Merge master-localization into master

doc/distrib/NodeHelpFiles/cs-CZ/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Podrobnosti
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+Uzel `TSplineTopology.InnerVertices` vrací vrcholy v rámci dané topologie. V příkladu níže je vytvořen povrch TSpline a potom jsou vnitřní vrcholy vráceny v uzlu `TSplineTopology.InnerVertices`.
 
 ## Vzorový soubor
 

doc/distrib/NodeHelpFiles/de-DE/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## Im Detail
-Stutzen Sie überlappende Elemente bis zur Oberflächenbegrenzung.
+Stutzen Sie überlappende Panels bis zur Oberflächenbegrenzung.
 ___
 ## Beispieldatei
 

doc/distrib/NodeHelpFiles/de-DE/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Im Detail
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` gibt die Scheitelpunkte innerhalb der angegebenen Topologie zurück. Im folgenden Beispiel wird eine TSpline-Oberfläche erstellt, und anschließend werden die inneren Scheitelpunkte mit `TSplineTopology.InnerVertices` zurückgegeben.
 
 ## Beispieldatei
 

doc/distrib/NodeHelpFiles/es-ES/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,4 +1,4 @@
-## En detalle:
+## En detalle
 Recorte paneles solapados según el contorno de superficie.
 ___
 ## Archivo de ejemplo

doc/distrib/NodeHelpFiles/es-ES/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## En detalle
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` devuelve los vértices dentro de la topología especificada. En el ejemplo siguiente, se crea una superficie TSpline y, a continuación, se devuelven los vértices interiores con `TSplineTopology.InnerVertices`.
 
 ## Archivo de ejemplo
 

doc/distrib/NodeHelpFiles/fr-FR/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## Description approfondie
-Ajustez les panneaux qui se chevauchent jusqu'à la délimitation de la surface.
+Ajustez les panneaux qui se chevauchent jusqu'à la limite de la surface.
 ___
 ## Exemple de fichier
 

doc/distrib/NodeHelpFiles/fr-FR/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
-## Profondeur
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+## Description approfondie
+'TSplineTopology.InnerVertices' renvoie les sommets dans la topologie donnée. Dans l'exemple ci-dessous, une surface T-Spline est créée, puis les sommets internes sont renvoyés avec 'TSplineTopology.InnerVertices'.
 
 ## Exemple de fichier
 

doc/distrib/NodeHelpFiles/it-IT/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## In profondità
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` restituisce i vertici all'interno della topologia specificata. Nell'esempio seguente, viene creata una superficie TSpline e vengono quindi restituiti i vertici interni con `TSplineTopology.InnerVertices`.
 
 ## File di esempio
 

doc/distrib/NodeHelpFiles/ja-JP/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## 詳細
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` は、指定されたトポロジ内の頂点を返します。次の例では、T スプライン サーフェスが作成され、次に `TSplineTopology.InnerVertices` を使用して内側の頂点が返されます。
 
 ## サンプル ファイル
 

doc/distrib/NodeHelpFiles/ko-KR/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## 상세
-겹치는 패널을 표면 경계에 맞게 자릅니다.
+겹치는 패널을 표면 경계까지 자릅니다.
 ___
 ## 예제 파일
 

doc/distrib/NodeHelpFiles/ko-KR/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## 상세
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices`는 지정된 위상 내의 정점을 반환합니다. 아래 예제에서는 TSpline 표면이 작성된 후, `TSplineTopology.InnerVertices`를 통해 내부 정점이 반환됩니다.
 
 ## 예제 파일
 

doc/distrib/NodeHelpFiles/pl-PL/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Informacje szczegółowe
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+Węzeł `TSplineTopology.InnerVertices` zwraca wierzchołki w danej topologii. W poniższym przykładzie tworzona jest powierzchnia TSpline, a następnie za pomocą węzła `TSplineTopology.InnerVertices` zwracane są wierzchołki wewnętrzne.
 
 ## Plik przykładowy
 

doc/distrib/NodeHelpFiles/pt-BR/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## Em profundidade
-Recorte painéis sobrepostos para o limite da superfície.
+Corte os painéis sobrepostos até o limite da superfície.
 ___
 ## Arquivo de exemplo
 

doc/distrib/NodeHelpFiles/pt-BR/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
-## Aprofundado
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+## Em profundidade
+`TSplineTopology.InnerVertices` retorna os vértices dentro da topologia fornecida. No exemplo abaixo, uma superfície TSpline é criada e, em seguida, os vértices internos são retornados com `TSplineTopology.InnerVertices`.
 
