Az.Site - First preview release

src/Site/Site.Autorest/.gitattributes

@@ -0,0 +1 @@
+* text=auto

src/Site/Site.Autorest/.gitignore

@@ -0,0 +1,16 @@
+bin
+obj
+.vs
+generated
+internal
+exports
+tools
+test/*-TestResults.xml
+license.txt
+/*.ps1
+/*.psd1
+/*.ps1xml
+/*.psm1
+/*.snk
+/*.csproj
+/*.nuspec

src/Site/Site.Autorest/Properties/AssemblyInfo.cs

@@ -0,0 +1,26 @@
+// Copyright (c) Microsoft Corporation. All rights reserved.
+// Licensed under the Apache License, Version 2.0 (the ""License"");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an ""AS IS"" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
+// is regenerated.
+
+using System;
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+[assembly: System.Reflection.AssemblyCompanyAttribute("Microsoft")]
+[assembly: System.Reflection.AssemblyCopyrightAttribute("Copyright © Microsoft")]
+[assembly: System.Reflection.AssemblyProductAttribute("Microsoft Azure PowerShell")]
+[assembly: System.Reflection.AssemblyTitleAttribute("Microsoft Azure PowerShell - Site")]
+[assembly: System.Reflection.AssemblyFileVersionAttribute("0.1.0.0")]
+[assembly: System.Reflection.AssemblyVersionAttribute("0.1.0.0")]
+[assembly: System.Runtime.InteropServices.ComVisibleAttribute(false)]
+[assembly: System.CLSCompliantAttribute(false)]

src/Site/Site.Autorest/README.md

@@ -0,0 +1,173 @@
+<!-- region Generated -->
+# Az.Site
+This directory contains the PowerShell module for the Site service.
+
+---
+## Info
+- Modifiable: yes
+- Generated: all
+- Committed: yes
+- Packaged: yes
+
+---
+## Detail
+This module was primarily generated via [AutoRest](https://github.com/Azure/autorest) using the [PowerShell](https://github.com/Azure/autorest.powershell) extension.
+
+## Module Requirements
+- [Az.Accounts module](https://www.powershellgallery.com/packages/Az.Accounts/), version 2.7.5 or greater
+
+## Authentication
+AutoRest does not generate authentication code for the module. Authentication is handled via Az.Accounts by altering the HTTP payload before it is sent.
+
+## Development
+For information on how to develop for `Az.Site`, see [how-to.md](how-to.md).
+<!-- endregion -->
+
+<!-- region Generated -->
+# Az.Site
+This directory contains the PowerShell module for the Site service.
+
+### AutoRest Configuration
+> see https://aka.ms/autorest
+
+``` yaml
+require:
+# readme.azure.noprofile.md is the common configuration file
+  - $(this-folder)/../../readme.azure.noprofile.md
+input-file:
+# You need to specify your swagger files here.
+  - $(repo)/specification/edge/resource-manager/Microsoft.Edge/sites/stable/2025-06-01/sites.json
+
+commit: 3d1eea900f369f1a655c9bbb4fff4bf4657a7d75
+# If the swagger has not been put in the repo, you may uncomment the following line and refer to it locally
+# - (this-folder)/relative-path-to-your-swagger 
+
+# For new RP, the version is 0.1.0
+module-version: 0.1.0
+# Normally, title is the service name
+title: Site
+inlining-threshold: 50
+
+directive:
+  # Following are common directives which are normally required in all the RPs
+  # 1. Remove the unexpanded parameter set
+  # 2. For New-* cmdlets, ViaIdentity is not required
+  # Following two directives are v4 specific
+  - where:
+      variant: ^(Create|Update|CreateViaIdentity|CreateViaIdentityExpanded|UpdateViaIdentity)(?!.*?(Expanded|JsonFilePath|JsonString))
+    remove: true
+  # Follow directive is v3 specific. If you are using v3, uncomment following directive and comments out two directives above
+  #- where:
+  #    variant: ^Create$|^CreateViaIdentity$|^CreateViaIdentityExpanded$|^Update$|^UpdateViaIdentity$
+  #  remove: true
+
+  # Remove the set-* cmdlet
+  - where:
+      verb: Set
+    remove: true
+
+  # Hide ALL scope-specific cmdlets to allow custom unified cmdlets
+  - where:
+      subject: SitesBySubscription
+    hide: true
+  - where:
+      subject: SitesByServiceGroup
+    hide: true
+
+  # Hide ALL base resource group scope cmdlets (our custom unified cmdlets replace them)
+  - where:
+      verb: Get
+      subject: Site
+    hide: true
+  - where:
+      verb: New
+      subject: Site
+    hide: true
+  - where:
+      verb: Remove
+      subject: Site
+    hide: true
+  - where:
+      verb: Update
+      subject: Site
+    hide: true
+
+  # Parameter customizations for better user experience
+  - where:
+      parameter-name: Label
+    set:
+      parameter-name: Labels
+
+  # Remove SiteAddress prefix from address-related parameters
+  - where:
+      parameter-name: SiteAddressCity
+    set:
+      parameter-name: City
+
+  - where:
+      parameter-name: SiteAddressCountry
+    set:
+      parameter-name: Country
+
+  - where:
+      parameter-name: SiteAddressPostalCode
+    set:
+      parameter-name: PostalCode
+
+  - where:
+      parameter-name: SiteAddressStateOrProvince
+    set:
+      parameter-name: StateOrProvince
+
+  - where:
+      parameter-name: SiteAddressStreetAddress1
+    set:
+      parameter-name: StreetAddress1
+
+  - where:
+      parameter-name: SiteAddressStreetAddress2
+    set:
+      parameter-name: StreetAddress2
+
+  - where:
+      property-name: Label
+    set:
+      property-name: Labels
+
+  # Remove Address prefix from address-related properties  
+  - where:
+      property-name: AddressCity
+    set:
+      property-name: City
+
+  - where:
+      property-name: AddressCountry
+    set:
+      property-name: Country
+
+  - where:
+      property-name: AddressPostalCode
+    set:
+      property-name: PostalCode
+
+  - where:
+      property-name: AddressStateOrProvince
+    set:
+      property-name: StateOrProvince
+
+  - where:
+      property-name: AddressStreetAddress1
+    set:
+      property-name: StreetAddress1
+
+  - where:
+      property-name: AddressStreetAddress2
+    set:
+      property-name: StreetAddress2
+
+  - where:
+      parameter-name: SiteName
+    set:
+      alias: Name
+
+```

src/Site/Site.Autorest/custom/Az.Site.custom.psm1

@@ -0,0 +1,17 @@
+# region Generated 
+  # Load the private module dll
+  $null = Import-Module -PassThru -Name (Join-Path $PSScriptRoot '..\bin\Az.Site.private.dll')
+
+  # Load the internal module
+  $internalModulePath = Join-Path $PSScriptRoot '..\internal\Az.Site.internal.psm1'
+  if(Test-Path $internalModulePath) {
+    $null = Import-Module -Name $internalModulePath
+  }
+
+  # Export nothing to clear implicit exports
+  Export-ModuleMember
+
+  # Export script cmdlets
+  Get-ChildItem -Path $PSScriptRoot -Recurse -Include '*.ps1' -File | ForEach-Object { . $_.FullName }
+  Export-ModuleMember -Function (Get-ScriptCmdlet -ScriptFolder $PSScriptRoot) -Alias (Get-ScriptCmdlet -ScriptFolder $PSScriptRoot -AsAlias)
+# endregion