[AutoPublish] main to live - 08/20 13:32 PDT | 08/21 02:02 IST

exchange/exchange-ps/ExchangePowerShell/New-MailboxExportRequest.md

@@ -634,10 +634,7 @@ Accept wildcard characters: False
 
 The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
 
-For more information about maximum message size values, see the following topics:
-
-- Exchange 2016: [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits)
-- Exchange Online: [Exchange Online Limits](https://learn.microsoft.com/office365/servicedescriptions/exchange-online-service-description/exchange-online-limits)
+For more information about maximum message size values, see [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits).
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.
 

exchange/exchange-ps/ExchangePowerShell/New-MailboxImportRequest.md

@@ -262,14 +262,16 @@ Accept wildcard characters: False
 
 ### -AcceptLargeDataLoss
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
 The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.
 
 In Exchange 2013 or later, you need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
 
 In Exchange 2010, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
 
+In Exchange Online, this switch has no dependency on the BadItemLimit or LargeItemLimit parameters, because those parameters aren't available.
+
 ```yaml
 Type: SwitchParameter
 Parameter Sets: (All)
@@ -328,14 +330,18 @@ Accept wildcard characters: False
 
 ### -BadItemLimit
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
+
+This parameter is available only in on-premises Exchange.
 
 The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.
 
 In Exchange 2010, if you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the import completes.
+
 ```yaml
 Type: Unlimited
 Parameter Sets: (All)
@@ -626,19 +632,20 @@ Accept wildcard characters: False
 
 ### -LargeItemLimit
 
-> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
+> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
+This parameter is available only in on-premises Exchange.
 
-For more information about maximum message size values, see the following topics:
+The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
 
-- Exchange 2016: [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits)
-- Exchange Online: [Exchange Online Limits](https://learn.microsoft.com/office365/servicedescriptions/exchange-online-service-description/exchange-online-limits)
+For more information about maximum message size values, see [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits).
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.
 
 If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the import completes.
+
 ```yaml
 Type: Unlimited
 Parameter Sets: (All)

exchange/exchange-ps/ExchangePowerShell/New-MailboxRestoreRequest.md

@@ -517,10 +517,12 @@ Accept wildcard characters: False
 
 The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.
 
-In Exchange 2013 or later or Exchange Online, you need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
+In Exchange 2013 or later, you need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
 
 In Exchange 2010, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
 
+In Exchange Online, this switch has no dependency on the BadItemLimit or LargeItemLimit parameters, because those parameters aren't available.
+
 ```yaml
 Type: SwitchParameter
 Parameter Sets: (All)
@@ -581,15 +583,17 @@ Accept wildcard characters: False
 
 ### -BadItemLimit
 
-> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
+> Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
+
+This parameter is available only in on-premises Exchange.
 
 The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.
 
 In Exchange 2010, if you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
-**Note**: This parameter is being deprecated in the cloud-based service. In the future, if you don't use this parameter, Skipped Item approval semantics are used instead.
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the import completes.
 
 ```yaml
 Type: Unlimited
@@ -894,20 +898,19 @@ Accept wildcard characters: False
 
 ### -LargeItemLimit
 
-> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
+> Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
+This parameter is available only in on-premises Exchange.
 
-For more information about maximum message size values, see the following topics:
+The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
 
-- Exchange 2016: [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits)
-- Exchange Online: [Exchange Online Limits](https://learn.microsoft.com/office365/servicedescriptions/exchange-online-service-description/exchange-online-limits)
+For more information about maximum message size values, see [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits).
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.
 
 If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
-**Note**: This parameter is being deprecated in the cloud-based service. In the future, if you don't use this parameter, Skipped Item approval semantics are used instead.
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the restore completes.
 
 ```yaml
 Type: Unlimited

exchange/exchange-ps/ExchangePowerShell/New-MigrationBatch.md

@@ -943,7 +943,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Online
 
-able only in the cloud-based service.
+This parameter is available only in the cloud-based service.
 
 {{ Fill AvoidMergeOverlap Description }}
 
@@ -969,7 +969,7 @@ The BadItemLimit parameter specifies the maximum number of bad items that are al
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the migration request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the migration request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the migration request again.
 
-**Note**: This parameter is deprecated in the cloud-based service. 
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the import completes.
 
 ```yaml
 Type: Unlimited
@@ -1341,14 +1341,11 @@ This parameter is available only in on-premises Exchange.
 
 The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the migration request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
 
-For more information about maximum message size values, see the following topics:
-
-- Exchange 2016: [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits)
-- Exchange Online: [Exchange Online Limits](https://learn.microsoft.com/office365/servicedescriptions/exchange-online-service-description/exchange-online-limits)
+For more information about maximum message size values, see [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits).
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the migration request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the migration request can proceed.
 
-**Note**: This parameter is deprecated in the cloud-based service.
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the migration completes.
 
 ```yaml
 Type: Unlimited

exchange/exchange-ps/ExchangePowerShell/New-MoveRequest.md

@@ -449,7 +449,9 @@ Accept wildcard characters: False
 
 The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.
 
-In Exchange 2010 or later, but not Exchange Online, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
+In Exchange 2010 or later, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
+
+In Exchange Online, this switch has no dependency on the BadItemLimit or LargeItemLimit parameters, because those parameters aren't available.
 
 ```yaml
 Type: SwitchParameter
@@ -553,13 +555,15 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
+This parameter is available only in on-premises Exchange.
+
 The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.
 
 In Exchange 2010, if you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
-**Note**: This parameter is deprecated in the cloud-based service. [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) is used instead. Admins must review the DataConsistencyScore and any skipped items after the restore completes.
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items after the restore completes.
 
 ```yaml
 Type: Unlimited
@@ -829,18 +833,17 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
+This parameter is available only in on-premises Exchange.
 
-For more information about maximum message size values, see the following topics:
+The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
 
-- Exchange Server: [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits)
-- Exchange Online: [Exchange Online Limits](https://learn.microsoft.com/office365/servicedescriptions/exchange-online-service-description/exchange-online-limits)
+For more information about maximum message size values, see [Message size limits in Exchange Server](https://learn.microsoft.com/Exchange/mail-flow/message-size-limits).
 
 Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.
 
 If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
 
-**Note**: This parameter is deprecated in the cloud-based service. [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs). Admins must review the DataConsistencyScore and any skipped items after the restore completes.
+**Note**: This parameter is deprecated from the cloud-based service. Admins must review the [Data Consistency Score](https://learn.microsoft.com/exchange/mailbox-migration/track-prevent-data-loss-dcs) and any skipped items before the move completes.
 
 ```yaml
 Type: Unlimited