InfiniTimeOrg · JF002 · Sep 17, 2022 · Sep 17, 2022
diff --git a/.devcontainer/build.sh b/.devcontainer/build.sh
@@ -60,7 +60,6 @@ CmakeGenerate() {
 
   cmake -G "Unix Makefiles" \
     -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
-    -DUSE_OPENOCD=1 \
     -DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_VER" \
     -DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \
     "$SOURCES_DIR"

diff --git a/CMakeLists.txt b/CMakeLists.txt
@@ -24,28 +24,6 @@ if (NOT NRF5_SDK_PATH)
   message(FATAL_ERROR "The path to the NRF52 SDK must be specified on the command line (add -DNRF5_SDK_PATH=<path>")
 endif ()
 
-if(USE_JLINK)
-  if (NOT NRFJPROG)
-    message(FATAL_ERROR "the path to the tool nrfjprog must be specified on the command line (add -DNRFJPROG=<path>")
-  endif ()
-endif()
-
-if(USE_GDB_CLIENT)
-  if(NOT GDB_CLIENT_BIN_PATH)
-    set(GDB_CLIENT_BIN_PATH "arm-none-eabi-gdb")
-  endif()
-
-  if(NOT GDB_CLIENT_TARGET_REMOTE)
-    message(FATAL_ERROR "The GDB target must be specified (add -DGDB_CLIENT_TARGET_REMOTE=<target>")
-  endif()
-endif()
-
-if(USE_OPENOCD)
-  if(NOT OPENOCD_BIN_PATH)
-    set(OPENOCD_BIN_PATH "openocd")
-  endif()
-endif()
-
 if(DEFINED USE_DEBUG_PINS AND USE_DEBUG_PINS)
   add_definitions(-DUSE_DEBUG_PINS)
 endif()
@@ -81,17 +59,6 @@ message("    * Toolchain : " ${ARM_NONE_EABI_TOOLCHAIN_PATH})
 message("    * GitRef(S) : " ${PROJECT_GIT_COMMIT_HASH})
 message("    * NRF52 SDK : " ${NRF5_SDK_PATH})
 message("    * Target device : " ${TARGET_DEVICE})
-set(PROGRAMMER "???")
-if(USE_JLINK)
-  message("    * Programmer/debugger : JLINK")
-  message("    * NrfJprog : " ${NRFJPROG})
-elseif(USE_GDB_CLIENT)
-  message("    * Programmer/debugger : GDB Client")
-  message("    * GDB Client path : " ${GDB_CLIENT_BIN_PATH})
-  message("    * GDB Target : " ${GDB_CLIENT_TARGET_REMOTE})
-elseif(USE_OPENOCD)
-  message("    * Programmer/debugger : OpenOCD Client")
-endif()
 if(USE_DEBUG_PINS)
   message("    * Debug pins : Enabled")
 else()

diff --git a/cmake-nRF5x/CMake_nRF5x.cmake b/cmake-nRF5x/CMake_nRF5x.cmake
@@ -229,24 +229,6 @@ macro(nRF5x_setup)
       "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twi.c"
       )
 
-    # adds target for erasing
-    if(USE_JLINK)
-        add_custom_target(FLASH_ERASE
-                COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
-                COMMENT "erasing flashing"
-                )
-    elseif(USE_GDB_CLIENT)
-        add_custom_target(FLASH_ERASE
-          COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
-          COMMENT "erasing flashing"
-          )
-    elseif(USE_OPENOCD)
-        add_custom_target(FLASH_ERASE
-            COMMAND ${OPENOCD_BIN_PATH}  -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
-            COMMENT "erasing flashing"
-            )
-    endif()
-
     if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin")
         set(TERMINAL "open")
     elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows")
@@ -255,16 +237,6 @@ macro(nRF5x_setup)
         set(TERMINAL "gnome-terminal")
     endif()
 
-    if(USE_JLINK)
-        add_custom_target(START_JLINK
-                COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkGDBServer-${NRF_TARGET}"
-                COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkExe-${NRF_TARGET}"
-                COMMAND sleep 2s
-                COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkRTTClient"
-                COMMENT "started JLink commands"
-                )
-    endif()
-
 endmacro(nRF5x_setup)
 
