-
Notifications
You must be signed in to change notification settings - Fork 4
PMIX
a performance mixer for the Percussa SSP
Note: This is the primary page for documentation on this modules
- Wiki - https://github.com/TheTechnobear/SSP/wiki/PMIX
- Forum - https://forum.percussa.com/t/pmix-performance-mixer-by-thetechnobear
I develop these plugins for free, please consider supporting my efforts with a donation. https://ko-fi.com/thetechnobear
| Name | Desc |
|---|---|
| Level 1-8, Main,Cue,Aux 1-2 | level control for channel to main |
| Pan 1-8, Main,Cue,Aux 1-2 | pan control for channel |
| Cue 1-8, Main,Cue,Aux 1-2 | level control for channel to cue |
| Aux 1 1-8, Main,Cue,Aux 1-2 | level control for channel to aux 1 |
| Aux 2 1-8, Main,Cue,Aux 1-2 | level control for channel to aux 2 |
| Gain 1-8, Main,Cue,Aux 1-2 | Input gain of channel |
| Name | Desc |
|---|---|
| In 1-8 | input signals |
| Name | Desc |
|---|---|
| Main L/R | main stereo output |
| Cue L/R | cue stereo output |
| Aux 1 L/R | aux 1 stereo output |
| Aux 2 L/R | aux 2 stereo output |
| Name | Desc |
|---|---|
| Mute 1-8, Main,Cue,Aux 1-2 | mute channel |
| Solo 1-8, Main,Cue,Aux 1-2 | solo channel |
| Cue 1-8, Main,Cue,Aux 1-2 | cue channel |
| AC, Main,Cue,Aux 1-2 | is channel AC/audio , if so remove DC offset |
| IN14, OUT14,IN58 | select channels for input, toggle and momentary |
8 input channels with individual pan/mute/solo and levels for main,cue , aux 1 and 2
4 stereo output channels, main/cue and aux1/aux2, with levels, mute,solo
LS/RS/UP : select in 1-4, 5-6 and output groups for encoders and buttons
EN+/- : used to select what encoders control MODE : selects button mode
encoder buttons : reset or toggle levels etc.
CUE - mutes channel on main output, and moves it to CUE channel AC - places a DC blocker on the channel, useful for almost all audio signals - you can remove if you are doing DC mixing
note: CUE and AUX levels are only for input channels.
The channel selection buttons work as momentary switches, so you do not have to switch the focus, just hold button and use encoders.
Input levels are pre-fader (since levels are independent) Output levels are post-fader
DC mixing is possible, but vu-meters might be 'unexpected' ;)
GAIN is pre-fader
- 2.0.0 release for new ssp image
- 1.4.1 release
- 1.4.0 early access release - midi learn
- 1.3.1 release, re-write using new infra and ui
- 1.3.0 early access release
- 1.0.1 Show channels if channels are enabled/disabled
- 1.0.0 Initial Release