Update the project and Eliminate warnings

libraries/HAL_Drivers/drv_pdm.c

@@ -375,7 +375,7 @@ static rt_err_t mic_start(struct rt_audio_device *audio, int stream)
 
     return RT_EOK;
 }
-\
+
 static rt_err_t mic_stop(struct rt_audio_device *audio, int stream)
 {
     struct mic_device *mic_dev = (struct mic_device *)audio->parent.user_data;
@@ -400,6 +400,7 @@ static struct rt_audio_ops mic_ops =
     .transmit    = RT_NULL,
     .buffer_info = RT_NULL,
 };
+
 int rt_hw_pdm_init(void)
 {
     rt_uint8_t *rx_fifo;

libraries/components/mtb-device-support-pse8xxgp/pdl/drivers/third_party/COMPONENT_GFXSS/vsi/dcnano8000/viv_dc_options.h

@@ -51,7 +51,7 @@
  * please change to the appropriate value according to the env
  */
 #define MEM_BASE 0x00000000
-#define MEM_SIZE 0x00000000
+//#define MEM_SIZE 0x00000000
 
 #define ALLOC_RESERVED_MEM_IN_KERNEL 1
 

projects/Edgi-Talk_WIFI/Edgi_Talk_M55_WIFI/README.md

@@ -46,10 +46,18 @@ It allows users to quickly test Wi-Fi scanning, connection, and performance, ver
 * After power-on, the system initializes the Wi-Fi device.
 * Connect to a Wi-Fi network via serial terminal:
 
+```
+wifi scan
+```
+![alt text](figures/5.png)
 ```
 wifi join <SSID> <PASSWORD>
 ```
-
+![alt text](figures/6.png)
+```
+ping www.rt-thread.org
+```
+![alt text](figures/7.png)
 * After connection, perform throughput test with iperf.
 * A GUI tool (`jperf`) is provided under `packages/netutils-latest/tools`.
 

projects/Edgi-Talk_WIFI/Edgi_Talk_M55_WIFI/README_zh.md

@@ -40,15 +40,24 @@
 * 系统会自动初始化 WIFI设备。
 * 用户可在 **串口终端**使用以下命令连接WIFI：
 
+```
+wifi scan
+```
+![alt text](figures/5.png)
 ```
 wifi join 名称 密码
 ```
+![alt text](figures/6.png)
+```
+ping www.rt-thread.org
+```
+![alt text](figures/7.png)
 
 * 网络连接完成后，可使用 iperf 进行性能测试。
 * 在 packages\netutils-latest\tools 目录下提供了 jperf.rar 测速工具。
 * 将其解压后，双击其中的 .bat 文件，即可启动工具，界面如下图所示：
 
-![工具演示](image.png)
+![工具演示](figures/4.png)
 
 * 在开发板终端输入以下命令（其中 电脑的 IP 请替换为实际地址），即可开始测速：
 

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/README.md

@@ -1,5 +1,7 @@
 # XiaoZhi Example Project
 
+[**中文**](./README_zh.md) | **English**
+
 ## Introduction
 
 This example demonstrates the **basic functionality of XiaoZhi voice interaction device** on the **Edgi-Talk platform**, running **RT-Thread RTOS**.
@@ -16,6 +18,17 @@ It allows users to quickly test Wi-Fi connection, key wake-up, and voice interac
 
 ## Usage
 
+### WIFI Modification
+
+1. In `main.c` at line 36, locate the following code:
+
+```c
+while (rt_wlan_connect("TEST", "88888888"));
+```
+
+2. Replace "TEST" with your WiFi name and "88888888" with the password, then recompile and flash.
+3. For detailed WiFi usage, refer to: [**WIFI**](../../Edgi-Talk_WIFI/Edgi_Talk_M55_WIFI/README.md)
+
 ### Build and Download
 
 1. Open and compile the project.

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/README_zh.md

@@ -1,5 +1,7 @@
 # 小智示例工程
 
+**中文** | [**English**](./README.md)
+
 ## 简介
 
 本示例工程基于 **Edgi-Talk 平台**，演示 **小智语音交互设备的基本功能**，运行在 **RT-Thread 实时操作系统** 上。
@@ -15,7 +17,13 @@
   * 设备状态管理（待机、监听、休眠等）
 
 ## 使用方法
-
+### WIFI修改
+1. 在 `main.c` 36行中找到以下代码：
+```c
+while (rt_wlan_connect("TEST", "88888888"));
+```
+2. 将 "TEST" 改为你的 WiFi 名称，"88888888" 改为密码，重新编译并烧录。
+3. WIFI 详细使用参考 ：[**WIFI**](../../Edgi-Talk_WIFI/Edgi_Talk_M55_WIFI/README_zh.md)
 ### 编译与下载
 
 1. 打开工程并完成编译。
@@ -33,6 +41,7 @@
   * **Sleeping**：休眠状态
 * 按下顶部按键，可进入 **Listening** 状态进行语音交互。
 
