SiliconLabsSoftware · silabs-ArghyaD · Oct 23, 2025 · Nov 4, 2025 · Nov 5, 2025
@@ -1,72 +1,72 @@
-# Build Procedure For Matter + AWS
-
-The following components are common for all apps and should be modified in the corresponding application-specific `.slcp` file.
-
-## How to Add the Matter + AWS Component
-
-To add the Matter + AWS component, modify the corresponding application-specific `.slcp` file.
-
-```shell
-  - id: matter_aws
-    from: matter
-```
-To enable the component in Simplicity Studio, add the following components.
-
-- Go to **Software** components, search for `Matter_Wifi`. Click on **Settings** symbol beside Matter Wi-fi component in the left panel and enable IPV4 configuration.
-    ![IPV4 Component](images/matter_aws_ipv4_enable_1.png)
-    ![IPV4 Settings Enable](images/matter_aws_ipv4_enable_2.png)
-
-- In **Software Components**, search for `aws` and install the Matter AWS component.
-
-- Next, select the dependencies for the Matter AWS component.
- ![Default Entropy Source for Matter + AWS](images/matter_aws_dependency_1.png)
- ![Public-Key Abstaction Layer for Matter + AWS](images/matter_aws_dependency_2.png)
-
-## How to Add the Matter + AWS Server, Client, Cluster Details.
-
-- Update the definitions for the server ID, client ID and cluster in `MatterAwsConfig.h`:    
-    - Update the AWS server name at `#define MATTER_AWS_SERVER_HOST ""`.
-    - Update the client ID at `#define MATTER_AWS_CLIENT_ID ""`.
-    - Update the cluster information at `#define ZCL_USING_THERMOSTAT_CLUSTER_SERVER`.
-
-
-## Building Matter + AWS Application
-
-- After you finish modifying the **.slcp** project file as described above, refresh the `matter-extension` in Simplicity Studio.
-
--  On the **Launcher** tab, select **Preferences**.
-
- ![Select Preferences](images/select-preferences.png)
-
-- Expand the **Simplicity Studio** section, and click the **SDKs** tab.
-
- ![Select SDK](images/select-studio-sdk-option.png)
-
-- Expand **Simplicity SDK**, and click **Refresh** in the side menu.
-
- ![Select Refresh](images/select-refresh-option.png)
-
-- Build the Matter + AWS application using Simplicity Studio as described in
-  - [Build SOC Application Using Studio](/matter/{build-docspace-version}/matter-wifi-run-demo/build-soc-application-using-studio).
-
-## Compile using new/different certificates
-
--   Two devices should not use the same client ID. Use a different client ID for
-    your second connection.
--   While using AWS, update the following information:
-    -   Add your AWS certificates in file
-        `examples/platform/silabs/matter_aws/matter_aws_interface/include/MatterAwsNvmCert.h`
-        -   Provide the AWS Root CA key
-            (https://www.amazontrust.com/repository/AmazonRootCA3.pem)
-        -   Provide `device_certificate` and `device_key` with your device certificate and
-            device key. For more details, refer to
-            [OpenSSL Device Certificate Creation] (./openssl-certificate-creation.md)
-    -   Add your AWS server and client ID information to the
-        `examples/platform/silabs/matter_aws/matter_aws_interface/include/MatterAwsConfig.h` file.
-        -   Provide `MATTER_AWS_SERVER_HOST` with your AWS Server name.
-        -   Provide `MATTER_AWS_CLIENT_ID` with your device/thing ID.
-        -   Provide  `ZCL_USING_THERMOSTAT_CLUSTER_SERVER` with the cluster details.
--   The preferred certificate type to use in the application is ECDSA.
--   AWS RootCA used in this PoC is
-    https://www.amazontrust.com/repository/AmazonRootCA3.pem
-
+# Build Procedure For Matter + AWS
+
+The following components are common for all apps and should be modified in the corresponding application-specific `.slcp` file using the Studio Project Configurator tool.
+
+## How to Add the Matter + AWS Component
+To enable the component in Simplicity Studio, add the following components.
+
+- Go to **Software** components, search for `Matter_Wifi`. Click on **Settings** symbol beside Matter Wi-fi component in the left panel and enable IPV4 configuration.
+    ![IPV4 Component](images/matter_aws_ipv4_enable_1.png)
+    ![IPV4 Settings Enable](images/matter_aws_ipv4_enable_2.png)
+
+- In **Software Components**, search for `aws` and install the Matter AWS component.
+
+- Next, select the dependencies for the Matter AWS component.
