V4.1.4

IMPORTANT: Breaking change! V4.x recommends a minimum of 7.1.2 of the OpenEVSE controller firmware, some features do not function with older EVSE controller firmware.

What's Changed

• Add RFID support and upgrade OCPP library (RFID hardware required) by @matth-x in #325
• Huzzah board button press note by @mikebaz in #365
• Fixed broken/hi-jacked url from openevse.org to openevse.com by @d3wy in #363
• Fix for WiFi portal page by @jeremypoulter in #375
• Platform IO ESP32 core 4.4 by @jeremypoulter in #207
• Adding back the ability to use disabled instead of sleep to stop charging by @jeremypoulter in #371
• GZip the static content by @jeremypoulter in #384
• Add default delay timmer and apply a random start delay to the timer to comply with UK regulations @jeremypoulter in #391

Full Changelog: 4.1.3...4.1.4

Updating Firmware

Firmware can be updated via the web interface. Be sure to select the correct firmware for your hardware and unzip before uploading .bin

• Huzzah ESP8266 - can only run V2.x firmware, see archive V2.x repository
• Huzzah ESP32 - can run V3.x and V4.x firmware - use openevse_huzzah32.bin
• OpenEVSE V1 - designed for V4.x firmware - currently shipping in 2021 use openevse_wifi_v1.bin
• Olimex ESP32 Gateway (Wired Ethernet) - can run V3.x and V4.x firmware - use esp32-gateway-e.bin - NOTE: Ethernet gateway does not support HTTP update, FW must be uploaded via micro usb and esptool, see docs.

After updating FW browser cache may need clearing to reload the web interface

---

If the web interface cannot be loaded, the firmware must be loaded via a USB to serial programmer, see instructions in Readme.md.