 ## Arquivo de exemplo
 

doc/distrib/NodeHelpFiles/ru-RU/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Подробности
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` возвращает вершины заданной топологии. В приведенном ниже примере создается Т-сплайновая поверхность, после чего возвращаются внутренние вершины с помощью узла `TSplineTopology.InnerVertices`.
 
 ## Файл примера
 

doc/distrib/NodeHelpFiles/zh-CN/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## 详细
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+“TSplineTopology.InnerVertices”返回给定拓扑中的顶点。在下例中，将创建 T 样条曲线曲面，然后通过“TSplineTopology.InnerVertices”返回内部顶点。
 
 ## 示例文件
 

doc/distrib/NodeHelpFiles/zh-TW/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## 深入資訊
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` 會傳回給定拓樸內的頂點。以下範例建立一個 T 雲形線曲面，然後使用 `TSplineTopology.InnerVertices` 傳回內部頂點。
 
 ## 範例檔案
 

doc/distrib/xml/cs-CZ/FFITarget.xml

@@ -4,72 +4,72 @@
     </assembly>
     <members>
         <member name="T:FFITarget.ClassFunctionality">
-            <summary>Tests for basic functional testing of FFI implementations</summary>
+            <summary>Testy pro základní funkční testování implementací FFI</summary>
         </member>
         <member name="T:FFITarget.ClassFunctionalityMirror">
-            <summary>A class that contains the same IntVal member as ClassFunctionality</summary>
+            <summary>Třída, která obsahuje stejný člen IntVal jako ClassFunctionality</summary>
         </member>
         <member name="T:FFITarget.CodeCompletionClass">
-            <summary>Tests for code completion in codeblock node</summary>
+            <summary>Testuje dokončování kódu v uzlu codeblock</summary>
         </member>
         <member name="T:FFITarget.InstanceableClass">
-            <summary>A test class that creates a pyramid using instancing.</summary>
+            <summary>Testovací třída, která vytvoří pyramidu pomocí vytváření instancí.</summary>
         </member>
         <member name="T:FFITarget.InstanceableLineClass">
-            <summary>A test class that creates a pyramid using instancing.</summary>
+            <summary>Testovací třída, která vytvoří pyramidu pomocí vytváření instancí.</summary>
         </member>
         <member name="T:FFITarget.InstanceableClass_NoInstanceData">
-            <summary>This class is instanceable, but it returns false for instanceInfoAvailable so it will use regular tessellation.</summary>
+            <summary>Tato třída podporuje vytváření instancí, ale vrátí hodnotu false pro instanceInfoAvailable, takže použije běžné mozaikování.</summary>
         </member>
         <member name="T:FFITarget.ElementIDLifecycleManager`1">
-            <summary>Class to handle the lifetime of elements from their IDs</summary>
+            <summary>Třída, která má zpracovat životnost prvků z jejich ID</summary>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.GetInstance">
-            <summary>Returns the LifecycleManager for the specific type
-            WARNING: This is only a singleton for a given TypeArg</summary>
+            <summary>Vrátí Správce životního cyklu pro konkrétní typ.
+            UPOZORNĚNÍ: Toto je pouze jedináček pro daný TypeArg</summary>
             <returns/>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.RegisterAsssociation(`0,System.Object)">
-            <summary>Register a new dependency between an element ID and a wrapper</summary>
+            <summary>Registrace nové závislosti mezi ID prvku a obálkou</summary>
             <param name="elementID"/>
             <param name="wrapper"/>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.UnRegisterAssociation(`0,System.Object)">
-            <summary>Remove an association between an element ID and</summary>
+            <summary>Odebrání asociace mezi ID prvku a</summary>
             <param name="elementID"/>
             <param name="wrapper"/>
-            <returns>The number of remaining associations</returns>
+            <returns>Počet zbývajících asociací</returns>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.GetRegisteredCount(`0)">
-            <summary>Returns the number of wrappers that are registered</summary>
+            <summary>Vrátí počet zaregistrovaných obálek</summary>
             <param name="id"/>
             <returns/>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.IsRevitDeleted(`0)">
-            <summary>Checks whether an element has been deleted in Revit</summary>
+            <summary>Zkontroluje, zda byl prvek odstraněn v aplikaci Revit</summary>
             <param name="id"/>
             <returns/>
         </member>
         <member name="M:FFITarget.ElementIDLifecycleManager`1.NotifyOfRevitDeletion(`0)">
-            <summary>Set deletion state of Revit element</summary>
-            <param name="id">The element that needs to be deleted&gt;</param>
+            <summary>Nastavit stav odstranění prvku aplikace Revit</summary>
+            <param name="id">Prvek, který je nutné odstranit&gt;</param>
         </member>
         <member name="M:FFITarget.IncrementerTracedClass.#ctor(System.Int32)">
-            <summary>Note that x is a dummy var here that is intended to force replicated dispatch
-            it's not actually used</summary>
+            <summary>Všimněte si, že x je zde fiktivní proměnná, která má vynutit replikované odeslání
+            ve skutečnosti se nepoužívá</summary>
             <param name="x"/>
         </member>
         <member name="M:FFITarget.IncrementerTracedClass.#ctor(System.Int32,System.Boolean)">
-            <summary>Note that x is a dummy var here that is intended to force replicated dispatch
-            it's not actually used</summary>
-            <param name="x">Dummy var used to force replicated dispatch</param>
-            <param name="failWithException">Fail dispatch with an exception rather than</param>
+            <summary>Všimněte si, že x je zde fiktivní proměnná, která má vynutit replikované odeslání
+            ve skutečnosti se nepoužívá</summary>
+            <param name="x">Fiktivní proměnná použitá k vynucení replikovaného odeslání</param>
+            <param name="failWithException">Selhání odeslání s výjimkou místo</param>
         </member>
         <member name="T:FFITarget.OverloadTarget">
-            <summary>Test target for overloaded methods</summary>
+            <summary>Testovací cíl přetížených metod</summary>
         </member>
         <member name="M:FFITarget.TestData.ReturnNestedDictionary">
-            <summary>Return nested dictionary.</summary>
+            <summary>Vrátí vnořený slovník.</summary>
             <returns name="col">column</returns>
             <returns name="dict">dictionary</returns>
             <returns name="num">number</returns>