+ ![Default Entropy Source for Matter + AWS](images/matter_aws_dependency_1.png)
+ ![Public-Key Abstaction Layer for Matter + AWS](images/matter_aws_dependency_2.png)
+
+## How to Add the Matter + AWS Server, Client, Cluster Details.
+- Go to the `matter_<version>/third_party/matter_sdk/examples/platform/silabs/matter_aws/matter_aws_interface/include/` folder from Project Explorer.
+- Update the definitions for the server ID, client ID and cluster in `MatterAwsConfig.h`:    
+    - Update the AWS server name at `#define MATTER_AWS_SERVER_HOST ""`.
+    - Update the client ID at `#define MATTER_AWS_CLIENT_ID ""`.
+    - Update the cluster information based on your app, with reference to the below table:
+
+| Application Type | Cluster Definition |
+|------------------|--------------------|
+| Matter Thermostat | `#define ZCL_USING_THERMOSTAT_CLUSTER_SERVER` |
+| Matter Light | `#define ZCL_USING_ON_OFF_CLUSTER_SERVER` |
+| Matter Lock | `#define ZCL_USING_DOOR_LOCK_CLUSTER_SERVER` |
+| Matter Window Covering | `#define ZCL_USING_WINDOW_COVERING_CLUSTER_SERVER` |
+
+
+## Building Matter + AWS Application
+
+- After adding the Matter + AWS component as described above, refresh the `matter-extension` in Simplicity Studio.
+
+-  On the **Launcher** tab, select **Preferences**.
+
+ ![Select Preferences](images/select-preferences.png)
+
+- Expand the **Simplicity Studio** section, and click the **SDKs** tab.
+
+ ![Select SDK](images/select-studio-sdk-option.png)
+
+- Expand **Simplicity SDK**, and click **Refresh** in the side menu.
+
+ ![Select Refresh](images/select-refresh-option.png)
+
+- Build the Matter + AWS application using Simplicity Studio as described in
+  - [Build SOC Application Using Studio](/matter/{build-docspace-version}/matter-wifi-run-demo/build-soc-application-using-studio).
+
+## Compile using new/different certificates
+
+-   Two devices should not use the same client ID. Use a different client ID for
+    your second connection.
+-   While using AWS, update the following information:
+    -   Add your AWS certificates in file
+        `examples/platform/silabs/matter_aws/matter_aws_interface/include/MatterAwsNvmCert.h`
+        -   Provide the AWS Root CA key
+            (https://www.amazontrust.com/repository/AmazonRootCA3.pem)
+        -   Provide `device_certificate` and `device_key` with your device certificate and
+            device key. For more details, refer to
+            [OpenSSL Device Certificate Creation] (./openssl-certificate-creation.md)
+    -   Add your AWS server and client ID information to the
+        `examples/platform/silabs/matter_aws/matter_aws_interface/include/MatterAwsConfig.h` file.
+        -   Provide `MATTER_AWS_SERVER_HOST` with your AWS Server name.
+        -   Provide `MATTER_AWS_CLIENT_ID` with your device/thing ID.
+        -   Provide  `ZCL_USING_THERMOSTAT_CLUSTER_SERVER` with the cluster details.
+-   The preferred certificate type to use in the application is ECDSA.
+-   AWS RootCA used in this PoC is
+    https://www.amazontrust.com/repository/AmazonRootCA3.pem
+
@@ -1,124 +1,126 @@
-# Matter + AWS Component
-
--   Matter + AWS is a Silicon Labs–specific feature that enables Matter devices to connect directly to 
-    proprietary cloud solutions, such as AWS Cloud.  As such, a Matter Wi-Fi device
-    must support connecting locally on the Matter Fabric via IPv6 and
-    connecting to the Internet via IPv4.
--   Matter devices can be controlled by chip-tool or a controller. The
-    status of the modified attributes will be published to the cloud.
--   Remote users can install a cloud-specific application to receive
-    notifications about the attribute status.
-
-## Matter + AWS Feature Diagram
-
-The following diagram shows end-to-end flow for Direct Internet Connectivity.
-
-![Silicon Labs - Matter + AWS design](./images/matter-aws-flow.png)
-
-## Prerequisites
-
-### Hardware Requirements
-
-For a list of hardware requirements for the Matter + AWS feature, see the
-official
-[Silicon Labs Matter hardware requirements](https://siliconlabs.github.io/matter/latest/general/HARDWARE_REQUIREMENTS.html)
-documentation.
-
-### Software Requirements
-
-For a list of software requirements for the Matter + AWS feature, see the
-official
-[Silicon Labs Matter Software requirements](https://siliconlabs.github.io/matter/latest/general/SOFTWARE_REQUIREMENTS.html)
-documentation.