+![alt text](figures/3.png)
 ## 注意事项
 * 第一次需要进入 [小智官网](https://xiaozhi.me/) 进行后台绑定
 ![alt text](figures/2.png)

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/main.c

@@ -72,7 +72,7 @@ int en_gpio(void)
     rt_pin_mode(LCD_BL_GPIO_NUM, PIN_MODE_OUTPUT);
     rt_pin_mode(LCD_DISP_GPIO_NUM, PIN_MODE_OUTPUT);
     rt_pin_mode(BL_PWM_DISP_CTRL, PIN_MODE_OUTPUT);
-    
+
     return 0;
 }
 INIT_BOARD_EXPORT(en_gpio);

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/xiaozhi/adc/adc.c

@@ -40,7 +40,6 @@ static void adc_check_entry(void* parameter)
 
     rt_adc_device_t adc_dev;
     rt_uint32_t value;
-    char tmp[64];
     static rt_uint32_t adc_buf[ADC_AVG_NUM] = {0};
     rt_uint32_t sum = 0;
     rt_uint8_t idx = 0;

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/xiaozhi/ui/xiaozhi_ui.c

@@ -177,7 +177,7 @@ void xiaozhi_ui_task(void *args)
     lv_style_set_text_font(&style, font);
 
     lv_style_init(&style24);
-    lv_font_t * font2 = lv_tiny_ttf_create_data(xiaozhi_font, xiaozhi_font_size, 24);
+    lv_font_t *font2 = lv_tiny_ttf_create_data(xiaozhi_font, xiaozhi_font_size, 24);
     lv_style_set_text_font(&style24, font2);
 
     if (xiaozhi_ui_obj_init() != RT_EOK) return;

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/xiaozhi/xiaozhi.c

@@ -22,6 +22,7 @@ static char mac_address_string[20] = {0};
 static char client_id_string[40] = {0};
 xiaozhi_ws_t g_xz_ws;
 enum DeviceState g_state;
+rt_event_t xiaozhi_button_event = RT_NULL;
 
 void voice_rx_init();
 extern void iot_invoke(const uint8_t *data, uint16_t len);
@@ -90,12 +91,12 @@ void xz_button_callback(void *arg)
 {
     if (CYBSP_BTN_PRESSED == Cy_GPIO_Read(CYBSP_USER_BTN_PORT, CYBSP_USER_BTN_PIN))
     {
-        rt_event_send(button_event, BUTTON_EVENT_PRESSED);
+        rt_event_send(xiaozhi_button_event, BUTTON_EVENT_PRESSED);
     }
 #ifndef ExBoard_Voice
     else
     {
-        rt_event_send(button_event, BUTTON_EVENT_RELEASED);
+        rt_event_send(xiaozhi_button_event, BUTTON_EVENT_RELEASED);
     }
 #endif
 }
@@ -105,7 +106,7 @@ void xz_button_thread_entry(void *param)
     rt_uint32_t evt;
     while (1)
     {
-        rt_event_recv(button_event,
+        rt_event_recv(xiaozhi_button_event,
                       BUTTON_EVENT_PRESSED | BUTTON_EVENT_RELEASED,
                       RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
                       RT_WAITING_FOREVER, &evt);
@@ -159,8 +160,8 @@ void xz_button_init(void)
     {
         rt_pin_mode(BUTTON_PIN, PIN_MODE_INPUT_PULLUP);
         rt_pin_write(BUTTON_PIN, PIN_HIGH);
-        button_event = rt_event_create("btn_evt", RT_IPC_FLAG_FIFO);
-        RT_ASSERT(button_event != RT_NULL);
+        xiaozhi_button_event = rt_event_create("btn_evt", RT_IPC_FLAG_FIFO);
+        RT_ASSERT(xiaozhi_button_event != RT_NULL);
 
         rt_thread_t tid = rt_thread_create("btn_thread",
                                            xz_button_thread_entry,
@@ -232,7 +233,7 @@ void xz_audio_send_using_websocket(uint8_t *data, int len)
 {
     if (g_xz_ws.is_connected)
     {
-        wsock_write(&g_xz_ws.clnt, data, len, OPCODE_BINARY);
+        wsock_write(&g_xz_ws.clnt, (const char *)data, len, OPCODE_BINARY);
     }
     else
     {
@@ -271,10 +272,10 @@ err_t my_wsapp_fn(int code, char *buf, size_t len)
         g_state = kDeviceStateUnknown;
         break;
     case WS_TEXT:
-        Message_handle(buf, len);
+        Message_handle((const uint8_t *)buf, len);
         break;
     case WS_DATA:
-        xz_audio_downlink(buf, len, NULL, 0);
+        xz_audio_downlink((uint8_t *)buf, len, NULL, 0);
         break;
     default:
         LOG_E("Unknown error\n");
@@ -411,7 +412,7 @@ char *my_json_string(cJSON *json, char *key)
 void Message_handle(const uint8_t *data, uint16_t len)
 {
 //    rt_kputs(data);
-    cJSON *root = cJSON_Parse(data);
+    cJSON *root = cJSON_Parse((const char *)data);
     if (!root)
     {
         LOG_E("Error before: [%s]\n", cJSON_GetErrorPtr());
@@ -499,6 +500,7 @@ void Message_handle(const uint8_t *data, uint16_t len)
         cJSON *payload = cJSON_GetObjectItem(root, "payload");
         if (payload && cJSON_IsObject(payload))
         {
+            extern void McpServer_ParseMessage(const char* message);
             McpServer_ParseMessage(cJSON_PrintUnformatted(payload));
         }
     }
@@ -622,12 +624,6 @@ int http_xiaozhi_data_parse_ws(char *json_data)
         return -1;
     }
 
