JCSDA CRTM v2.3.x Build Instructions
====================================

$Revision: 99117 $


CRTM SUPPORT EMAIL: ncep.list.emc.jcsda_crtm.support@noaa.gov

If you have problems building the library please include the
generated "config.log" file in your email correspondence.



            Contents
  ===============================
  1. Configuration
    a. The easy (I hope) way
    b. The more flexible way
  2. Building the library
  3. Testing the library
  4. Installing the library
    a. GNU Install
         - Linking to the library
    b. NCO Install
         - Linking to the library
    c. Uninstalling the library
  5. Cleaning up
  6. Feedback and contact info




1. CONFIGURATION
================

The CRTM tarball directory structure looks like:
 ./
  |-README  .................. this file
  |-configure  ............... configuration script
  |-Makefile.in  ............. makefile template
  |-config-setup/  ........... "courtesy" configuration definition scripts 
  |-fix/  .................... coefficient datafiles
  `-libsrc/  ................. library source files


The build system for the CRTM uses an autoconf-generated configure script.

The build makefiles now assume that environment variables (envars) will
be defined that describe the compilation environment. The envars
that *must* be defined are:
  FC:      the Fortran95/2003 compiler executable,
  FCFLAGS: the flags/switches provided to the Fortran compiler,



a. The easy (I hope) way...
-------------------------

Several shell (and C shell) source files are provided for the compilers to
which we have access and have tested here. These shell source files are in
the "config-setup/" subdirectory of the tarball.

The current list of test compiler environments in the config-setup/ directory
are:

  $ ls  config-setup/
  ftn.setup                 ftn.setup.csh
  g95-debug.setup           gfortran.setup.csh     pgf95.setup
  g95-debug.setup.csh       ifort-debug.setup      pgf95.setup.csh
  g95.setup                 ifort-debug.setup.csh  xlf2003-debug.setup
  g95.setup.csh             ifort.setup            xlf2003-debug.setup.csh
  gfortran-debug.setup      ifort.setup.csh        xlf2003.setup
  gfortran-debug.setup.csh  pgf95-debug.setup      xlf2003.setup.csh
  gfortran.setup            pgf95-debug.setup.csh

All of the above files define values for the envars FC, FCFLAGS, LDFLAGS,
and LIBS.

To use these files to define the CRTM build environment, you should source
them. For example, if you use the sh/bash/ksh shells and you want to setup
for a build using the gfortran compiler using debug options you would type:

  $ . config-setup/gfortran-debug.setup

If you are a C shell aficionado, the equivalent command would be

  % source config-setup/gfortran-debug.setup.csh

You can tailor you build environment by modifying the relevant build
configuration setup file in the "config-setup/" subdirectory.

Or, if you are going to be testing library builds multiple times, create your
own configuration setup file.

Once you've sourced the setup file, you run the configuration script like so:

  $ ./configure --prefix=<install directory>

The --prefix switch sets the installation directory and defaults to /usr/local so
make sure you set it to a directory in which you have write access.

By default, the CRTM is built for big-endian I/O. The --disable-big-endian switch
builds the library and test programs for little-endian I/O:

  $ ./configure --disable-big-endian --prefix=<install directory>



b. The more flexible way
------------------------

If you need more flexibility in the library build you can specify the necessary
information directly to the configure script that generates the makefiles. For
example, for the intel ifort compiler:
	
  $ ./configure --prefix=${PWD} \
                --disable-big-endian \
                FC="ifort" \
                FCFLAGS="-O3 -g -traceback"

The --prefix switch sets the installation directory and defaults to /usr/local so
make sure you set it to a directory in which you have write access.

The --disable-big-endian switch builds the library and test programs for little-endian
I/O. The default is big-endian I/O.

NOTE: The --disable-big-endian switch (whether it's turned on or off) modifies the
      compilation environment by setting (or deselecting) the compiler switches
      that control the endian-ness of the I/O. As such, you should be careful if
      you set those compiler switches directly on the command line via FCFLAGS.




2. BUILDING THE LIBRARY
=======================

To start the library build for a particular configuration, simply type

  $ make




3. CHECKING THE LIBRARY BUILD
=============================

To run the accompanying tests using the just-built library, simply type

  $ make check

This will build and run any tests. The current output from the (successful)
test runs looks like:

  ========================================
    Running test: big-endian I/O on little-endian platform...


