Release 25.9

changelog/2025/september.rst

@@ -0,0 +1,161 @@
+--------------------------------------------------------------------------------
+                                      New                                       
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Added parser for ShowMonitorEventTraceCryptoIpsecEventAll
+        * 'show monitor event-trace crypto ipsec event all'
+    * Added ShowPlatformHardwareQfpActiveFeatureIpsecSa3
+        * Added schema and parser for 'show platform hardware qfp active feature ipsec sa 3'
+    * Added  ShowIdpromFantrayEepromDetail schema and parser
+        * Added schema and parser for show idprom fan-tray {fantray_num} eeprom detail
+    * Added ShowPlatformHardwareQfpActiveFeatureFirewallDrop
+        * show platform hardware qfp active feature firewall drop
+        * show platform hardware qfp active feature firewall drop all
+        * show platform hardware qfp active feature firewall drop clear
+        * show platform hardware qfp active feature firewall drop verbose
+    * Added ShowL2tp
+        * show l2tp
+    * Added ShowPlatformHardwareQfpActiveFeatureNatDatapathGate parser.
+        * Added parser for cli 'show platform hardware qfp active feature nat datapath gatein'.
+        * Added parser for cli 'show platform hardware qfp active feature nat datapath gateout'.
+    * Modified ShowInterfacesTransceiverSupportedlist
+        * Added new Cisco p/n min format parser for show interfaces transceiver supported list
+    * Added ShowMonitorEventTraceCryptoAllDetail Parser for
+        * Parser for 'show monitor event-trace crypto all detail'
+    * Added ShowMonitorEventTraceCryptoFromBoot Parser for
+        * Parser for 'show monitor event-trace crypto from-boot'
+        * Parser for 'show monitor event-trace crypto from-boot {timer}'
+    * Added Parser for show platform hardware cpp active system state
+        * Added a new schema and parser for the show platform hardware cpp active system state command.
+        * Supports parsing CPP system state information including component status, platform state, HA state, client state, image information, load count, active threads, and fault manager flags.
+        * Handles component initialization status (cpp_cp, cpp_sp, FMAN-FP, cpp_driver0).
+        * Parses hierarchical state information with proper data type conversion.
+    * Added ShowVlans
+    * 'show vlans <vlan-id>'
+    * Added  ShowPlatformHardwareQfpActiveFeatureNatDatapathEsp schema and parser
+        * Added schema and parser for show platform hardware qfp active feature nat datapath esp
+    * Added ShowPlatformHardwareChassisRpFanSpeedControlData
+    * Added parser for Show Platform Hardware Chassis Rp FanSpeedControlData
+    * Added parser for hw-module beacon fan-tray fantray_num status
+    * Added ShowX25Vc parser in show_x25.py
+        * Added schema and parser for cli 'show x25 vc'
+    * Added ShowPlatformSoftwareNatFpActiveMappingStatic
+        * Added ShowPlatformSoftwareNatFpActiveMappingStaticSchema
+        * Added parser for "show platform software nat fp active mapping static"
+    * Added ShowCefTableConsistencyCheck parser in show_cef.py
+        * Added schema and parser for cli 'show cef table consistency-check'
+    * Added parser for ShowAlignment
+        * 'show alignment'
+    * Added ShowMkaSessionDetail
+        * show mka session detail
+            * *New**
+    * Added** ShowCtsCredentials *parser.**
+        * Added parser for cli 'show cts credentials'.**
+    * Added ShowRunningConfigVrf
+        * show running-config vrf
+    * Added ShowPlatformHardwareQfpActiveFeatureFirewallRuntime
+        * show platform hardware qfp active feature firewall runtime
+    * Added ShowPlatformSoftwareFirewallRPActiveZones
+        * sh ipv6 mfib {group} active
+    * Modified ShowVoiceDsp
+        * show voice dsp
+    * Added ShowPlatformHardwareQfpActiveFeatureTdDatapathStatistics parser
+        * Added schema and parser for 'show platform hardware qfp active feature td datapath statistics'
+    * Added ShowPlatformHardwareQfpActiveFeatureEvcClientL2cpActionsInterface
+    * 'show platform hardware qfp active feature evc client l2cp-actions interface GigabitEthernet0/0/4.EFP1'
+    * Added ShowRomMonitor parser in show_romvar.py
+        * Added schema and parser for cli 'show rom-monitor 0'
+    * Added ShowIpBgpNeighborReceivedPrefixFilter schema and parser
+        * Added schema and parser for show ip bgp neighbors {neighbor} received prefix-filter and show ip bgp {address_family} vrf {vrf} neighbors {neighbor} received prefix-filter
+    * Added ShowPlatformHardwareChassisFantrayDetailAll
+        * Added parser for "show platform hardware chassis fantray detail all"
+    * Added ShowPowerDetail
+        * Added schema and parser for'show power detail' under 9610c folder for iosxe
+
+* iosxr
+    * Added `ShowSubscriberSessionAllSummary` Parser
+        * Added schema and parser for `show subscriber session all summary` command.
