uchameleon                ; DAQ hardware type
-;devnode = /dev/ttyUSB0             ; DAQ device node (if required)
-;1 = inadc                          ; Pin definition for an ADC channel
-;2 = inadc
-;3 = inadc
-;4 = inadc
-;5 = inadc
-;6 = inadc
-;7 = inadc
-;8 = inadc
-;9 = inp                            ; Pin definition for an input with a weak pullup resistor
-;10 = inp
-;11 = inp
-;12 = inp
-;13 = in                            ; Pin definition for an input without a weak pullup resistor
-;14 = out                           ; Pin definition for an output
-;15 = out
-;16 = out
-;17 = out
-;18 = out
-
-;[meter-faces]
-;
-;face = scale(scalepre,scalediv,scalepost),word/?,...
-;
-; scalepre = offset to add before dividing with scalediv
-; scalediv = full scale/number of whole units (e.g. 256/20 or 12.8 for 20 volts).
-; scalepost = offset to add after dividing with scalediv
-;
-;face = range(X-Y:word,X2-Y2:word,...),word/?,...
-;face = bit(low-word,high-word),word/?,...
-;
-; word/? is either a word in /usr/share/asterisk/sounds or one of its subdirectories,
-; or a question mark which is  a placeholder for the measured value.
-;
-;
-; Battery voltage 0-20 volts
-;batvolts = scale(0,12.8,0),rpt/thevoltageis,?,ha/volts
-; 4 quadrant wind direction
-;winddir = range(0-33:north,34-96:west,97-160:south,161-224:east,225-255:north),rpt/thewindis,?
-; LM34 temperature sensor with 130 deg. F full scale
-;lm34f = scale(0,1.969,0),rpt/thetemperatureis,?,degrees,fahrenheit
-; Status poll (non alarmed)
-;light = bit(ha/off,ha/on),ha/light,?
-
-;[alarms]
-;
-;tag = device,pin,node,ignorefirst,func-low,func-hi
-;
-;tag = a unique name for the alarm
-;device = daq device to poll
-;pin = the device pin to be monitored
-;ignorefirstalarm = set to 1 to throwaway first alarm event, or 0 to report it
-;node = the node number to execute the function on
-;func-low = the DTMF function to execute on a high to low transition
-;func-high = the DTMF function to execute on a low to high transition
-;
-; a  '-' as a function name is shorthand for no-operation
-;
-;door = daq-cham-1,9,1,2017,*7,-
-;pwrfail = daq-cham-1,10,0,2017,*911111,-
-
 [events]
 ;;;;; Events Management ;;;;;
 ;status,2 = c|f|RPT_NUMLINKS               ; Say time of day when all links disconnect.
@@ -671,3 +546,15 @@ rxchannel = SimpleUSB/1999      ; SimpleUSB
 ;startup_macro = *8132000
 ;morse = morse_1998                 ; Sample morse stanza for node 1998
 
+;;;;;;;;;;;;;;;;;;; Another node settings here ;;;;;;;;;;;;;;;;;;;
+;If you want to configure a remote base, be sure to set your 
+;rxchannel as appropriate, then configure the rest of the node 
+;settings in remotebase.conf.
+;
+;A remotebase.conf.sample has been provided with a sample of settings 
+;to configure. Place your .conf file in the path shown below, and 
+;uncomment these lines to pull the configuration in.
+;[1997](node-main)
+;rxchannel = SimpleUSB/1998
+;#tryinclude "custom/remotebase.conf"
+
diff --git a/configs/samples/daq.conf.sample b/configs/samples/daq.conf.sample
@@ -0,0 +1,73 @@
+; This is a sample configuration file for interfacing with a uChameleon 
+; Data Acquisition Device (DAQ).
+;
+;[daq-list]
+;;;;; Data Acquisition configuration ;;;;;
+;Where: device_name1 and device_name2 are stanzas you define in this file
+;device = daq-cham-1
+;device = device_name1
+;device = device_name2
+
+;[daq-cham-1]                       ; Defined in [daq-list]
+; Device name
+;hwtype = uchameleon                ; DAQ hardware type
+;devnode = /dev/ttyUSB0             ; DAQ device node (if required)
+;1 = inadc                          ; Pin definition for an ADC channel
+;2 = inadc
+;3 = inadc
+;4 = inadc
+;5 = inadc
+;6 = inadc
+;7 = inadc
+;8 = inadc
+;9 = inp                            ; Pin definition for an input with a weak pullup resistor
+;10 = inp
+;11 = inp
+;12 = inp
+;13 = in                            ; Pin definition for an input without a weak pullup resistor
+;14 = out                           ; Pin definition for an output
+;15 = out
+;16 = out
+;17 = out
+;18 = out
+
+;[meter-faces]
+;
+;face = scale(scalepre,scalediv,scalepost),word/?,...
+;
+; scalepre = offset to add before dividing with scalediv
+; scalediv = full scale/number of whole units (e.g. 256/20 or 12.8 for 20 volts).