       **********************************************************
                               check_crtm

        Check/example program for the CRTM Forward and K-Matrix 
        functions using big_endian coefficient datafiles

        CRTM Version: REL-2.3.x
       **********************************************************


       Initializing the CRTM...

       Processing a total of 421 channels...
         399 from cris399_npp
         22 from atms_npp

       Calling the CRTM functions for cris399_npp...

       Calling the CRTM functions for atms_npp...

       Destroying the CRTM...

    TEST SUCCESSFUL!
  ========================================




4. INSTALLING THE LIBRARY
=========================

Installation of the library *always* occurs into its own directory within the
directory specified by the --prefix switch. The name of the installation
directory follows the convention:

  <library name>_<version>

So, if a library version (say, v2.3.0) build was configured with --prefix=$PWD
then the installation directory will be

  ${PWD}/crtm_v2.3.0



a. GNU Install
--------------

To perform a GNU-type install, type:

  $ make install

For a library version, say, v2.3.0, this will create a directory called
"crtm_v2.3.0". That directory structure is shown below:

  crtm_v2.3.0/
    |
    |--include/
    |    |
    |    |--accoeff_binary_io.mod
    |    |--accoeff_define.mod
    |    ...etc...
    |    |--zeeman_input_define.mod
    |    `--zeeman_utility.mod
    |
    `--lib/
         |
         `--libcrtm.a

Note that the only version-numbered item in this type of install is the name of
the installation directory itself.


Linking to the library
......................

Let's assume the above install was moved into "/usrx/local/nceplibs", to use the
library in this structure in your own application, the usual environment variables
would be modified something like:

  libroot="/usrx/local/nceplibs/crtm_v2.3.0"
  FCFLAGS="-I${libroot}/include ${FCFLAGS}"
  LDFLAGS="-L${libroot}/lib ${LDFLAGS}"
  LIBS="-lcrtm"

(with appropriate syntax changes for csh)



b. NCO Install
--------------

To install the library conforming to the NCO directory organisation and naming
conventions, type:

  $ make nco_install

For a library version, say, v2.3.0, this will create a directory called
"crtm_v2.3.0". That directory is organised according to the current NCO structure
on WCOSS in /nwprod/lib, as shown below:

  crtm_v2.3.0/
    |
    |--libcrtm_v2.3.0.a
    |
    `--incmod/
         |
         `--crtm_v2.3.0/
              |
              |--accoeff_binary_io.mod
              |--accoeff_define.mod
              ...etc..
              |--zeeman_input_define.mod
              `--zeeman_utility.mod

The contents of the "crtm_v2.3.0" directory can then be moved into the official
/nwprod/lib location as needed.

NOTE: ********** IMPORTANT - READ THIS **********
      To avoid installing over the top of an existing installation, this NCO-style
      installation *DOES NOT* install the CRTM into an existing directory. If the
      installation directory already exists, an error is issued and the installation
      process halts.
      ********** IMPORTANT - HAVE YOU READ IT? **********


Linking to the library
......................

Let's assume the above install was moved into "/usrx/local/nceplibs", to use the
library in this structure in your own application, the usual environment variables
would be modified something like:

  libroot="/usrx/local/nceplibs"
  FCFLAGS="-I${libroot}/incmod/crtm_v2.3.0 ${FCFLAGS}"
  LDFLAGS="-L${libroot} ${LDFLAGS}"
  LIBS="-lcrtm_v2.3.0"
  
(with appropriate syntax changes for csh)



c. Uninstalling the library
---------------------------

To uninstall the library (assuming you haven't moved the installation directory
contents somewhere else) you can type:

  $ make uninstall
 
This will DELETE the created installation directory. So, for a library version,
say, v2.3.0, if your configure script invocation was something like

  $ ./configure --prefix=${PWD} ...other command line arguments...

then the "uninstall" target will delete the "${PWD}/crtm_v2.3.0" directory.




5. CLEANING UP
==============

Two targets are provided for cleaning up after the build. To remove all the
build products type

  $ make clean

To also remove all the configuration products (i.e. the makefiles) type

  $ make distclean




6. FEEDBACK AND CONTACT INFO
============================

That's pretty much it. Any questions or bug reports can be sent to CRTM Support.

  CRTM SUPPORT EMAIL: ncep.list.emc.jcsda_crtm.support@noaa.gov

If you have problems building the library please include the generated "config.log"
file in your email correspondence.