Home

Configuration Guide: Tibbo DS1101 + T‑Scale BW‑R Weighting Device

Steps

1. Ensure the module is in idle/setup mode – see Main Status LEDs.
2. Connect an Ethernet cable to the module.
3. Download and install TDST.
4. Set the module's IP address – video tutorial.
5. Open the web interface at the module's IP address.

   Note: When prompted for a password, just leave the password field empty and confirm.

6. Go to the Wi‑Fi Settings tab.
7. Enter the wireless network credentials (SSID and password).
8. Reboot the module using the side panel.
9. Confirm the Wi‑Fi connection – see Wi‑Fi Status LEDs.
10. Reopen the web interface, open the Serial Settings tab, and configure the parameters as shown in the reference image:

Further Documentation

• DS1101
• General Documentation