Merge pull request #4226 from jiaojiaojiaojiaojiaoJJJII/dev

Add:T1000-E Meshcore Button, Solar Node Current

Author: nfs0619

sites/en/docs/Network/Meshtastic_Network/Solar_Node/Other Application/get_started_with_meshcore_solar_node.md

@@ -425,5 +425,11 @@ When you have completed the above steps, then you can [flash the application fir
 
       To achieve the best signal effect, please use the device in an open, unobstructed area with minimal interference for use.
 
+### Charging Current
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/solar_node_diagram.png" alt="pir" width={800} height="auto" /></p>
+
+The Xiao nRF-52840 Plus maximum charging current is 200 mA. The charging management chip CN3165 is 0.99A. So the maximum charging current is 1A.
+
 ## Resource
 - [Solar Node Battery Life Calculation Table](https://files.seeedstudio.com/products/SenseCAP/Wio-Tracker/Solar%20Node%20Consumption%20Test%20and%20Battery%20Life%20Calculation.xlsx)

sites/en/docs/Network/Meshtastic_Network/Solar_Node/get_started_with_solar_node.md

@@ -9,7 +9,7 @@ slug: /get_started_with_meshtastic_solar_node
 sku: 114993633,114993643
 sidebar_position: 2
 last_update:
-  date: 12/24/2025
+  date: 3/10/2026
   author: Michelle Huang
 createdAt: '2025-05-13'
 updatedAt: '2026-03-03'
@@ -515,5 +515,11 @@ The figures below are for reference only; actual consumption may vary based on r
 
       To achieve the best signal effect, please use the device in an open, unobstructed area with minimal interference for use.
 
+### Charging Current
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/solar_node_diagram.png" alt="pir" width={800} height="auto" /></p>
+
+The Xiao nRF-52840 Plus maximum charging current is 200 mA. The charging management chip CN3165 is 0.99A. So the maximum charging current is 1A.
+
 ## Resource
 - [Solar Node Battery Life Calculation Table](https://files.seeedstudio.com/products/SenseCAP/Wio-Tracker/Solar%20Node%20Consumption%20Test%20and%20Battery%20Life%20Calculation.xlsx)

sites/en/docs/Network/Meshtastic_Network/Solar_Node/solar_node.md

@@ -8,7 +8,7 @@ image: https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/solar-node.webp
 slug: /meshtastic_solar_node
 sidebar_position: 1
 last_update:
-  date: 12/16/2025
+  date: 3/10/2026
   author: Michelle Huang
 createdAt: '2025-04-08'
 updatedAt: '2026-03-03'
@@ -49,12 +49,16 @@ The Solar Node is available in two variants: [SenseCAP Solar Node P1](https://ww
 
 <table>
   <tr>
-    <th><b>Main controller</b></th>
+    <td><b>Main Controller</b></td>
     <th>
       <a href="https://www.seeedstudio.com/Seeed-Studio-XIAO-nRF52840-Plus-p-6359.html" target="_blank">XIAO nRF52840 Plus</a><br />
       (Nordic nRF52840, ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash)
     </th>
   </tr>
+  <tr>
+    <td><b>Charging Management Chip</b></td>
+    <td>CN3165 (0.99A)</td>
+  </tr>
   <tr>
     <td><b>LoRa Module</b></td>
     <td>

sites/en/docs/Network/Meshtastic_Network/T1000-E/Other Application/sensecap_t1000_e_meshcore.md

@@ -8,7 +8,7 @@ slug: /sensecap_t1000_e_meshcore
 sku: 114993369
 sidebar_position: 3
 last_update:
-  date: 3/4/2026
+  date: 3/10/2026
   author: Michelle Huang
 createdAt: '2026-02-28'
 updatedAt: '2026-03-03'
@@ -135,7 +135,11 @@ The disk will disappear after the firmware is successfully flashed. At this poin
 
 ### Power on the device
 
-Press the button to turn it on. The LED will be on and there is a rising melody.
+Press the button to turn it on. The LED will be on and there is a descending melody melody.
+
+### Power off the device
+
+Press the button for 3s to turn it off. The LED will be off and there is a dec melody.
 
 :::tip
 If the device doesn't respond when you press the button, please charge it first. Do not use the fast-charging charger.