clk: tegra: Implement Tegra210 EMC clock

The EMC clock needs to carefully coordinate with the EMC controller
programming to make sure external memory can be properly clocked. Do so
by hooking up the EMC clock with an EMC provider that will specify which
rates are supported by the EMC and provide a callback to use for setting
the clock rate at the EMC.

Based on work by Peter De Schrijver <[email protected]>.

Signed-off-by: Joseph Lo <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

Author: joseph-lo-nvtw

drivers/clk/tegra/Makefile

@@ -25,5 +25,6 @@ obj-$(CONFIG_TEGRA124_EMC)		+= clk-tegra124-emc.o
 obj-$(CONFIG_ARCH_TEGRA_132_SOC)	+= clk-tegra124.o
 obj-y					+= cvb.o
 obj-$(CONFIG_ARCH_TEGRA_210_SOC)	+= clk-tegra210.o
+obj-$(CONFIG_ARCH_TEGRA_210_SOC)	+= clk-tegra210-emc.o
 obj-$(CONFIG_CLK_TEGRA_BPMP)		+= clk-bpmp.o
 obj-y					+= clk-utils.o

drivers/clk/tegra/clk-tegra210-emc.c

@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/tegra.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define CLK_SOURCE_EMC 0x19c
+#define  CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29)
+#define  CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16)
+#define  CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0)
+
+#define CLK_SRC_PLLM 0
+#define CLK_SRC_PLLC 1
+#define CLK_SRC_PLLP 2
+#define CLK_SRC_CLK_M 3
+#define CLK_SRC_PLLM_UD 4
+#define CLK_SRC_PLLMB_UD 5
+#define CLK_SRC_PLLMB 6
+#define CLK_SRC_PLLP_UD 7
+
+struct tegra210_clk_emc {
+	struct clk_hw hw;
+	void __iomem *regs;
+
+	struct tegra210_clk_emc_provider *provider;
+
+	struct clk *parents[8];
+};
+
+static inline struct tegra210_clk_emc *
+to_tegra210_clk_emc(struct clk_hw *hw)
+{
+	return container_of(hw, struct tegra210_clk_emc, hw);
+}
+
+static const char *tegra210_clk_emc_parents[] = {
+	"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud",
+	"pll_mb", "pll_p_ud",
+};
+
+static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	u32 value;
+	u8 src;
+
+	value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
+	src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value);
+
+	return src;
+}
+
+static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	u32 value, div;
+
+	/*
+	 * CCF assumes that neither the parent nor its rate will change during
+	 * ->set_rate(), so the parent rate passed in here was cached from the
+	 * parent before the ->set_rate() call.
+	 *
+	 * This can lead to wrong results being reported for the EMC clock if
+	 * the parent and/or parent rate have changed as part of the EMC rate
+	 * change sequence. Fix this by overriding the parent clock with what
+	 * we know to be the correct value after the rate change.
+	 */
+	parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+
+	value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
+
+	div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value);
+	div += 2;
+
+	return DIV_ROUND_UP(parent_rate * 2, div);
+}
+
+static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct tegra210_clk_emc_provider *provider = emc->provider;
+	unsigned int i;
+
+	if (!provider || !provider->configs || provider->num_configs == 0)
+		return clk_hw_get_rate(hw);
+
+	for (i = 0; i < provider->num_configs; i++) {
+		if (provider->configs[i].rate >= rate)
+			return provider->configs[i].rate;
+	}
+
+	return provider->configs[i - 1].rate;
+}
+
+static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc,
+						u8 index)
+{
+	struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index);
+	const char *name = clk_hw_get_name(parent);
+
+	/* XXX implement cache? */
+
+	return __clk_lookup(name);
+}
+
+static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct tegra210_clk_emc_provider *provider = emc->provider;
+	struct tegra210_clk_emc_config *config;
+	struct device *dev = provider->dev;
+	struct clk_hw *old, *new, *parent;
+	u8 old_idx, new_idx, index;
+	struct clk *clk;
+	unsigned int i;
+	int err;
+
+	if (!provider || !provider->configs || provider->num_configs == 0)
+		return -EINVAL;
+
+	for (i = 0; i < provider->num_configs; i++) {
+		if (provider->configs[i].rate >= rate) {
+			config = &provider->configs[i];
+			break;
+		}
+	}
+
+	if (i == provider->num_configs)
+		config = &provider->configs[i - 1];
+
+	old_idx = tegra210_clk_emc_get_parent(hw);
+	new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
+
+	old = clk_hw_get_parent_by_index(hw, old_idx);
+	new = clk_hw_get_parent_by_index(hw, new_idx);
+
+	/* if the rate has changed... */
+	if (config->parent_rate != clk_hw_get_rate(old)) {
+		/* ... but the clock source remains the same ... */
+		if (new_idx == old_idx) {
+			/* ... switch to the alternative clock source. */
+			switch (new_idx) {
+			case CLK_SRC_PLLM:
+				new_idx = CLK_SRC_PLLMB;
+				break;
+
+			case CLK_SRC_PLLM_UD:
+				new_idx = CLK_SRC_PLLMB_UD;
+				break;
+
+			case CLK_SRC_PLLMB_UD:
+				new_idx = CLK_SRC_PLLM_UD;
+				break;
+
+			case CLK_SRC_PLLMB:
+				new_idx = CLK_SRC_PLLM;
+				break;
+			}
+
+			/*
+			 * This should never happen because we can't deal with
+			 * it.
+			 */