+; scalepost = offset to add after dividing with scalediv
+;
+;face = range(X-Y:word,X2-Y2:word,...),word/?,...
+;face = bit(low-word,high-word),word/?,...
+;
+; word/? is either a word in /usr/share/asterisk/sounds or one of its subdirectories,
+; or a question mark which is  a placeholder for the measured value.
+;
+;
+; Battery voltage 0-20 volts
+;batvolts = scale(0,12.8,0),rpt/thevoltageis,?,ha/volts
+; 4 quadrant wind direction
+;winddir = range(0-33:north,34-96:west,97-160:south,161-224:east,225-255:north),rpt/thewindis,?
+; LM34 temperature sensor with 130 deg. F full scale
+;lm34f = scale(0,1.969,0),rpt/thetemperatureis,?,degrees,fahrenheit
+; Status poll (non alarmed)
+;light = bit(ha/off,ha/on),ha/light,?
+
+;[alarms]
+;
+;tag = device,pin,node,ignorefirst,func-low,func-hi
+;
+;tag = a unique name for the alarm
+;device = daq device to poll
+;pin = the device pin to be monitored
+;ignorefirstalarm = set to 1 to throwaway first alarm event, or 0 to report it
+;node = the node number to execute the function on
+;func-low = the DTMF function to execute on a high to low transition
+;func-high = the DTMF function to execute on a low to high transition
+;
+; a  '-' as a function name is shorthand for no-operation
+;
+;door = daq-cham-1,9,1,2017,*7,-
+;pwrfail = daq-cham-1,10,0,2017,*911111,-
diff --git a/configs/samples/remotebase.conf.sample b/configs/samples/remotebase.conf.sample
@@ -0,0 +1,66 @@
+; This is a sample configuration file for configuring a remote base.
+;
+;functions = functions-remote       ; Repeater Function stanza
+;phone_functions = functions-remote ; Phone Function stanza
+;memory = memory                    ; Memory channel stanza
+
+;remote = ft897                     ; Configure remote base radio type
+;ioport = /dev/ttyS1                ; Serial port for control
+
+;remote_inact_timeout =             ; Specifies the amount of time without keying from the link. Set to 0 to disable timeout. (15 * 60)
+;remote_timeout =                   ; Session time out for remote base. Set to 0 to disable. (60 * 60)
+;remote_timeout_warning_freq =      ; 30
+;remote_timeout_warning =           ; (3 * 60)
+
+; [functions-remote]
+;;;;; Functions for remote bases ;;;;;
+;
+; 0 = remote,1                      ; Retrieve Memory
+; 1 = remote,2                      ; Set freq.
+; 2 = remote,3                      ; Set TX PL tone
+; 3 = remote,4                      ; Set RX PL tone
+; 40 = remote,100                   ; RX PL off
+; 41 = remote,101                   ; RX PL on
+; 42 = remote,102                   ; TX PL off
+; 43 = remote,103                   ; TX PL on
+; 44 = remote,104                   ; Low Power
+; 45 = remote,105                   ; Medium Power
+; 46 = remote,106                   ; High Power
+; 711 = remote,107                  ; Bump -20
+; 714 = remote,108                  ; Bump -100
+; 717 = remote,109                  ; Bump -500
+; 713 = remote,110                  ; Bump +20
+; 716 = remote,111                  ; Bump +100
+; 719 = remote,112                  ; Bump +500
+; 721 = remote,113                  ; Scan - slow
+; 724 = remote,114                  ; Scan - quick
+; 727 = remote,115                  ; Scan - fast
+; 723 = remote,116                  ; Scan + slow
+; 726 = remote,117                  ; Scan + quick
+; 729 = remote,118                  ; Scan + fast
+; 79 = remote,119                   ; Tune
+; 51 = remote,5                     ; Long status query
+; 52 = remote,140                   ; Short status query
+; 67 = remote,210                   ; Send a *
+; 69 = remote,211                   ; Send a #
+; 91 = remote,99,CALLSIGN,LICENSETAG     ; Remote base login.
+                                    ; Define a different DTMF sequence for each user which is
+                                    ; authorized to use the remote base to control access to it.
+                                    ; For example 9139583=remote,99,WB6NIL,G would grant access to
+                                    ; the remote base and announce WB6NIL as being logged in.
+                                    ; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to
+                                    ; the remote base and announce WA6ZFT as being logged in.
+                                    ; When the remote base is disconnected from the originating node, the
+                                    ; user will be logged out. The LICENSETAG argument is used to enforce
+                                    ; TX frequency limits. See [txlimits] below.
+; 85 = cop,6                        ; Remote base telephone key
+
+[memory]
+;;;;; Remote base memories ;;;;;
+; Memories for remote bases (not for repeaters or hotspots). Seldom used.
+;00 = 146.580,100.0,m
+;01 = 147.030,103.5,m+t
+;02 = 147.240,103.5,m+t
+;03 = 147.765,79.7,m-t
+;04 = 146.460,100.0,m
+;05 = 146.550,100.0,m