 # adds a target for comiling and flashing an executable
@@ -282,29 +254,6 @@ macro(nRF5x_addExecutable EXECUTABLE_NAME SOURCE_FILES)
             COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_NAME}.out "${EXECUTABLE_NAME}.hex"
             COMMENT "post build steps for ${EXECUTABLE_NAME}")
 
-    # custom target for flashing the board
-    if(USE_JLINK)
-        add_custom_target("FLASH_${EXECUTABLE_NAME}"
-                DEPENDS ${EXECUTABLE_NAME}
-                COMMAND ${NRFJPROG} --program ${EXECUTABLE_NAME}.hex -f ${NRF_TARGET} --sectorerase
-                COMMAND sleep 0.5s
-                COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
-                COMMENT "flashing ${EXECUTABLE_NAME}.hex"
-                )
-    elseif(USE_GDB_CLIENT)
-        add_custom_target("FLASH_${EXECUTABLE_NAME}"
-          DEPENDS ${EXECUTABLE_NAME}
-          COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill'  ${EXECUTABLE_NAME}.hex
-          COMMENT "flashing ${EXECUTABLE_NAME}.hex"
-          )
-    elseif(USE_OPENOCD)
-        add_custom_target("FLASH_${EXECUTABLE_NAME}"
-                DEPENDS ${EXECUTABLE_NAME}
-                COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_NAME}.hex\""  -c reset -c shutdown
-                COMMENT "flashing ${EXECUTABLE_NAME}.hex"
-        )
-    endif()
-
 endmacro()
 
 # adds app-level scheduler library

diff --git a/doc/buildAndProgram.md b/doc/buildAndProgram.md
@@ -40,11 +40,7 @@ CMake configures the project according to variables you specify the command line
 ----------|-------------|--------|
 **ARM_NONE_EABI_TOOLCHAIN_PATH**|path to the toolchain directory|`-DARM_NONE_EABI_TOOLCHAIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-10.3-2021.10/`|
 **NRF5_SDK_PATH**|path to the NRF52 SDK|`-DNRF5_SDK_PATH=/home/jf/nrf52/Pinetime/sdk`|
-**USE_JLINK, USE_GDB_CLIENT and USE_OPENOCD**|Enable *JLink* mode, *GDB Client* (Black Magic Probe) mode or *OpenOCD* mode (set the one you want to use to `1`)|`-DUSE_JLINK=1`
 **CMAKE_BUILD_TYPE (\*)**| Build type (Release or Debug). Release is applied by default if this variable is not specified.|`-DCMAKE_BUILD_TYPE=Debug`
-**NRFJPROG**|Path to the NRFJProg executable. Used only if `USE_JLINK` is 1.|`-DNRFJPROG=/opt/nrfjprog/nrfjprog`
-**GDB_CLIENT_BIN_PATH**|Path to arm-none-eabi-gdb executable. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_BIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-9-2019-q4-major/bin/arm-none-eabi-gdb`
-**GDB_CLIENT_TARGET_REMOTE**|Target remote connection string. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_TARGET_REMOTE=/dev/ttyACM0`
 **BUILD_DFU (\*\*)**|Build DFU files while building (needs [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)).|`-DBUILD_DFU=1`
 **BUILD_RESOURCES (\*\*)**| Generate external resource while building (needs [lv_font_conv](https://github.com/lvgl/lv_font_conv) and [lv_img_conv](https://github.com/lvgl/lv_img_conv). |`-DBUILD_RESOURCES=1`
 **TARGET_DEVICE**|Target device, used for hardware configuration. Allowed: `PINETIME, MOY-TFK5, MOY-TIN5, MOY-TON5, MOY-UNK`|`-DTARGET_DEVICE=PINETIME` (Default)
@@ -57,30 +53,16 @@ The *Debug* mode disables all optimizations, which makes the code easier to debu
 #### (\*\*) Note about **BUILD_DFU**
 DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mechanism. To generate the DFU file, the Python tool [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil) is needed on your system. Check that this tool is properly installed before enabling this option.
 
