Polices to policies

exchange/exchange-ps/exchange/New-DlpCompliancePolicy.md

@@ -866,7 +866,7 @@ Accept wildcard characters: False
 ```
 
 ### -SharePointLocation
-The SharePointLocation parameter specifies the SharePoint sites to include in the DLP police. You identify the site by its URL value, or you can use the value All to include all sites.
+The SharePointLocation parameter specifies the SharePoint sites to include in the DLP policy. You identify the site by its URL value, or you can use the value All to include all sites.
 
 You can't add SharePoint sites to the policy until they have been indexed.
 
@@ -886,7 +886,7 @@ Accept wildcard characters: False
 ```
 
 ### -SharePointLocationException
-This parameter specifies the SharePoint sites to exclude when you use the value All for the SharePointLocation parameter. You identify the site by its URL value.
+The SharePointLocationException parameter specifies the SharePoint sites to exclude when you use the value All for the SharePointLocation parameter. You identify the site by its URL value.
 
 You can't add SharePoint sites to the policy until they have been indexed.
 

exchange/exchange-ps/exchange/New-OwaMailboxPolicy.md

@@ -32,7 +32,7 @@ New-OwaMailboxPolicy [-Name] <String>
 ## DESCRIPTION
 Use the Set-OwaMailboxPolicy cmdlet to configure the new policy.
 
-Changes to Outlook on the web mailbox polices may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (Stop-Service WAS -Force and Start-Service W3SVC).
+Changes to Outlook on the web mailbox policies may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (Stop-Service WAS -Force and Start-Service W3SVC).
 
 You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 

exchange/exchange-ps/exchange/New-SharingPolicy.md

@@ -16,7 +16,7 @@ This cmdlet is available in on-premises Exchange and in the cloud-based service.
 
 Use the New-SharingPolicy cmdlet to create a sharing policy to regulate how users inside your organization can share calendar and contact information with users outside the organization. Users can only share this information after federation has been configured in Exchange. After federation is configured, users can send sharing invitations that comply with a sharing policy to external recipients in other Exchange Server 2010 or later organizations that have federation enabled. A sharing policy needs to get assigned to a mailbox to be effective. If a mailbox doesn't have a specific sharing policy assigned, a default policy enforces the level of sharing permitted for this mailbox.
 
-Sharing policies provide user-established, people-to-people sharing of both calendar and contact information with different types of external users. Sharing polices allow users to share both their free/busy and contact information (including the Calendar and Contacts folders) with recipients in other external federated Exchange organizations. For recipients that aren't in an external federated organization or are in non-Exchange organizations, sharing policies allow people-to-people sharing of their calendar information with anonymous users through the use of Internet Calendar Publishing.
+Sharing policies provide user-established, people-to-people sharing of both calendar and contact information with different types of external users. Sharing policies allow users to share both their free/busy and contact information (including the Calendar and Contacts folders) with recipients in other external federated Exchange organizations. For recipients that aren't in an external federated organization or are in non-Exchange organizations, sharing policies allow people-to-people sharing of their calendar information with anonymous users through the use of Internet Calendar Publishing.
 
 For information about the parameter sets in the Syntax section below, see [Exchange cmdlet syntax](https://learn.microsoft.com/powershell/exchange/exchange-cmdlet-syntax).
 

exchange/exchange-ps/exchange/Remove-AuthenticationPolicy.md

@@ -46,7 +46,7 @@ This example removes the authentication policy named "Engineering Group".
 Remove-AuthenticationPolicy -Identity "LegacyExchangeTokens" -AllowLegacyExchangeTokens
 ```
 
-In Exchange Online, this example enables legacy Exchange tokens to be issued to Outlook add-ins. This switch applies to the entire organization. The Identity parameter is required, and its value must be set to "LegacyExchangeTokens". Specific authentication polices can't be applied.
+In Exchange Online, this example enables legacy Exchange tokens to be issued to Outlook add-ins. This switch applies to the entire organization. The Identity parameter is required, and its value must be set to "LegacyExchangeTokens". Specific authentication policies can't be applied.
 
 ## PARAMETERS
 
@@ -77,7 +77,7 @@ The AllowLegacyExchangeTokens switch enables legacy Exchange tokens to be issued
 
 Legacy Exchange tokens include Exchange user identity and callback tokens.
 
-This switch applies to the entire organization. The Identity parameter is required, and its value must be set to "LegacyExchangeTokens". Specific authentication polices can't be applied.
+This switch applies to the entire organization. The Identity parameter is required, and its value must be set to "LegacyExchangeTokens". Specific authentication policies can't be applied.
 
 **Important**:
 

exchange/exchange-ps/exchange/Remove-OwaMailboxPolicy.md

@@ -30,7 +30,7 @@ Remove-OwaMailboxPolicy [-Identity] <MailboxPolicyIdParameter>
 ```
 
 ## DESCRIPTION
-Changes to Outlook on the web mailbox polices may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (Stop-Service WAS -Force and Start-Service W3SVC).
+Changes to Outlook on the web mailbox policies may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (Stop-Service WAS -Force and Start-Service W3SVC).
 
