per-merge-testing

What is Klipper: https://www.klipper3d.org/
This is tested with octoprint using octoklipper. Also tested with mainsail
This firmware is for the H32 only it will not work in G32, N32 etc.

Creality Ender Pro 2 with HC32:
file below named klipper_pro2.bin - rename to firmware.bin
put in directory named /user on SD card: /user/firmware.bin

Voxelab Aquila:
klipper_O1 - for original aquila
klipper_C2 (also X1 or others)
copy appropriate bin to sdcard folder /firmware/ and turn on
Testing for the O1 (Aquila) and Aquila-C2 (others may work)
O1 has the FFP0173_Aquila_Main_Board_V1.0.3
C2 has the FFP0234_Aquila_X1_Main_Board_V1.0.0
No display support for the O1
Display works on the C2

Anycube kobra firmware: trigorilla board 170 (it might work on the new one)
klipper.bin file goes into top directory as only file on SDcard - the beeper will beep a few times on success
Note that the board needs R65 moved to R66 so that the X stepper driver can be addressed.
Jan 4 2023 - beeper fixed

some configs here for aquila, kobra https://github.com/SteveGotthardt/klipper/tree/hc32f460_work/config