Merge series "spi: dw: Add generic DW DMA controller support" from Serge Semin <[email protected]>:

Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
APB SSI devices embedded into the SoC. Currently the DMA-based transfers
are supported by the DW APB SPI driver only as a middle layer code for
Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
platform DMAC device we introduced a set of patches to fix it within this
series.

First of all we need to add the Tx and Rx DMA channels support into the DW
APB SSI binding. Then there are several fixes and cleanups provided as a
initial preparation for the Generic DMA support integration: add Tx/Rx
finish wait methods, clear DMAC register when done or stopped, Fix native
CS being unset, enable interrupts in accordance with DMA xfer mode,
discard static DW DMA slave structures, discard unused void priv pointer
and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
length parametrisation and make sure it's optionally set in accordance
with the DMA max-burst capability.

In order to have the DW APB SSI MMIO driver working with DMA we need to
initialize the paddr field with the physical base address of the DW APB SSI
registers space. Then we unpin the Intel MID specific code from the
generic DMA one and placed it into the spi-dw-pci.c driver, which is a
better place for it anyway. After that the naming cleanups are performed
since the code is going to be used for a generic DMAC device. Finally the
Generic DMA initialization can be added to the generic version of the
DW APB SSI IP.

Last but not least we traditionally convert the legacy plain text-based
dt-binding file with yaml-based one and as a cherry on a cake replace
the manually written DebugFS registers read method with a ready-to-use
for the same purpose regset32 DebugFS interface usage.

This patchset is rebased and tested on the spi/for-next (5.7-rc5):
base-commit: fe9fce6 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")

Co-developed-by: Georgy Vlasov <[email protected]>
Signed-off-by: Georgy Vlasov <[email protected]>
Co-developed-by: Ramil Zaripov <[email protected]>
Signed-off-by: Ramil Zaripov <[email protected]>
Signed-off-by: Serge Semin <[email protected]>
Cc: Alexey Malahov <[email protected]>
Cc: Maxim Kaurkin <[email protected]>
Cc: Pavel Parkhomenko <[email protected]>
Cc: Ekaterina Skachko <[email protected]>
Cc: Vadim Vlasov <[email protected]>
Cc: Alexey Kolotnikov <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Allison Randal <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Gareth Williams <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---

Changelog v2:
- Rebase on top of the spi repository for-next branch.
- Move bindings conversion patch to the tail of the series.
- Move fixes to the head of the series.
- Apply as many changes as possible to be applied the Generic DMA
  functionality support is added and the spi-dw-mid is moved to the
  spi-dw-dma driver.
- Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
  since the problem has already been fixed.
- Add new patch "spi: dw: Discard unused void priv pointer".
- Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
  n_bytes member of the DW SPI data can be used instead.
- Build the DMA functionality into the DW APB SSI core if required instead
  of creating a separate kernel module.
- Use conditional statement instead of the ternary operator in the ref
  clock getter.

Serge Semin (19):
  dt-bindings: spi: dw: Add Tx/Rx DMA properties
  spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  spi: dw: Clear DMAC register when done or stopped
  spi: dw: Fix native CS being unset
  spi: dw: Enable interrupts in accordance with DMA xfer mode
  spi: dw: Discard static DW DMA slave structures
  spi: dw: Discard unused void priv pointer
  spi: dw: Discard dma_width member of the dw_spi structure
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Initialize paddr in DW SPI MMIO private data
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Use regset32 DebugFS method to create regdump file
  dt-bindings: spi: Convert DW SPI binding to DT schema

 .../bindings/spi/snps,dw-apb-ssi.txt          |  42 ---
 .../bindings/spi/snps,dw-apb-ssi.yaml         | 127 +++++++++
 .../devicetree/bindings/spi/spi-dw.txt        |  24 --
 drivers/spi/Kconfig                           |  15 +-
 drivers/spi/Makefile                          |   7 +-
 drivers/spi/{spi-dw-mid.c => spi-dw-dma.c}    | 257 ++++++++++--------
 drivers/spi/spi-dw-mmio.c                     |   9 +-
 drivers/spi/spi-dw-pci.c                      |  50 +++-
 drivers/spi/spi-dw.c                          |  98 +++----
 drivers/spi/spi-dw.h                          |  33 ++-
 10 files changed, 405 insertions(+), 257 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
 rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (53%)

--
2.25.1

Author: broonie

drivers/spi/spi-dw-mid.c

@@ -106,6 +106,8 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 		dmaengine_terminate_sync(dws->rxchan);
 		dma_release_channel(dws->rxchan);
 	}
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 }
 
 static irqreturn_t dma_transfer(struct dw_spi *dws)
@@ -152,6 +154,8 @@ static void dw_spi_dma_tx_done(void *arg)
 	clear_bit(TX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(RX_BUSY, &dws->dma_chan_busy))
 		return;
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 	spi_finalize_current_transfer(dws->master);
 }
 
@@ -199,6 +203,8 @@ static void dw_spi_dma_rx_done(void *arg)
 	clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(TX_BUSY, &dws->dma_chan_busy))
 		return;
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 	spi_finalize_current_transfer(dws->master);
 }
 
@@ -292,6 +298,8 @@ static void mid_spi_dma_stop(struct dw_spi *dws)
 		dmaengine_terminate_sync(dws->rxchan);
 		clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	}
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 }
 
 static const struct dw_spi_dma_ops mfld_dma_ops = {

drivers/spi/spi-dw-mmio.c

@@ -184,6 +184,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	int (*init_func)(struct platform_device *pdev,
 			 struct dw_spi_mmio *dwsmmio);
 	struct dw_spi_mmio *dwsmmio;
+	struct resource *mem;
 	struct dw_spi *dws;
 	int ret;
 	int num_cs;
@@ -196,10 +197,12 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	dws = &dwsmmio->dws;
 
 	/* Get basic io resource and map it */
-	dws->regs = devm_platform_ioremap_resource(pdev, 0);
+	dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
 	if (IS_ERR(dws->regs))
 		return PTR_ERR(dws->regs);
 
+	dws->paddr = mem->start;
+
 	dws->irq = platform_get_irq(pdev, 0);
 	if (dws->irq < 0)
 		return dws->irq; /* -ENXIO */

drivers/spi/spi-dw.c

@@ -124,8 +124,16 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
 void dw_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
+	bool cs_high = !!(spi->mode & SPI_CS_HIGH);
 
-	if (!enable)
+	/*
+	 * DW SPI controller demands any native CS being set in order to
+	 * proceed with data transfer. So in order to activate the SPI
+	 * communications we must set a corresponding bit in the Slave
+	 * Enable register no matter whether the SPI core is configured to
+	 * support active-high or active-low CS level.
+	 */
+	if (cs_high == enable)
 		dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
 	else if (dws->cs_override)
 		dw_writel(dws, DW_SPI_SER, 0);