-#### CMake command line for JLink
+#### CMake command 
 
 ```
-cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_JLINK=1 -DNRFJPROG=... ../
-```
-
-#### CMake command line for GDB Client (Black Magic Probe)
-
-```
-cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_GDB_CLIENT=1 -DGDB_CLIENT_BIN_PATH=... -DGDB_CLIENT_TARGET_REMOTE=... ../
-```
-
-#### CMake command line for OpenOCD
-
-```
-cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_OPENOCD=1 -DGDB_CLIENT_BIN_PATH=[optional] ../
+cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=...
 ```
 
 ### Build the project
 
 During the project generation, CMake created the following targets:
 
-- **FLASH_ERASE** : mass erase the flash memory of the NRF52.
-- **FLASH_pinetime-app** : flash the firmware into the NRF52.
 - **pinetime-app** : build the standalone (without bootloader support) version of the firmware.
 - **pinetime-recovery** : build the standalone recovery version of infinitime (light firmware that only supports OTA and basic UI)
 - **pinetime-recovery-loader** : build the standalone tool that flashes the recovery firmware into the external SPI flash
@@ -108,24 +90,6 @@ Binary files are generated into the folder `src`:
 
 The same files are generated for **pinetime-recovery** and **pinetime-recoveryloader**
 
-### Program and run
-
-#### Using CMake targets
-
-These target have been configured during the project generation by CMake according to the parameters you provided to the command line.
-
-Mass erase:
-
-```
-make FLASH_ERASE
-```
-
-Flash the application:
-
-```
-make FLASH_pinetime-app
-```
-
 ### How to generate files needed by the factory
 
 These files are needed by the Pine64 factory to flash InfiniTime as the default firmware on the PineTimes.

diff --git a/docker/build.sh b/docker/build.sh
@@ -63,7 +63,6 @@ CmakeGenerate() {
     -S "$SOURCES_DIR" \
     -B "$BUILD_DIR" \
     -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
-    -DUSE_OPENOCD=1 \
     -DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_PATH" \
     -DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \
     -DBUILD_DFU=1 \

diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
@@ -1139,68 +1139,3 @@ if(BUILD_RESOURCES)
   add_subdirectory(resources)
 endif()
 
-
-# FLASH
-if (USE_JLINK)
-  add_custom_target(FLASH_ERASE
-          COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
-          COMMENT "erasing flashing"
-          )
-  add_custom_target("FLASH_${EXECUTABLE_NAME}"
-          DEPENDS ${EXECUTABLE_NAME}
-          COMMAND ${NRFJPROG} --program ${EXECUTABLE_FILE_NAME}.hex -f ${NRF_TARGET} --sectorerase
-          COMMAND sleep 0.5s
-          COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
-          COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
-          )
-
-elseif (USE_GDB_CLIENT)
-  add_custom_target(FLASH_ERASE
-          COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
-          COMMENT "erasing flashing"
-          )
-  add_custom_target("FLASH_${EXECUTABLE_NAME}"
-          DEPENDS ${EXECUTABLE_NAME}
-          COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_FILE_NAME}.hex
-          COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
-          )
-elseif (USE_OPENOCD)
-  if (USE_CMSIS_DAP)
-    add_custom_target(FLASH_ERASE
-            COMMAND ${OPENOCD_BIN_PATH} -c 'source [find interface/cmsis-dap.cfg]' -c 'transport select swd'
-            -c 'source [find target/nrf52.cfg]'
-            -c 'init'
-            -c 'halt'
-            -c 'nrf5 mass_erase'
-            -c 'halt'
-            -c 'reset'
-            -c 'exit'
-            COMMENT "erasing flashing"
-            )
-    add_custom_target("FLASH_${EXECUTABLE_NAME}"
-            DEPENDS ${EXECUTABLE_NAME}
-            COMMAND ${OPENOCD_BIN_PATH}
-            -c 'tcl_port disabled'
-            -c 'gdb_port 3333'
-            -c 'telnet_port 4444'
-            -c 'source [find interface/cmsis-dap.cfg]'
-            -c 'transport select swd'
-            -c 'source [find target/nrf52.cfg]'
-            -c 'halt'
-            -c "program \"${EXECUTABLE_FILE_NAME}.hex\""
-            -c 'reset'
-            -c 'shutdown'
-            COMMENT "flashing ${EXECUTABLE_BIN_NAME}.hex"
-            )
-  else ()
-    add_custom_target(FLASH_ERASE
-            COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
-            COMMENT "erasing flashing"
-            )
-    add_custom_target("FLASH_${EXECUTABLE_NAME}"
-            DEPENDS ${EXECUTABLE_NAME}
-            COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_FILE_NAME}.hex\"" -c reset -c shutdown
-            COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
-            )
-  endif ()
-endif ()