asap7: remove old multipler code from make_tracks & tapcell

Signed-off-by: Matt Liberty <[email protected]>

Author: maliberty

flow/platforms/asap7/openRoad/make_tracks.tcl

@@ -1,21 +1,18 @@
+make_tracks Pad -x_offset 0.116 -x_pitch 0.080 -y_offset 0.116 -y_pitch 0.080
+make_tracks M9  -x_offset 0.116 -x_pitch 0.080 -y_offset 0.116 -y_pitch 0.080
+make_tracks M8  -x_offset 0.116 -x_pitch 0.080 -y_offset 0.116 -y_pitch 0.080
+make_tracks M7  -x_offset 0.016 -x_pitch 0.064 -y_offset 0.016 -y_pitch 0.064
+make_tracks M6  -x_offset 0.012 -x_pitch 0.048 -y_offset 0.016 -y_pitch 0.064
+make_tracks M5  -x_offset 0.012 -x_pitch 0.048 -y_offset 0.012 -y_pitch 0.048
+make_tracks M4  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.012 -y_pitch 0.048
+make_tracks M3  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.009 -y_pitch 0.036
 
-set multiplier 1
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.045 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.081 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.117 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.153 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.189 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.225 -y_pitch 0.270
+make_tracks M2  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.270 -y_pitch 0.270
 
-make_tracks Pad -x_offset [expr 0.116 * $multiplier] -x_pitch [expr 0.08  * $multiplier] -y_offset [expr 0.116 * $multiplier] -y_pitch [expr 0.08 * $multiplier]
-make_tracks M9  -x_offset [expr 0.116 * $multiplier] -x_pitch [expr 0.08  * $multiplier] -y_offset [expr 0.116 * $multiplier] -y_pitch [expr 0.08 * $multiplier]
-make_tracks M8  -x_offset [expr 0.116 * $multiplier] -x_pitch [expr 0.08  * $multiplier] -y_offset [expr 0.116 * $multiplier] -y_pitch [expr 0.08 * $multiplier]
-make_tracks M7  -x_offset [expr 0.016 * $multiplier] -x_pitch [expr 0.064 * $multiplier] -y_offset [expr 0.016 * $multiplier] -y_pitch [expr 0.064 * $multiplier]
-make_tracks M6  -x_offset [expr 0.012 * $multiplier] -x_pitch [expr 0.048 * $multiplier] -y_offset [expr 0.016 * $multiplier] -y_pitch [expr 0.064 * $multiplier]
-make_tracks M5  -x_offset [expr 0.012 * $multiplier] -x_pitch [expr 0.048 * $multiplier] -y_offset [expr 0.012 * $multiplier] -y_pitch [expr 0.048 * $multiplier]
-make_tracks M4  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr 0.012 * $multiplier] -y_pitch [expr 0.048 * $multiplier]
-make_tracks M3  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr 0.009 * $multiplier] -y_pitch [expr 0.036 * $multiplier]
-
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.045 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.081 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.117 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.153 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.189 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.225 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-make_tracks M2  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr (0.270 - 0.000) * $multiplier] -y_pitch [expr 0.270 * $multiplier]
-
-make_tracks M1  -x_offset [expr 0.009 * $multiplier] -x_pitch [expr 0.036 * $multiplier] -y_offset [expr 0.009 * $multiplier] -y_pitch [expr 0.036 * $multiplier]
+make_tracks M1  -x_offset 0.009 -x_pitch 0.036 -y_offset 0.009 -y_pitch 0.036

flow/platforms/asap7/openRoad/tapcell.tcl

@@ -1,13 +1,9 @@
-set multiplier 1
-
 puts "\[INFO-FLOW\] Tap and End Cap cell insertion"
 puts "\[INFO-FLOW\]   TAP Cell          : $::env(TAP_CELL_NAME)"
 puts "\[INFO-FLOW\]   ENDCAP Cell       : $::env(TAP_CELL_NAME)"
 puts "\[INFO-FLOW\]   TAP Cell Distance : 25"
 
 tapcell \
-  -distance [expr 25 * $multiplier] \
+  -distance 25 \
   -tapcell_master "$::env(TAP_CELL_NAME)" \
-  -endcap_master "$::env(TAP_CELL_NAME)" \
-
-#  -endcap_master "DECAPx1_ASAP7_75t_R"
+  -endcap_master "$::env(TAP_CELL_NAME)"