+    * Added Parsers for below OSPFv3 show commands
+        * show ospfv3 vrf all-inclusive database ext-router
+        * show ospfv3 topology detail
+        * show ospfv3 topology prefixes
+    * Added Parsers for below lslib_server show commands
+        * show lslib server producer detail
+        * show lslib server producer {name} instance-id {id}
+        * show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type node detail
+        * show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type link detail
+        * show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type ipv6-prefix detail
+
+* nxos
+    * Added ShowKeyChain parser.
+        * Added parser for cli show key chain {key_chain_name}.
+        * Added parser for cli show key chain {key_chain_name} detail.
+
+
+--------------------------------------------------------------------------------
+                                      Fix                                       
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Added fix for ShowPlatformHardwareFedSwitchFwdAsicInsightAclTableDef parser.
+        * Added this fix to support multiple acl_entries.
+    * Modified ShowInterfaceEtherchannel
+        * 'show interface {interface_id} etherchannel'
+    * Modified ShowInterfaces
+    * 'show interfaces Serial0/3/1'
+    * genie.libs.parser.iosxe.rv1.show_platform
+        * Added regex to parse platform output when model, hw_ver and sw_ver are N/A
+    * Modified ShowPolicyMapTypeInspectZonePairSessions
+        * 'show policy-map type inspect zone-pair sessions'
+    * Modified ShowPlatformPacketTracePacket
+        * 'show platform packet-trace packet {packet_id}'
+    * Added YANG parser for ShowSystemIntegrityAllCompliance
+    * Modified ShowPlatformHardwareAuthenticationStatus
+        * Added missing optional attributes to schema for 10-slot chassis.
+    * Modified ShowStandbyAll parser
+        * Updated regex for the state changes line and improved parsing of the last state change time to accommodate various output formats.
+
+* iosxr
+    * Modified ShowPlatform for `ASR-9903` with `IOS-XR v7.8.2`
+        * Updated regex pattern <p1> to accommodate various outputs
+            * Changed whitespace before <plim> to use \s+ (was a single space) for variable spacing.
+            * Made <config_state> optional by wrapping it in a non-capturing group.
+        * Ensures lines without a "Config state" column are parsed (e.g., `0/0/1             A9903-20HG-PEC             OK`).
+
+* nxos
+    * Fixed ShowEnvironmentPowerDetail parser.
+        * Fixed parser for cli show environment power detail.
+
+
+--------------------------------------------------------------------------------
+                                    Modified                                    
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Modified show environment power cache parser in iosxe/ie3k
+        * Modified parser for show environment power in iosxe/ie3k
+    * Updated ShowUACUplinkDB parser
+        * Added support for "IPV4 Preferred Uplink" and "IPV6 Preferred Uplink".
+        * Added support for optional "Allowed" field in interface tables.
+        * Improved parsing logic for various output formats.
+    * Modified ShowIpRouteWord parser
+        * Fixed p5 where the parser was not correctly handling routes with specific keywords such as "directly connected" and "via".
+        * Fixed p8 where the parser was not correctly capturing the metric and next-hop information for certain route types.
+    * Modified ShowIpPolicy parser
+        * Added support for IPv6 policy parsing in addition to existing IPv4 policy parsing.
+
+* fix resolve syntaxwarnings from invalid escape sequences
+    * Updated regex patterns to use raw strings (r"...") or escaped backslashes
+    * Eliminated SyntaxWarnings (e.g., '\d', '\S') during runtime
+
+
+--------------------------------------------------------------------------------
+                                     Modify                                     
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Modified ShowEnvironmentAlarmContact in iosxe/ie3k
+        * Modified parser for "show environment alarm-contact" in iosxe/ie3k
+
+