-
-## End-to-End Set-up bring up
-
-### Message Queuing Telemetry Transport (MQTT)
-
-MQTT is an OASIS standard messaging protocol for the Internet of Things
-    (IoT). It is designed as an extremely lightweight publish/subscribe
-    messaging transport that is ideal for connecting remote devices with a small
-    code footprint and minimal network bandwidth. 
-    For more details, visit https://mqtt.org/.
-
-### Configuring the MQTT server
-
-To set up and configure AWS for Matter + AWS support, see the following documentation:
-
-- [AWS installation](./aws-configuration-registration.md)
-
-### Remote User Setup (MQTT Explorer) (optional)
-
-Remote users are used to check the state of Matter devices. In this context, MQTT Explorer acts as a remote user. For more information, see [MQTT Explorer Setup and Configuration](./mqtt-explorer-setup.md).
-
-### Building Matter + AWS Application using Simplicity Studio
-
-Follow the instructions in [Build MATTER + AWS](./build-matter-aws.md) to enable the MATTER + AWS feature in your application code.
-
-
-## End-to-End Test of Matter + AWS Application
-
-User Setup (MQTT Explorer):
-
-- Sharing status of device to cloud
-  - The following diagram shows the end-to-end flow for sharing status from a Matter device to the cloud.
-
-![Silicon Labs - Matter + AWS design](images/dic-status-sharing.png)
-
-  **Note**: For reference, the diagram shows Lighting App commands. Other application commands also can be passed.
-
-- For the end-to-end commands to be executed from chip-tool, refer to [Running the Matter Demo Over Wi-Fi](/matter/{build-docspace-version}/matter-wifi-run-demo).
-- The following application-specific attributes or states are shared to the cloud:
-  - For Lighting App, On/Off Attributes
-  - For Lock App, lock/unlock Attributes
-  - For Windows App, lift/tilt Attributes
-  - For Thermostat App, SystemMode/CurrentTemp/LocalTemperature/OccupiedCoolingSetpoint/OccupiedHeatingSetpoint Attributes
-  - For On/off Plug App, On/Off Attributes
-  - The MQTT Explorer UI updates the application status as shown in following image.
-
-      ![Matter + AWS status update](images/mqtt-explorer-4.png)
-
-- Control of the device through cloud interface
-  - The following diagram shows the end-to-end flow for control of the Matter device through a cloud interface.
-
-      ![Silicon Labs - Matter + AWS design](images/dic-control-part.png)
-
-    **Note**: For reference, the diagram shows Lighting App commands. Other application commands also can be passed.
-
-  - Ensure that the Matter device is running and successfully commissioned. For detailed steps, refer to [Running the Matter Demo Over Wi-Fi](/matter/{build-docspace-version}/matter-wifi-run-demo).
-  - To control the device, set the topic name and the commands to be executed in the MQTT Explorer for the following applications.
-
-```shell
-    - Lighting App
-      - Topic: command
-        - Commands:
-           - toggle
-           - on
-           - off
-    - Onoff-plug App
-      - Topic: command
-        - Commands:
-          - toggle
-          - on
-          - off
-    - Lock App
-      - Topic: command
-        - Commands:
-          - lock
-          - unlock
-    - Thermostat App
-      - Topic: command
-        - Commands:
-          - SetMode/value(value need to provide 1,2,3,4 ex:SetMode/1)
-          - Heating/value(value need to provide 2500,2600 ex:HeatingSetPoint/2500)
-          - Cooling/value(value need to provide 2500,2600 ex:CoolingSetPoint/2500)
-    - Window App
-      - Topic: command
-        - Commands:
-          - Lift/value(value need to provide in range 1000 to 10000)
-          - Tilt/value(value need to provide in range 1000 to 10000)
-```
-
-- Click **Publish** to execute the command.
-
-![Silicon Labs - Matter + AWS design](images/control-device-through-cloud.png)
+# Matter + AWS Component
+
+-   Matter + AWS is a Silicon Labs–specific feature that enables Matter devices to connect directly to 
+    proprietary cloud solutions, such as AWS Cloud.  As such, a Matter Wi-Fi device
+    must support connecting locally on the Matter Fabric via IPv6 and
+    connecting to the Internet via IPv4.
+-   Matter devices can be controlled by chip-tool or a controller. The
+    status of the modified attributes will be published to the cloud.
+-   Remote users can install a cloud-specific application to receive
+    notifications about the attribute status.
+
+## Matter + AWS Feature Diagram
+
+The following diagram shows end-to-end flow for Direct Internet Connectivity.