+			if (WARN_ON(new_idx == old_idx))
+				return -EINVAL;
+
+			new = clk_hw_get_parent_by_index(hw, new_idx);
+		}
+
+		index = new_idx;
+		parent = new;
+	} else {
+		index = old_idx;
+		parent = old;
+	}
+
+	clk = tegra210_clk_emc_find_parent(emc, index);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(dev, "failed to get parent clock for index %u: %d\n",
+			index, err);
+		return err;
+	}
+
+	/* set the new parent clock to the required rate */
+	if (clk_get_rate(clk) != config->parent_rate) {
+		err = clk_set_rate(clk, config->parent_rate);
+		if (err < 0) {
+			dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n",
+				config->parent_rate, clk, err);
+			return err;
+		}
+	}
+
+	/* enable the new parent clock */
+	if (parent != old) {
+		err = clk_prepare_enable(clk);
+		if (err < 0) {
+			dev_err(dev, "failed to enable parent clock %pC: %d\n",
+				clk, err);
+			return err;
+		}
+	}
+
+	/* update the EMC source configuration to reflect the new parent */
+	config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC;
+	config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index);
+
+	/*
+	 * Finally, switch the EMC programming with both old and new parent
+	 * clocks enabled.
+	 */
+	err = provider->set_rate(dev, config);
+	if (err < 0) {
+		dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate,
+			err);
+
+		/*
+		 * If we're unable to switch to the new EMC frequency, we no
+		 * longer need the new parent to be enabled.
+		 */
+		if (parent != old)
+			clk_disable_unprepare(clk);
+
+		return err;
+	}
+
+	/* reparent to new parent clock and disable the old parent clock */
+	if (parent != old) {
+		clk = tegra210_clk_emc_find_parent(emc, old_idx);
+		if (IS_ERR(clk)) {
+			err = PTR_ERR(clk);
+			dev_err(dev,
+				"failed to get parent clock for index %u: %d\n",
+				old_idx, err);
+			return err;
+		}
+
+		clk_hw_reparent(hw, parent);
+		clk_disable_unprepare(clk);
+	}
+
+	return err;
+}
+
+static const struct clk_ops tegra210_clk_emc_ops = {
+	.get_parent = tegra210_clk_emc_get_parent,
+	.recalc_rate = tegra210_clk_emc_recalc_rate,
+	.round_rate = tegra210_clk_emc_round_rate,
+	.set_rate = tegra210_clk_emc_set_rate,
+};
+
+struct clk *tegra210_clk_register_emc(struct device_node *np,
+				      void __iomem *regs)
+{
+	struct tegra210_clk_emc *emc;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	emc = kzalloc(sizeof(*emc), GFP_KERNEL);
+	if (!emc)
+		return ERR_PTR(-ENOMEM);
+
+	emc->regs = regs;
+
+	init.name = "emc";
+	init.ops = &tegra210_clk_emc_ops;
+	init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE;
+	init.parent_names = tegra210_clk_emc_parents;
+	init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents);
+	emc->hw.init = &init;
+
+	clk = clk_register(NULL, &emc->hw);
+	if (IS_ERR(clk)) {
+		kfree(emc);
+		return clk;
+	}
+
+	return clk;
+}
+
+int tegra210_clk_emc_attach(struct clk *clk,
+			    struct tegra210_clk_emc_provider *provider)
+{
+	struct clk_hw *hw = __clk_get_hw(clk);
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct device *dev = provider->dev;
+	unsigned int i;
+	int err;
+
+	if (!try_module_get(provider->owner))
+		return -ENODEV;
+
+	for (i = 0; i < provider->num_configs; i++) {
+		struct tegra210_clk_emc_config *config = &provider->configs[i];
+		struct clk_hw *parent;
+		bool same_freq;
+		u8 div, src;
+
+		div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value);
+		src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
+
+		/* do basic sanity checking on the EMC timings */
+		if (div & 0x1) {
+			dev_err(dev, "invalid odd divider %u for rate %lu Hz\n",
+				div, config->rate);
+			err = -EINVAL;
+			goto put;
+		}
+
+		same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ;
+
+		if (same_freq != config->same_freq) {
+			dev_err(dev,
+				"ambiguous EMC to MC ratio for rate %lu Hz\n",
+				config->rate);
+			err = -EINVAL;
+			goto put;
+		}
+
+		parent = clk_hw_get_parent_by_index(hw, src);
+		config->parent = src;
+
+		if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) {
+			config->parent_rate = config->rate * (1 + div / 2);
+		} else {
+			unsigned long rate = config->rate * (1 + div / 2);
+
+			config->parent_rate = clk_hw_get_rate(parent);
+
+			if (config->parent_rate != rate) {
+				dev_err(dev,
+					"rate %lu Hz does not match input\n",
+					config->rate);
+				err = -EINVAL;
+				goto put;
+			}
+		}
+	}
+
+	emc->provider = provider;
+
+	return 0;
+
+put:
+	module_put(provider->owner);
+	return err;
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach);
+
+void tegra210_clk_emc_detach(struct clk *clk)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk));
+
+	module_put(emc->provider->owner);
+	emc->provider = NULL;
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach);

drivers/clk/tegra/clk.h

@@ -907,4 +907,7 @@ void tegra_clk_periph_resume(void);
 bool tegra20_clk_emc_driver_available(struct clk_hw *emc_hw);
 struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter);
 
+struct clk *tegra210_clk_register_emc(struct device_node *np,
+				      void __iomem *regs);
+
 #endif /* TEGRA_CLK_H */