 You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 

exchange/exchange-ps/exchange/Set-AuthenticationPolicy.md

@@ -82,7 +82,7 @@ In Exchange 2019, this example re-enables Basic authentication for Exchange Repo
 Set-AuthenticationPolicy -Identity "LegacyExchangeTokens" -BlockLegacyExchangeTokens
 ```
 
-In Exchange Online, this example blocks legacy Exchange tokens from being issued to Outlook add-ins. The switch applies to the entire organization, and the Identity parameter must be set to the value "LegacyExchangeTokens". Specific authentication polices can't be applied.
+In Exchange Online, this example blocks legacy Exchange tokens from being issued to Outlook add-ins. The switch applies to the entire organization, and the Identity parameter must be set to the value "LegacyExchangeTokens". Specific authentication policies can't be applied.
 
 ## PARAMETERS
 
@@ -365,7 +365,7 @@ The AllowLegacyExchangeTokens switch specifies to allow legacy Exchange tokens t
 
 Legacy Exchange tokens include Exchange user identity and callback tokens.
 
-The switch applies to the entire organization. The Identity parameter is required and must be set to the value "LegacyExchangeTokens". Specific authentication polices can't be applied.
+The switch applies to the entire organization. The Identity parameter is required and must be set to the value "LegacyExchangeTokens". Specific authentication policies can't be applied.
 
 **Important**:
 
@@ -561,7 +561,7 @@ The BlockLegacyExchangeTokens switch specifies to block legacy Exchange tokens b
 
 Legacy Exchange tokens include Exchange user identity and callback tokens.
 
-The switch applies to the entire organization. The Identity parameter is required and must be set to the value "LegacyExchangeTokens". Specific authentication polices can't be applied.
+The switch applies to the entire organization. The Identity parameter is required and must be set to the value "LegacyExchangeTokens". Specific authentication policies can't be applied.
 
 **Important**:
 

exchange/exchange-ps/exchange/Set-MailboxServer.md

@@ -1870,7 +1870,7 @@ This parameter is available only in Exchange Server 2010 or Exchange Server 2013
 
 The SharingPolicyWorkCycle parameter specifies the time span in which all mailboxes on the Mailbox server will be scanned by the Sharing Policy Assistant. The default value is 1 day.
 
-The Sharing Policy Assistant scans all mailboxes and enables or disables sharing polices according to the interval specified by the SharingPolicyWorkCycle.
+The Sharing Policy Assistant scans all mailboxes and enables or disables sharing policies according to the interval specified by the SharingPolicyWorkCycle.
 
 To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes and s = seconds.
 

exchange/exchange-ps/exchange/Set-OrganizationConfig.md

@@ -3389,7 +3389,7 @@ This parameter is available only in Exchange Server 2010.
 
 The PermanentlyDeleteDisabled parameter specifies whether to disable the PermanentlyDelete retention action for messaging records management (MRM). Valid values are:
 
-- $true The PermanentlyDelete retention action is disabled. This setting only prevents items from being permanently deleted. It doesn't modify existing polices, block the creation of policies with the PermanentlyDelete action or notify users that thePermanentlyDelete action won't actually take effect.
+- $true The PermanentlyDelete retention action is disabled. This setting only prevents items from being permanently deleted. It doesn't modify existing policies, block the creation of policies with the PermanentlyDelete action or notify users that thePermanentlyDelete action won't actually take effect.
 - $false The PermanentlyDelete retention action is enabled. This is the default value.
 
 A message that's permanently deleted can't be recovered by using the Recoverable Items folder. Additionally, permanently deleted messages aren't returned by a Discovery search, unless litigation hold or single item recovery is enabled for the mailbox.

exchange/exchange-ps/exchange/Set-OwaMailboxPolicy.md

@@ -162,7 +162,7 @@ Set-OwaMailboxPolicy [-Identity] <MailboxPolicyIdParameter>
 ## DESCRIPTION
 In on-premises Exchange, the default Outlook on the web mailbox policy is named Default. In Exchange Online, the default Outlook on the web mailbox policy is named OwaMailboxPolicy-Default.
 
-Changes to Outlook on the web mailbox polices may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (`Stop-Service WAS -Force` and `Start-Service W3SVC`).
+Changes to Outlook on the web mailbox policies may take up to 60 minutes to take effect. In on-premises Exchange, you can force an update by restarting IIS (`Stop-Service WAS -Force` and `Start-Service W3SVC`).
 
 You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 

exchange/exchange-ps/exchange/Set-ThrottlingPolicy.md

@@ -173,7 +173,7 @@ Set-ThrottlingPolicy [-Identity] <ThrottlingPolicyIdParameter>
 ## DESCRIPTION
 Throttling policy settings are stored in Active Directory.
 
-By default, there is one default user throttling policy named GlobalThrottlingPolicy with a throttling scope of Global. Exchange Setup creates this policy as part of the Client Access server role. You shouldn't replace, re-create, or remove the existing default throttling policy. However, you can edit any additional throttling policies with the scope of Organization or Regular if you want to change your user throttling settings. You can create polices with the scope of Organization or Regular using the New-ThrottlingPolicy cmdlet.
+By default, there is one default user throttling policy named GlobalThrottlingPolicy with a throttling scope of Global. Exchange Setup creates this policy as part of the Client Access server role. You shouldn't replace, re-create, or remove the existing default throttling policy. However, you can edit any additional throttling policies with the scope of Organization or Regular if you want to change your user throttling settings. You can create policies with the scope of Organization or Regular using the New-ThrottlingPolicy cmdlet.
 
 For more information about how to control the resources consumed by individual users, see [User workload management in Exchange Server](https://learn.microsoft.com/Exchange/server-health/workload-management).