+
+![Silicon Labs - Matter + AWS design](./images/matter-aws-flow.png)
+
+## Prerequisites
+
+### Hardware Requirements
+
+For a list of hardware requirements for the Matter + AWS feature, see the
+official
+[Silicon Labs Matter hardware requirements](https://siliconlabs.github.io/matter/latest/general/HARDWARE_REQUIREMENTS.html)
+documentation.
+
+> Note: This feature is only supported for 917SOC
+
+### Software Requirements
+
+For a list of software requirements for the Matter + AWS feature, see the
+official
+[Silicon Labs Matter Software requirements](https://siliconlabs.github.io/matter/latest/general/SOFTWARE_REQUIREMENTS.html)
+documentation.
+
+## End-to-End Set-up bring up
+
+### Message Queuing Telemetry Transport (MQTT)
+
+MQTT is an OASIS standard messaging protocol for the Internet of Things
+    (IoT). It is designed as an extremely lightweight publish/subscribe
+    messaging transport that is ideal for connecting remote devices with a small
+    code footprint and minimal network bandwidth. 
+    For more details, visit https://mqtt.org/.
+
+### Configuring the MQTT server
+
+To set up and configure AWS for Matter + AWS support, see the following documentation:
+
+- [AWS installation](./aws-configuration-registration.md)
+
+### Remote User Setup (MQTT Explorer) (optional)
+
+Remote users are used to check the state of Matter devices. In this context, MQTT Explorer acts as a remote user. For more information, see [MQTT Explorer Setup and Configuration](./mqtt-explorer-setup.md).
+
+### Building Matter + AWS Application using Simplicity Studio
+
+Follow the instructions in [Build MATTER + AWS](./build-matter-aws.md) to enable the MATTER + AWS feature in your application code.
+
+
+## End-to-End Test of Matter + AWS Application
+
+User Setup (MQTT Explorer):
+
+- Sharing status of device to cloud
+  - The following diagram shows the end-to-end flow for sharing status from a Matter device to the cloud.
+
+![Silicon Labs - Matter + AWS design](images/dic-status-sharing.png)
+
+  **Note**: For reference, the diagram shows Lighting App commands. Other application commands also can be passed.
+
+- For the end-to-end commands to be executed from chip-tool, refer to [Running the Matter Demo Over Wi-Fi](/matter/{build-docspace-version}/matter-wifi-run-demo).
+- The following application-specific attributes or states are shared to the cloud:
+  - For Lighting App, On/Off Attributes
+  - For Lock App, lock/unlock Attributes
+  - For Windows App, lift/tilt Attributes
+  - For Thermostat App, SystemMode/CurrentTemp/LocalTemperature/OccupiedCoolingSetpoint/OccupiedHeatingSetpoint Attributes
+  - For On/off Plug App, On/Off Attributes
+  - The MQTT Explorer UI updates the application status as shown in following image.
+
+      ![Matter + AWS status update](images/mqtt-explorer-4.png)
+
+- Control of the device through cloud interface
+  - The following diagram shows the end-to-end flow for control of the Matter device through a cloud interface.
+
+      ![Silicon Labs - Matter + AWS design](images/dic-control-part.png)
+
+    **Note**: For reference, the diagram shows Lighting App commands. Other application commands also can be passed.
+
+  - Ensure that the Matter device is running and successfully commissioned. For detailed steps, refer to [Running the Matter Demo Over Wi-Fi](/matter/{build-docspace-version}/matter-wifi-run-demo).
+  - To control the device, set the topic name and the commands to be executed in the MQTT Explorer for the following applications.
+
+```shell
+    - Lighting App
+      - Topic: command
+        - Commands:
+           - toggle
+           - on
+           - off
+    - Onoff-plug App
+      - Topic: command
+        - Commands:
+          - toggle
+          - on
+          - off
+    - Lock App
+      - Topic: command
+        - Commands:
+          - lock
+          - unlock
+    - Thermostat App
+      - Topic: command
+        - Commands:
+          - SetMode/value(value need to provide 1,2,3,4 ex:SetMode/1)
+          - Heating/value(value need to provide 2500,2600 ex:HeatingSetPoint/2500)
+          - Cooling/value(value need to provide 2500,2600 ex:CoolingSetPoint/2500)
+    - Window App
+      - Topic: command
+        - Commands:
+          - Lift/value(value need to provide in range 1000 to 10000)
+          - Tilt/value(value need to provide in range 1000 to 10000)
+```
+
+- Click **Publish** to execute the command.
+
+![Silicon Labs - Matter + AWS design](images/control-device-through-cloud.png)