Skip to content

Commit 70422e4

Browse files
tarTech23tarTech23
committed
draft done
1 parent ddffa37 commit 70422e4

File tree

1 file changed

+46
-42
lines changed

1 file changed

+46
-42
lines changed

‎articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-gen11.md

Lines changed: 46 additions & 42 deletions
Original file line numberDiff line numberDiff line change
@@ -24,64 +24,54 @@ The HPE ProLiant DL20 Gen11 is also available for the on-premises management con
2424
|----|----|
2525
|Chassis|1U rack server|
2626
|Physical Characteristics | HPE DL20 Gen11 4SFF Ht Plg CTO Server |
27-
|Processor| Intel Xeon E-2434 3.4GHz 4-core 55W FIO Processor for HPE |
27+
|Processor| Intel Xeon E-2434 3.4-GHz 4-core 55 W FIO Processor for HPE |
2828
|Chipset|Intel C262 |
2929
|Memory|2 x 16-GB Single Rank x8 DDR5-4800 CAS-40-39-39<br>Unbuffered Standard Memory Kit|
30-
|Storage|HPE 4 x 1.2 TB SAS 12G Mission Critical 10K SFF |
30+
|Storage|HPE 4 x 1.2-TB SAS 12G Mission Critical 10K SFF |
3131
|Network controller|On-board: 4 x 1 Gb|
32-
|External| 1 x Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE|
32+
|External| 1 x Broadcom BCM5719 Ethernet 1-Gb 4-port BASE-T Adapter for HPE|
3333
|On-board| iLO Port Card 1 Gb|
3434
|Management|HPE iLO Advanced|
3535
|Device access| Front: One USB 3.2 1 x USB iLO Service Port<br> Rear: Four USBs 3.2|
3636
|Internal| One USB 3.2|
37-
|Power|HPE 1000W Flex Slot Titanium Hot Plug Redundant |
37+
|Power|HPE 1,000 W Flex Slot Titanium Hot Plug Redundant |
3838
|Rack support|HPE 1U Short Friction Rail Kit |
3939

4040
## DL20 Gen11 (4SFF) - Bill of Materials
4141

4242
|Quantity|PN|Description|
4343
|----|---|----|
44-
|1| P65392-B21 | HPE ProLiant DL20 Genl 1 4SFF Hot Plug Configure-to-order Server|
45-
|1| P65392-B21 B19 | HPE DL20 Genl 14SFF Ht Plg CTO Server |
46-
|1| P65224-B21 | Intel Xcon E-2434 3.4GHz 4-core 55W FIO Processor for HPE|
44+
|1| P65392-B21 | HPE ProLiant DL20 Gen 11 4SFF Hot Plug Configure-to-order Server|
45+
|1| P65392-B21 B19 | HPE DL20 Gen11 4SFF Ht Plg CTO Server |
46+
|1| P65224-B21 | Intel Xcon E-2434 3.4-GHz 4-core 55 W FIO Processor for HPE|
4747
|2| P64336-B21 | HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800 CAS-40-39-39 Unbuffered Standard Memory Kit|
4848
|4| P28586-B21 | HPE 1.2 TB SAS 12 G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
4949
|1| P52753-B21 | HPE ProLiant DL320 Genll x 16 FHHL Riser Kit|
50-
|1| P51178-B21 | Broadcom BCM5719 Ethernet 1 Gb 4-port BASE-T Adapter for HPE |
51-
|1| P47789-B21 | HPE MRi-o Genl 1 x 16 Lanes without Cache OCP SPDM Storage Controller |
52-
|2| P03178-B21 | HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit|
50+
|1| P51178-B21 | Broadcom BCM5719 Ethernet 1-Gb 4-port BASE-T Adapter for HPE |
51+
|1| P47789-B21 | HPE MRi-o Gen11 x 16 Lanes without Cache OCP SPDM Storage Controller |
52+
|2| P03178-B21 | HPE 1,000 W Flex Slot Titanium Hot Plug Power Supply Kit|
5353
|1| BD505A | HPE iLO Advanced 1-server License with yr Support on iLO Licensed Features |
54-
|1| P65412-B21 | HPE ProLiant DL20 Genl 1 2LFF/4SFF OCP Cable Kit |
54+
|1| P65412-B21 | HPE ProLiant DL20 Gen11 2LFF/4SFF OCP Cable Kit |
5555
|1| P64576-B21 | HPE Easy Install Rail 12 Kit |
5656
|1| P65407-B21 | HPE ProLiant DL20 GenIILP iLO/M.2 Enablement Kit |
5757

58-
<!-- UP to here port expansion-->
59-
## Optional Storage Controllers
60-
61-
Multi-disk RAID arrays combine multiple physical drives into one logical drive for increased redundancy and performance. The optional modules below have been tested in our lab for compatibility and sustained performance:
62-
63-
|Quantity|PN|Description|
64-
|----|---|----|
65-
|1| 869079-B21 | HPE Smart Array E208i-a SR G10 LH Ctrlr (RAID10) |
66-
|1| P26325-B21 | Broadcom MegaRAID MR216i-a x16 Lanes without Cache NVMe/SAS 12G Controller (RAID5)<br><br>**Note**: This RAID controller occupies the PCIe expansion slot and does not allow expansion of networking port expansion |
67-
68-
## Optional port expansion
58+
## Port expansion
6959

