MicrosoftDocs · aditisrivastava07 · Aug 8, 2025 · Aug 7, 2025 · Aug 7, 2025 · Aug 7, 2025
diff --git a/exchange/exchange-ps/ExchangePowerShell/Stop-MigrationUser.md b/exchange/exchange-ps/ExchangePowerShell/Stop-MigrationUser.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online
+applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 author: chrisda
 external help file: Microsoft.Exchange.ProvisioningAndMigration-Help.xml
 Locale: en-US
@@ -46,7 +46,7 @@ This example stops the migration of the user [email protected].
 
 ### -Identity
 
-> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Identity parameter specifies the email address of the user that's being migrated.
 
@@ -66,7 +66,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -87,7 +87,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 This parameter is available only in on-premises Exchange.
 
@@ -127,7 +127,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxDatabaseCopy.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxDatabaseCopy.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 author: chrisda
 external help file: Microsoft.Exchange.ServerStatus-Help.xml
 Locale: en-US
@@ -65,7 +65,7 @@ This example only suspends activation for the copy of the database DB3 hosted on
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Identity parameter specifies the name of the database copy being suspended.
 
@@ -83,7 +83,7 @@ Accept wildcard characters: False
 
 ### -ActivationOnly
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The ActivationOnly switch specifies whether to suspend only activation for the mailbox database copy. You don't need to specify a value with this switch.
 
@@ -101,7 +101,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -122,7 +122,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
 
@@ -140,7 +140,7 @@ Accept wildcard characters: False
 
 ### -EnableReplayLag
 
-> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 This parameter is reserved for internal Microsoft use.
 
@@ -158,7 +158,7 @@ Accept wildcard characters: False
 
 ### -SuspendComment
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The SuspendComment parameter specifies the reason that the database copy is being suspended. This parameter is limited to 512 characters.
 
@@ -176,7 +176,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxExportRequest.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxExportRequest.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 author: chrisda
 external help file: Microsoft.Exchange.ProvisioningAndMigration-Help.xml
 Locale: en-US
@@ -55,7 +55,7 @@ This example suspends all export requests that are in progress by using the Get-
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Identity parameter specifies the identity of the export request. By default, export requests are named `<alias>\MailboxExportX` (where X = 0-9). Use the following syntax: `Alias\Name`.
 
@@ -73,7 +73,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -94,7 +94,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
 
@@ -112,7 +112,7 @@ Accept wildcard characters: False
 
 ### -SuspendComment
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The SuspendComment parameter specifies a description about why the request was suspended. You can only use this parameter if you specify the Suspend parameter.
 
@@ -130,7 +130,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxImportRequest.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxImportRequest.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 author: chrisda
 external help file: Microsoft.Exchange.ProvisioningAndMigration-Help.xml
 Locale: en-US
@@ -57,7 +57,7 @@ This example suspends all import requests that are in progress by using the Get-
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Identity parameter specifies the identity of the import request. By default, import requests are named `<alias>\MailboxImportX` (where X = 0-9). If you created the request by using the Name parameter, use the following syntax: `Alias\Name`.
 
@@ -75,7 +75,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -96,7 +96,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 This parameter is available only in on-premises Exchange.
 
@@ -116,7 +116,7 @@ Accept wildcard characters: False
 
 ### -SuspendComment
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The SuspendComment parameter specifies a description about why the request was suspended. You can only use this parameter if you specify the Suspend parameter.
 
@@ -134,7 +134,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxRestoreRequest.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-MailboxRestoreRequest.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 author: chrisda
 external help file: Microsoft.Exchange.ProvisioningAndMigration-Help.xml
 Locale: en-US
@@ -53,7 +53,7 @@ This example suspends all restore requests that are in progress by using the Get
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Identity parameter specifies the identity of the restore request. The Identity parameter consists of the alias of the mailbox to be restored and the name that was specified when the restore request was created. The identity of the restore request uses the following syntax: `Alias\Name`.
 
@@ -73,7 +73,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -94,7 +94,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 This parameter is available only in on-premises Exchange.
 
@@ -114,7 +114,7 @@ Accept wildcard characters: False
 
 ### -SuspendComment
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The SuspendComment parameter specifies a description about why the request was suspended.
 
@@ -132,7 +132,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-Message.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-Message.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 author: chrisda
 external help file: Microsoft.Exchange.TransportMailflow-Help.xml
 Locale: en-US
@@ -63,7 +63,7 @@ This example prevents delivery of all messages for which the following condition
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\\Queue\\MessageInteger or Queue\\MessageInteger or MessageInteger, for example, Mailbox01\\contoso.com\\5 or 10. For details about message identity, see [Message identity](https://learn.microsoft.com/Exchange/mail-flow/queues/queues-and-messages-in-powershell#message-identity).
 
@@ -81,7 +81,7 @@ Accept wildcard characters: False
 
 ### -Filter
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Filter parameter specifies one or more messages by using OPATH filter syntax. The OPATH filter includes a message property name followed by a comparison operator and value (for example, `"FromAddress -like '*@contoso.com'"`). For details about filterable message properties and comparison operators, see [Properties of messages in queues](https://learn.microsoft.com/Exchange/mail-flow/queues/message-properties) and [Find queues and messages in queues in the Exchange Management Shell](https://learn.microsoft.com/Exchange/mail-flow/queues/queues-and-messages-in-powershell).
 
@@ -101,7 +101,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -122,7 +122,7 @@ Accept wildcard characters: False
 
 ### -Server
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The Server parameter specifies the Exchange server where you want to run this command. You can use any value that uniquely identifies the server. For example:
 
@@ -149,7 +149,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Suspend-MoveRequest.md b/exchange/exchange-ps/ExchangePowerShell/Suspend-MoveRequest.md
@@ -1,5 +1,5 @@
 ---
-applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 author: chrisda
 external help file: Microsoft.Exchange.ProvisioningAndMigration-Help.xml
 Locale: en-US
@@ -54,7 +54,7 @@ This example suspends all move requests that are in progress by using the Get-Mo
 
 ### -Identity
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Identity parameter specifies the identity of the mailbox or mail user. You can use one of the following values:
 
@@ -80,7 +80,7 @@ Accept wildcard characters: False
 
 ### -Confirm
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
 
@@ -101,7 +101,7 @@ Accept wildcard characters: False
 
 ### -DomainController
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 This parameter is available only in on-premises Exchange.
 
@@ -152,7 +152,7 @@ Accept wildcard characters: False
 
 ### -SuspendComment
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The SuspendComment parameter specifies a description as to why the request was suspended.
 
@@ -170,7 +170,7 @@ Accept wildcard characters: False
 
 ### -WhatIf
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
 The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.