Seeed-Studio · limengdu · Mar 2, 2026 · Mar 2, 2026 · Mar 2, 2026
diff --git a/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md b/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md
@@ -23,13 +23,13 @@ last_update:
 
 ## Introduction
 
-reTerminal E1004 is a 13.3 inch open-source full color ePaper display with up to 3-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home Assistant, Arduino and ESP-IDF for further development. With the E Ink® Spectra™ 6 full-color ePaper Display, it's perfect for digital frame, colorful dashboard visulization.
+reTerminal E1004 is a 13.3 inch open-source full color ePaper display with up to 6-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home Assistant, Arduino and ESP-IDF for further development. With the E Ink® Spectra™ 6 full-color ePaper Display, it's perfect for digital frame, colorful dashboard visulization.
 
 ### Features
 
 - **High-Definition Color Display:** 13.3-inch E Ink® Spectra™ 6 Full Color ePaper Display with a high resolution of 1200x1600 pixels.
 - **Powerful Processing:** Powered by ESP32-S3 with 8MB PSRAM and 32MB Flash for robust performance.
-- **Ultra-Low Power Consumption:** Built-in 5000mAh battery supports up to 3 months of usage on a single charge (Deep sleep mode).
+- **Ultra-Low Power Consumption:** Built-in 5000mAh battery supports up to 6 months of usage on a single charge (refresh every 6 hours).
 - **No-Code UI Development:** Default firmware supports SenseCraft HMI for drag-and-drop dashboard creation and AI-assisted design.
 - **Wide Compatibility:** Supports Home Assistant (ESPHome), Arduino, PlatformIO, and ESP-IDF.
 - **Rich Connectivity:** Integrated 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.0.

diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md
@@ -9,6 +9,7 @@ keywords:
   - SenseCraft HMI
 image: https://files.seeedstudio.com/wiki/Epaper/EE02/ee02head.webp
 slug: /getting_started_with_ee02
+sku: 100067144
 last_update:
   date: 2025-12-20
   author: Allen

diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/EE03_GettingStart.md b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/EE03_GettingStart.md
@@ -0,0 +1,211 @@
+---
+description: Getting Started with EE03 10.3-inch E-ink Driver Board
+title: Getting Started with XIAO ePaper Display Board - EE03
+keywords:
+  - E-ink
+  - Driver Board
+  - 10.3 inch
+  - ESP32
+  - SenseCraft HMI
+image: https://files.seeedstudio.com/wiki/Epaper/EE03/3-XIAO-ePaper-Display-Board-EE03-kit.jpg
+slug: /getting_started_with_ee03
+sku: 100080566
+last_update:
+  date: 2026-03-1
+  author: Jackson.Li
+---
+
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+import Steppers from '@site/src/components/utils/Stepper';
+
+## Introduction
+
+Powered by **XIAO ESP32-S3 Plus**, the ePaper driver board EE03 supports **10.3 Monochrome ePaper Display**. It features a JST 2.0 mm battery connector with power switch, built-in charging IC, and comes with one reset and three user buttons. Well-suited for low-power ePaper projects such as digital photo frames and information boards.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/1.jpg" style={{width:800, height:'auto'}}/></div>
+
+### Features
+
+- **Built in XIAO ESP32-S3 Plus:** Works immediately when connected to a compatible ePaper display.
+- **Dedicated 10.3" Monochrome ePaper Display Support:** Specifically designed for 10.3" high-speed refresh epaper display, ensuring quick setup and stable operation.
+- **High-Speed Refresh Enabled:** Integrated T-CON timing control ensures precise high-speed driving, while the onboard SHT40 provides real-time temperature sensing for waveform compensation.
+- **BAT Connector with Switch:** Provides simple battery connection and integrates a switch, enabling efficient power management and energy savings.
+- **User-Friendly Buttons:** Features 1 reset button and 3 user-programmable buttons, providing flexibility for project acceleration and customizable functions.
+- **SenseCraft HMI Firmware Pre-Flashed:** Simply plug in and start right away with SenseCraft HMI, our AI-powered no-code UI design platform. Choose from rich templates or drag-and-drop UI building (with optional AI assistance), and deploy to the ePaper display in just a few clicks.
+
+### Specification
+
+| Parameter | Description |
+| :--- | :--- |
+| **Processor** | XIAO ESP32-S3 Plus |
+| **ePaper Connector** | FPC 40 Pin 0.5mm |
+| **Battery Connector** | JST 2.0mm |
+| **Switch** | Battery Power ON/OFF |
+| **Power Supply** | - 3.7V Li-Battery<br/>- USB Type-C |
+| **Button** | - 1x Reset button<br/>- 3x User button |
+
+### Application
+
+- **Digital E-Book Readers:** Deliver a paper-like monochrome reading experience with 16-level grayscale and fast refresh for smoother page turns and more responsive updates.
+- **Real-Time Dashboard:** Display live information such as weather updates, calendar schedules, key notifications, and data widgets like energy usage, sensor status, or KPIs.
+- **Security Alerts:** Display alerts and notifications about security events, such as motion detection or door/window sensor activation.
+- **Public Transit Arrival Board:** Show real-time bus/train arrival times, route status, and service alerts at a glance for daily commuting.
+
+## Hardware Overview
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/2.png" style={{width:800, height:'auto'}}/></div>
+
+- **USB Type-C**: For power supply and firmware flashing.
+- **FPC Connector**: To connect the ePaper display.
+- **Reset Button**: To reset the board.
+- **User Buttons**: Programmable buttons for user interaction.
+- **Power Switch**: Control the power of battery on/off.
+- **Boot Button**: Used for entering bootloader mode.
+- **LED Indicators**: Status indicators for power and charging.
+- **JST Connector**: 2 pins JST 2.0mm connector to connect battery.
+
+## Getting Started with SenseCraft HMI
+
+This section will guide you through connecting your EE03 to the SenseCraft HMI platform, allowing you to easily update the screen content wirelessly.
+:::tip
+Please note that you need to burn the **SenseCraft HMI EE03 firmware** before you can use the SenseCraft HMI platform.
+:::
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_0.jpg" style={{width:800,height:'auto'}}/></div>
+### Equipment Installation
+
+**Step 1. Connect the Screen and Board**
+Carefully connect the FPC cable of your ePaper screen to the connector on the EE03 driver board. Ensure the locking mechanism is secure.
+
+**Step 2. Power On**
+Connect the EE03 board to a power source (computer or USB adapter) using a USB Type-C cable. Upon powering up, the screen will refresh and display a welcome image.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_1.jpg" style={{width:300,height:'auto'}}/></div>
+
+**Step 3. Enter Network Configuration Mode**
+After the welcome image, the screen will automatically refresh to show the Network Configuration interface. This indicates the device is ready to connect to Wi-Fi.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_3.jpg" style={{width:300,height:'auto'}}/></div>
+
+
+### Network Configuration
+
+**Step 4. Configure Wi-Fi via Mobile Phone**
+Use your mobile phone to scan the QR code displayed on the screen. Follow the prompts on your phone to enter your local Wi-Fi SSID and password to connect the EE03 to the internet.
+
+**Step 5. Obtain Pairing Code**
+Once the network configuration is successful, the screen will refresh again and display a unique **Pairing Code**. You will need this code for the next step.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_2.jpg" style={{width:300,height:'auto'}}/></div>
+
+### Platform Binding & Update
+
+**Step 6. Bind Device on SenseCraft HMI**