-    cJSON *presult = cJSON_GetObjectItem(root, "mqtt");
-    char *endpoint = my_json_string(presult, "endpoint");
-    char *client_id = my_json_string(presult, "client_id");
-    char *username = my_json_string(presult, "username");
-    char *password = my_json_string(presult, "password");
-    char *publish_topic = my_json_string(presult, "publish_topic");
     xiaozhi_ws_connect();
     cJSON_Delete(root);
     return 0;
@@ -690,6 +686,7 @@ void xiaozhi_entry(void *p)
         if (my_ota_version)
         {
             http_xiaozhi_data_parse_ws(my_ota_version);
+            extern void iot_initialize(void);
             iot_initialize();
             rt_free(my_ota_version);
             break;
@@ -763,14 +760,13 @@ static void serial_thread_entry(void *parameter)
         result = rt_mq_recv(&rx_mq, &msg, sizeof(msg), RT_WAITING_FOREVER);
         if (result > 0)
         {
-
             rx_length = rt_device_read(msg.dev, 0, rx_buffer, msg.size);
             rx_buffer[rx_length] = '\0';
             rt_kprintf("%s", rx_buffer);
             if (rx_buffer[0] == 0x01)
             {
                 rt_device_write(serial, 0, cmd, (sizeof(cmd)));
-                rt_event_send(button_event, BUTTON_EVENT_PRESSED);
+                rt_event_send(xiaozhi_button_event, BUTTON_EVENT_PRESSED);
 
             }
         }
@@ -779,16 +775,14 @@ static void serial_thread_entry(void *parameter)
 
 void voice_rx_init()
 {
-    rt_err_t result = RT_EOK;
-
     serial = rt_device_find("uart1");
     if (serial == RT_NULL)
     {
         rt_kprintf("device %s not find", "uart1");
         return;
     }
 
-    result = rt_device_open(serial, RT_DEVICE_FLAG_INT_RX);
+    rt_device_open(serial, RT_DEVICE_FLAG_INT_RX);
     rt_device_set_rx_indicate(serial, uart_input);
 
     rt_mq_init(&rx_mq, "rx_mq",

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/xiaozhi/xiaozhi.h

@@ -94,7 +94,7 @@ typedef struct
 {
     uint32_t sample_rate;
     uint32_t frame_duration;
-    uint8_t session_id[12];
+    char session_id[12];
     wsock_state_t clnt;
     rt_sem_t sem;
     uint8_t is_connected;
@@ -132,7 +132,7 @@ typedef struct
     rt_device_t rt_audio_dev;
     rt_device_t rt_mic_dev;
 } xz_audio_t;
-static rt_event_t button_event = RT_NULL;
+extern rt_event_t xiaozhi_button_event;
 char *get_mac_address(void);
 char *get_client_id(void);
 void xz_button_callback(void *arg);

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/applications/xiaozhi/xiaozhi_audio.c

@@ -230,6 +230,10 @@ void xz_opus_thread_entry(void *p)
             opus_int32 res = opus_decode(thiz->decoder, (const uint8_t *)queue->data,
                                          queue->data_len, thiz->downlink_decode_out,
                                          XZ_SPK_FRAME_LEN / 2, 0);
+            if (res < 0)
+            {
+                LOG_E("Opus decode error: %d", res);
+            }
             rt_device_write(thiz->rt_audio_dev, 0, (char *)thiz->downlink_decode_out, XZ_SPK_FRAME_LEN);
 
             uint8_t need_decode_again = 0;

projects/Edgi-Talk_XiaoZhi/Edgi_Talk_M55_XiaoZhi/board/ports/lvgl/lv_draw_vg_lite.c

@@ -1,5 +1,4 @@
 /*******************************************************************************
-#include <packages/lvgl_9.2.0/src/draw/vg_lite/lv_draw_vg_lite.h>
 * File Name        : lv_draw_vg_lite.c
 *
 * Description      : This file provides implementation of LVGL's drawing operations
@@ -24,7 +23,7 @@
 #include "lv_vg_lite_grad.h"
 #include "lv_vg_lite_pending.h"
 #include "lv_vg_lite_stroke.h"
-
+#include "lv_draw_vg_lite.h"
 /*********************
 * Macros
 *********************/