Search results

Hardware Timer + ADC Simulations & anything dependent on them are not working as intended(No Simulation Errors)Exp 19, 20, 21, 22, 23, 24, 25, 28, 29, 30, 31, 32, 33, 34 are not working as intended__But you can still interact with them, see oscilloscope/other measurements

bugSomething isn't workingSomething isn't working

help wantedExtra attention is neededExtra attention is needed

questionFurther information is requestedFurther information is requested

wontfixThis will not be worked onThis will not be worked on

Status: Open.

#11 In Subhankar2000/MSP430G2553-Proteus-v8.9-Simulation;

· Subhankar2000 opened on Nov 16, 2020

Port 1 pin 4 (P1.4) is not working as programmed__So, I am just changing every P1 pin 4 to P2 pin 4 or P3 pin 4 as needed

bugSomething isn't workingSomething isn't working

help wantedExtra attention is neededExtra attention is needed

wontfixThis will not be worked onThis will not be worked on

Status: Open.

#3 In Subhankar2000/MSP430G2553-Proteus-v8.9-Simulation;

· Subhankar2000 opened on Nov 15, 2020

"Exp09_LunchBox_HelloResetSource" not working(No Simulation Errors) but can't get the desired output__Still you can still interact with them, see oscilloscope/other measurements

bugSomething isn't workingSomething isn't working

help wantedExtra attention is neededExtra attention is needed

questionFurther information is requestedFurther information is requested

wontfixThis will not be worked onThis will not be worked on

Status: Open.

#2 In Subhankar2000/MSP430G2553-Proteus-v8.9-Simulation;

· Subhankar2000 opened on Nov 15, 2020

Can't manage to get Hardware UART working__So, I left the hardware UART, I have managed to get software UART working

bugSomething isn't workingSomething isn't working

good first issueGood for newcomersGood for newcomers

help wantedExtra attention is neededExtra attention is needed

wontfixThis will not be worked onThis will not be worked on

Status: Open.

#1 In Subhankar2000/MSP430G2553-Proteus-v8.9-Simulation;

· Subhankar2000 opened on Nov 15, 2020