+Go to the [SenseCraft HMI Platform](https://sensecraft.seeed.cc/hmi/device). Log in to your account. Navigate to the device management section and select "Add Device". Enter the Pairing Code displayed on your E-ink screen.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_4.jpg" style={{width:800, height:'auto'}}/></div>
+**Step 7. Create and Push New Interface**     
+On the SenseCraft HMI platform, select the template suitable for the 10.3-inch screen to create a new interface or upload an image.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_8.jpg" style={{width:800, height:'auto'}}/></div>
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_5.jpg" style={{width:800, height:'auto'}}/></div>
+
+**Step 8. Apply your images**
+Once finished, click the "Apply" button and select your EE03 device.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_6.jpg" style={{width:800, height:'auto'}}/></div>
+
+**Step 9. Display on the screen**
+Finally the EE03 will receive the data and refresh the 10.3-inch screen with your new content.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/EE03_HMI_7.jpg" style={{width:300, height:'auto'}}/></div>
+
+
+## Getting Started with Arduino
+
+### Install Seeed GFX Library
+
+:::tip
+This library has same function as TFT library and no compatible with it. If you have installed TFT library or other similar display libraries, please uninstall it first.
+:::
+
+Download and install the Seeed GFX library from GitHub.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/xiao_075inch_epaper_panel/fix1.jpg" style={{width:800, height:'auto'}}/></div>
+
+<div align="center">
+<a href="https://github.com/Seeed-Studio/Seeed_Arduino_LCD" target="_blank">
+<p style={{textAlign: 'center'}}><button type="button" className="download" style={{backgroundColor: '#00A418', borderRadius: '8px', border: 'none', color: '#fff', padding: '12px 24px', textAlign: 'center', textDecoration: 'none', display: 'inline-block', fontSize: '16px', margin: '4px 2px', cursor: 'pointer'}}>Click here to download</button></p>
+</a>
+</div>
+Scroll down and open this link.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/xiao_075inch_epaper_panel/fix2.jpg" style={{width:800, height:'auto'}}/></div>
+
+Select your device type and it will generate some code. Copy those code and we will use them later.
+
+:::tip
+If you make the wrong choice, the screen will display nothing.
+
+So please make sure you select the correct device or component type.
+:::
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/3.png" style={{width:800, height:'auto'}}/></div>
+
+After downloading the library, go to **Sketch** -> **Include Library** -> **Add .ZIP Library** and select the downloaded library.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/xiao_075inch_epaper_panel/51.png" style={{width:800, height:'auto'}}/></div>
+
+
+### Configure and burn the program
+Select the example shown in the figure
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/4.png" style={{width:800, height:'auto'}}/></div>
+
+Create a new "driver.h" file and paste those code into it. The code should be like:
+```cpp
+#define BOARD_SCREEN_COMBO 511 // 10.3 inch monochrome ePaper Screen（ED103TC2）
+#define USE_XIAO_EPAPER_DISPLAY_BOARD_EE03
+```
+
+
+After that, go to **Tools** -> **Board** -> **XIAO ESP32S3 Plus** and **Tools** -> **Port** -> **Select the port your board is connected to**. 
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/5.jpg" style={{width:1000, height:'auto'}}/></div>
+
+Note that PSAM must be enabled.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/6.jpg" style={{width:1000, height:'auto'}}/></div>
+
+Then click **Upload** to upload the code.
+Now you will see the feedback in your epaper screen! Following are the results of Bitmap examples.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/Epaper/EE03/7.jpg" style={{width:500, height:'auto'}}/></div>
+
+
+## Troubleshooting
+
+**Q1: The screen does not refresh after powering on.**
+*   Check if the FPC cable is correctly inserted and locked.
+*   Ensure the USB Type-C cable provides sufficient power.
+*   Press the Reset button to restart the board.
+
+**Q2: Wi-Fi configuration fails.**
+*   Ensure your Wi-Fi network is 2.4GHz.
+*   Check if the Wi-Fi password was entered correctly.
+
+**Q3: The screen display is blurry or has ghosting.**
+*   This can happen if the screen hasn't been refreshed for a long time or if the power supply is unstable. Try refreshing the screen again via the HMI platform.
+
+## Resources
+- **[PDF]** [Seeed Studio XIAO ePaper Display EE03 Schematic](https://files.seeedstudio.com/wiki/Epaper/EE03/XIAO_ePaper_Display_Board_EE03_V1.0_SCH_251217.pdf)
+- **[ZIP]** [Seeed Studio XIAO ePaper Display EE03 PCBA&SCH](https://files.seeedstudio.com/wiki/Epaper/EE03/XIAO_ePaper_Display_Board_EE03_V1.0_SCH_&_PCB_251217.zip)
+
+## Tech Support & Product Discussion
+
+Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible.
+
+<div class="table-center">
+  <div class="button_tech_support_container">
+  <a href="https://forum.seeedstudio.com/" class="button_forum"></a> 
+  <a href="https://www.seeedstudio.com/contacts" class="button_email"></a>
+  </div>
+
+  <div class="button_tech_support_container">
+  <a href="https://discord.gg/eWkprNDMU7" class="button_discord"></a> 
+  <a href="https://github.com/Seeed-Studio/wiki-documents/discussions/69" class="button_discussion"></a>
+  </div>
+</div>
diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/_category_.yml b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/_category_.yml
@@ -0,0 +1,5 @@
+position: 2
+label: 'XIAO ePaper Display Board EE03'
+collapsible: true
+collapsed: true
+className: xiao_epaper_display_board_ee03
diff --git a/...pplications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md b/...pplications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md
@@ -15,6 +15,8 @@ last_update:
   author: Twelve
 ---
 
+
+# 测试版本,请忽略本维基。
 # 刷写Watcher 小智版固件
 
 ## 概述