doc/distrib/xml/cs-CZ/GeometryColor.xml

@@ -39,7 +39,7 @@
         </member>
         <member name="M:Modifiers.GeometryColor.ByMeshColors(Autodesk.DesignScript.Geometry.Mesh,DSCore.Color[],System.Boolean)">
             <summary>Zobrazí síť podle jedné barvy, barev na plochu, barev na vrchol nebo barev na vrchol plochy.</summary>
-            <param name="mesh">The Mesh on which to apply the colors</param>
+            <param name="mesh">Síť, na kterou se mají použít barvy</param>
             <param name="colors">Počet barev se musí rovnat 1 (jedna barva), počtu ploch (barva na plochu), počtu vrcholů (barva na vrchol) nebo počtu trojúhelníků vynásobenému třemi (barva na vrchol trojúhelníku)</param>
             <param name="smoothShading">Pokud je tato hodnota true, stínování bude vypadat vyhlazeně místo složeně, což je užitečné k vizualizaci vyhlazených souvislých povrchů</param>
             <returns>Objekt zobrazení.</returns>

doc/distrib/xml/cs-CZ/ProtoGeometry.xml

@@ -31,15 +31,15 @@
             <notranslation>true</notranslation>
         </member>
         <member name="M:Autodesk.DesignScript.Geometry.DebugTools.EnableAsmJournaling(System.Collections.IList,System.String)">
-            <summary>Enables ASM journaling</summary>
-            <param name="input">Any input value</param>
-            <param name="journalPath">optional path to specify location of ASM journals.</param>
-            <returns name="output">Returns the input value</returns>
+            <summary>Povolí ASM žurnálování</summary>
+            <param name="input">Libovolná vstupní hodnota</param>
+            <param name="journalPath">Volitelná cesta k určení umístění ASM žurnálů.</param>
+            <returns name="output">Vrací vstupní hodnotu</returns>
         </member>
         <member name="M:Autodesk.DesignScript.Geometry.DebugTools.DisableAsmJournaling(System.Collections.IList)">
-            <summary>Disables ASM journaling</summary>
-            <param name="input">Any input value</param>
-            <returns name="output">Returns the input value</returns>
+            <summary>Zakáže ASM žurnálování</summary>
+            <param name="input">Libovolná vstupní hodnota</param>
+            <returns name="output">Vrací vstupní hodnotu</returns>
         </member>
         <member name="T:Autodesk.DesignScript.Geometry.Core.EntityTags">
             <summary>Štítky umožňují přidat k entitě DesignScriptEntity libovolná metadata. Jde o funkci, která je zásadní