build(deps): bump wandb from 0.17.4 to 0.19.4

[dependabot]

Bumps wandb from 0.17.4 to 0.19.4.

Release notes

Sourced from wandb's releases.

v0.19.4

What's Changed

Fixed

• Fix incorrectly reported device counts and duty cycle measurements for TPUs with single devices per chip / multiple devices on the host and make TPU metrics sampling more robust (@​dmitryduev in wandb/wandb#9266)
• Handle non-consecutive TPU device IDs in system monitor (@​dmitryduev in wandb/wandb#9276)

v0.19.3

What's Changed

Fixed

• Fix wandb.Settings update regression in wandb.integration.metaflow (@​kptkin in wandb/wandb#9211)

v0.19.2

What's Changed

Added

• Support JWT authentication in wandb-core (@​elainaRenee in wandb/wandb#8431)
• Add support for logging nested custom charts. (@​jacobromero in wandb/wandb#8789)

Changed

• Calling wandb.init(mode="disabled") no longer disables all later runs by default. Use wandb.setup(settings=wandb.Settings(mode="disabled")) for this instead, or set mode="disabled" explicitly in each call to wandb.init(). (@​timoffex in wandb/wandb#9172)

Fixed

• The stop button correctly interrupts runs whose main Python thread is running C code, sleeping, etc. (@​timoffex in wandb/wandb#9094)
• Remove unintentional print that occurs when inspecting wandb.Api().runs() (@​tomtseng in wandb/wandb#9101)
• Fix uploading large artifacts when using Azure Blob Storage. (@​amulya-musipatla in wandb/wandb#8946)
• The wandb offline command no longer adds an unsupported setting to wandb.Settings, resolving ValidationError. (@​kptkin in wandb/wandb#9135)
• Fix error when reinitializing a run, caused by accessing a removed attribute. (@​MathisTLD in wandb/wandb#8912)
• Fixed occasional deadlock when using multiprocessing to update a single run from multiple processes (@​timoffex in wandb/wandb#9126)
• Prevent errors from bugs in older versions of botocore < 1.5.76 (@​amusipatla-wandb, @​tonyyli-wandb in wandb/wandb#9015)
• Fixed various checks against invalid anonymous settings value. (@​jacobromero in wandb/wandb#9193)

Removed

• The wandb.wandb_sdk.wandb_setup._setup() function's reset parameter has been removed. Note that this is a private function, even though there appear to be usages outside of the repo. Please wandb.teardown() instead of _setup(reset=True). (@​timoffex in wandb/wandb#9165)
• In the private wandb.wandb_sdk.wandb_setup module, the logger and _set_logger symbols have been removed (@​timoffex in wandb/wandb#9195)

v0.19.1

What's Changed

Fixed

... (truncated)

Changelog

Sourced from wandb's changelog.

[0.19.4] - 2025-01-16

Fixed

• Fix incorrectly reported device counts and duty cycle measurements for TPUs with single devices per chip / multiple devices on the host and make TPU metrics sampling more robust (@​dmitryduev in wandb/wandb#9266)
• Handle non-consecutive TPU device IDs in system monitor (@​dmitryduev in wandb/wandb#9276)

[0.19.3] - 2025-01-13

Fixed

• Fix wandb.Settings update regression in wandb.integration.metaflow (@​kptkin in wandb/wandb#9211)

[0.19.2] - 2025-01-07

Added

• Support JWT authentication in wandb-core (@​elainaRenee in wandb/wandb#8431)
• Add support for logging nested custom charts. (@​jacobromero in wandb/wandb#8789)

Changed

• Calling wandb.init(mode="disabled") no longer disables all later runs by default. Use wandb.setup(settings=wandb.Settings(mode="disabled")) for this instead, or set mode="disabled" explicitly in each call to wandb.init(). (@​timoffex in wandb/wandb#9172)

Fixed

• The stop button correctly interrupts runs whose main Python thread is running C code, sleeping, etc. (@​timoffex in wandb/wandb#9094)
• Remove unintentional print that occurs when inspecting wandb.Api().runs() (@​tomtseng in wandb/wandb#9101)
• Fix uploading large artifacts when using Azure Blob Storage. (@​amulya-musipatla in wandb/wandb#8946)
• The wandb offline command no longer adds an unsupported setting to wandb.Settings, resolving ValidationError. (@​kptkin in wandb/wandb#9135)
• Fix error when reinitializing a run, caused by accessing a removed attribute. (@​MathisTLD in wandb/wandb#8912)
• Fixed occasional deadlock when using multiprocessing to update a single run from multiple processes (@​timoffex in wandb/wandb#9126)
• Prevent errors from bugs in older versions of botocore < 1.5.76 (@​amusipatla-wandb, @​tonyyli-wandb in wandb/wandb#9015)
• Fixed various checks against invalid anonymous settings value. (@​jacobromero in wandb/wandb#9193)

Removed

• The wandb.wandb_sdk.wandb_setup._setup() function's reset parameter has been removed. Note that this is a private function, even though there appear to be usages outside of the repo. Please wandb.teardown() instead of _setup(reset=True). (@​timoffex in wandb/wandb#9165)
• In the private wandb.wandb_sdk.wandb_setup module, the logger and _set_logger symbols have been removed (@​timoffex in wandb/wandb#9195)

Security

• Bump github.com/go-git/go-git version to 5.13.0 to address CVE-2025-21613. (@​kptkin in wandb/wandb#9192)
• Bump golang.org/x/net version to 0.33.0 to address CVE-2024-45338. (@​kptkin in wandb/wandb#9115)

[0.19.1] - 2024-12-13

Fixed

... (truncated)

Commits

• 38b83df Bump version and update CHANGELOG for release 0.19.4
• 1c044af chore: band-aid a test in test_step_upload.py (#9279)
• 0c9bb42 chore: bump github.com/Azure/azure-sdk-for-go/sdk/azidentity from 1.8.0 to 1....
• 264c5c3 chore: update release-sdk action to use upload/download-artifact v4 (#9280)
• 20ceebc refactor: fix type hint, Backend._settings cannot be None (#9269)
• 7d2bf64 chore: update release-sdk action to use upload/download-artifact@v4 (#9278)
• 32fe949 fix: handle non-consecutive TPU device IDs in system monitor (#9276)
• 4217f84 chore: make tools/inpect_tool.py stanalone/executable with uv (#9272)
• 3f05f83 refactor: require run in publish_summary, delete _hack_set_run (#9268)
• 23dbd43 refactor: require run in InterfaceBase.publish_partial_history (#9264)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)