7060
Optional modules for port expansion include:
7161

7262
|Location |Type|Specifications|
7363
|--------------|--------------|---------|
74-
| PCI Slot 1 (Low profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
64+
| PCI Slot 1 (Low profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25-Gb 2-port SFP28 Adapter for HPE |
7565
| PCI Slot 1 (Low profile) | DP F/O NIC |P28787-B21 - Intel X710-DA2 Ethernet 10-Gb 2-port SFP+ Adapter for HPE |
7666
| PCI Slot 2 (High profile) | Quad Port Ethernet NIC| P21106-B21 - Intel I350-T4 Ethernet 1-Gb 4-port BASE-T Adapter for HPE |
77-
| PCI Slot 2 (High profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25 Gb 2-port SFP28 Adapter for HPE |
67+
| PCI Slot 2 (High profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25-Gb 2-port SFP28 Adapter for HPE |
7868
| PCI Slot 2 (High profile) | DP F/O NIC |P28787-B21 - Intel X710-DA2 Ethernet 10-Gb 2-port SFP+ Adapter for HPE |
79-
| SFPs for Fiber Optic NICs|MultiMode, Short Range|455883-B21 - HPE BLc 10G SFP+ SR Transceiver|
80-
| SFPs for Fiber Optic NICs|SingleMode, Long Range | 455886-B21 - HPE BLc 10G SFP+ LR Transceiver|
69+
| SFPs for Fiber Optic NICs|MultiMode, Short Range|455883-B21 - HPE BLc 10G SFP+ SR Transceiver |
70+
| SFPs for Fiber Optic NICs|SingleMode, Long Range | 455886-B21 - HPE BLc 10G SFP+ LR Transceiver |
8171

82-
## HPE ProLiant DL20 Gen 11 installation
72+
## HPE ProLiant DL20 Gen 11 (4SFF) installation
8373

84-
This section describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10 Plus appliance.
74+
This section describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen11 (4SFF) appliance.
8575

8676
Installation includes:
8777

@@ -122,15 +112,11 @@ Use the following procedure to set up network options and update the default pas
122112

123113
1. Change the default password and select **F10: Save**.
124114

125-
### Setup the BIOS and RAID array
115+
### Configure the HPE BIOS
126116

127-
This procedure describes how to configure the BIOS configuration for an unconfigured sensor appliance.
128-
In the event that any of the steps below are missing in the BIOS, please make sure that the hardware matches the specifications above.
117+
This procedure describes how to update the HPE BIOS configuration for your OT deployment.
129118

130-
HPE BIOS iLO is a system management software designed to give administrators control of HPE hardware remotely. It allows administrators to monitor system performance, configure settings, and troubleshoot hardware issues from a web browser. It can also be used to update system BIOS and firmware. The BIOS can be setup locally or remotely. To setup the BIOS remotely from a management computer, you need to define the HPE IP address and the management computer's IP address on the same subnet.
131-
132-
133-
**To configure the HPE BIOS**:
119+
**To configure the HPE BIOS:**
134120

135121
1. Select **System Utilities** > **System Configuration** > **BIOS/Platform Configuration (RBSU)**.
136122

@@ -142,17 +128,35 @@ HPE BIOS iLO is a system management software designed to give administrators con
142128

143129
1. Select **Embedded RAID 1: HPE Smart Array E208i-a SR Gen 10** > **Array Configuration** > **Create Array**.
144130

145-
1. In the **Create Array** form, select all four disk options, and on the next page select **RAID10**.
131+
1. Select **Proceed to Next Form**.
146132

147-
> [!NOTE]
148-
> For **Data-at-Rest** encryption, see HPE guidance for activating RAID SR Secure Encryption or using Self-Encrypting-Drives (SED).
149-
>
133+
1. In the **Set RAID Level** form, set the level to **RAID 10**.
134+
135+
1. Select **Proceed to Next Form**.
136+
137+
1. In the **Logical Drive Label** form, enter **Logical Drive 1**.
138+
139+
1. Select **Submit Changes**.
140+
141+
1. In the **Submit** form, select **Back to Main Menu**.
142+
143+
1. Select **F10: Save** and then press **Esc** twice.
144+
145+
1. In the **System Utilities** window, select **One-Time Boot Menu**.
146+
147+
1. In the **One-Time Boot Menu** form, select **Legacy BIOS One-Time Boot Menu**.
148+
149+
1. The **Booting in Legacy** and **Boot Override** windows appear. Choose a boot override option; for example, to a CD-ROM, USB, HDD, or UEFI shell.
150+
151+
:::image type="content" source="../media/tutorial-install-components/boot-override-window-one-v2.png" alt-text="Screenshot that shows the first Boot Override window.":::
152+
153+
:::image type="content" source="../media/tutorial-install-components/boot-override-window-two-v2.png" alt-text="Screenshot that shows the second Boot Override window.":::
150154

151155
[!INCLUDE [install iLO remotely from virtual drive and change timeout settings](../includes/ilo-remote-install-hpe.md)]
152156

153-
### Install Defender for IoT software on the HPE ProLiant DL20 Gen11
157+
### Install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (4SFF)
154158

155-
This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10 Plus.
159+
This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (4SFF).
156160

157161
The installation process takes about 20 minutes. After the installation, the system is restarted several times.
158162

@@ -168,7 +172,7 @@ The installation process takes about 20 minutes. After the installation, the sys
168172

169173
## Next steps
170174

171-
Continue understanding system requirements for physical or virtual appliances. For more information, see [Which appliances do I need?](../ot-appliance-sizing.md).
175+
Continue learning about the system requirements for physical or virtual appliances. For more information, see [Which appliances do I need?](../ot-appliance-sizing.md).
172176

173177
Then, use any of the following procedures to continue:
174178

0 commit comments

Comments
 (0)