Accumulator miscellanea: Subset, merge, acclogp, and LogProbAccumulator

HISTORY.md

@@ -32,20 +32,40 @@ Their semantics are the same as in Julia's `isapprox`; two values are equal if t
 You now need to explicitly pass a `VarInfo` argument to `check_model` and `check_model_and_trace`.
 Previously, these functions would generate a new VarInfo for you (using an optionally provided `rng`).
 
-### Removal of `PriorContext` and `LikelihoodContext`
-
-A number of DynamicPPL's contexts have been removed, most notably `PriorContext` and `LikelihoodContext`.
-Although these are not the only _exported_ contexts, we consider unlikely that anyone was using _other_ contexts manually: if you have a question about contexts _other_ than these, please continue reading the 'Internals' section below.
+### Evaluating model log-probabilities in more detail
 
 Previously, during evaluation of a model, DynamicPPL only had the capability to store a _single_ log probability (`logp`) field.
 `DefaultContext`, `PriorContext`, and `LikelihoodContext` were used to control what this field represented: they would accumulate the log joint, log prior, or log likelihood, respectively.
 
-Now, we have reworked DynamicPPL's `VarInfo` object such that it can track multiple log probabilities at once (see the 'Accumulators' section below).
+In this version, we have overhauled this quite substantially.
+The technical details of exactly _how_ this is done is covered in the 'Accumulators' section below, but the upshot is that the log prior, log likelihood, and log Jacobian terms (for any linked variables) are separately tracked.
+
+Specifically, you will want to use the following functions to access these log probabilities:
+
+  - `getlogprior(varinfo)` to get the log prior. **Note:** This version introduces new, more consistent behaviour for this function, in that it always returns the log-prior of the values in the original, untransformed space, even if the `varinfo` has been linked.
+  - `getloglikelihood(varinfo)` to get the log likelihood.
+  - `getlogjoint(varinfo)` to get the log joint probability. **Note:** Similar to `getlogprior`, this function now always returns the log joint of the values in the original, untransformed space, even if the `varinfo` has been linked.
+
+If you are using linked VarInfos (e.g. if you are writing a sampler), you may find that you need to obtain the log probability of the variables in the transformed space.
+To this end, you can use:
+
+  - `getlogjac(varinfo)` to get the log Jacobian of the link transforms for any linked variables.
+  - `getlogprior_internal(varinfo)` to get the log prior of the variables in the transformed space.
+  - `getlogjoint_internal(varinfo)` to get the log joint probability of the variables in the transformed space.
+
+Since transformations only apply to random variables, the likelihood is unaffected by linking.
+
+### Removal of `PriorContext` and `LikelihoodContext`
+
+Following on from the above, a number of DynamicPPL's contexts have been removed, most notably `PriorContext` and `LikelihoodContext`.
+Although these are not the only _exported_ contexts, we consider unlikely that anyone was using _other_ contexts manually: if you have a question about contexts _other_ than these, please continue reading the 'Internals' section below.
+
 If you were evaluating a model with `PriorContext`, you can now just evaluate it with `DefaultContext`, and instead of calling `getlogp(varinfo)`, you can call `getlogprior(varinfo)` (and similarly for the likelihood).
 
 If you were constructing a `LogDensityFunction` with `PriorContext`, you can now stick to `DefaultContext`.
 `LogDensityFunction` now has an extra field, called `getlogdensity`, which represents a function that takes a `VarInfo` and returns the log density you want.
-Thus, if you pass `getlogprior` as the value of this parameter, you will get the same behaviour as with `PriorContext`.
+Thus, if you pass `getlogprior_internal` as the value of this parameter, you will get the same behaviour as with `PriorContext`.
+(You should consider whether your use case needs the log prior in the transformed space, or the original space, and use (respectively) `getlogprior_internal` or `getlogprior` as needed.)
 
 The other case where one might use `PriorContext` was to use `@addlogprob!` to add to the log prior.
 Previously, this was accomplished by manually checking `__context__ isa DynamicPPL.PriorContext`.

benchmarks/src/DynamicPPLBenchmarks.jl

@@ -86,7 +86,9 @@ function make_suite(model, varinfo_choice::Symbol, adbackend::Symbol, islinked::
         vi = DynamicPPL.link(vi, model)
     end
 
-    f = DynamicPPL.LogDensityFunction(model, DynamicPPL.getlogjoint, vi; adtype=adbackend)
+    f = DynamicPPL.LogDensityFunction(
+        model, DynamicPPL.getlogjoint_internal, vi; adtype=adbackend
+    )
     # The parameters at which we evaluate f.
     θ = vi[:]
 

docs/make.jl

@@ -21,7 +21,9 @@ makedocs(;
     sitename="DynamicPPL",
     # The API index.html page is fairly large, and violates the default HTML page size
     # threshold of 200KiB, so we double that.
-    format=Documenter.HTML(; size_threshold=2^10 * 400),
+    format=Documenter.HTML(;
+        size_threshold=2^10 * 400, mathengine=Documenter.HTMLWriter.MathJax3()
+    ),
     modules=[DynamicPPL, Base.get_extension(DynamicPPL, :DynamicPPLMCMCChainsExt)],
     pages=[
         "Home" => "index.md", "API" => "api.md", "Internals" => ["internals/varinfo.md"]

docs/src/api.md

@@ -367,6 +367,7 @@ DynamicPPL provides the following default accumulators.
 
 ```@docs
 LogPriorAccumulator
+LogJacobianAccumulator
 LogLikelihoodAccumulator
 VariableOrderAccumulator
 ```
@@ -380,7 +381,12 @@ getlogp
 setlogp!!
 acclogp!!
 getlogjoint
+getlogjoint_internal
+getlogjac
+setlogjac!!
+acclogjac!!
 getlogprior
+getlogprior_internal
 setlogprior!!
 acclogprior!!
 getloglikelihood

src/DynamicPPL.jl

@@ -50,6 +50,7 @@ export AbstractVarInfo,
     AbstractAccumulator,
     LogLikelihoodAccumulator,
     LogPriorAccumulator,
+    LogJacobianAccumulator,
     VariableOrderAccumulator,
     push!!,
     empty!!,
@@ -58,10 +59,16 @@ export AbstractVarInfo,
     getlogjoint,
     getlogprior,
     getloglikelihood,
+    getlogjac,
+    getlogjoint_internal,
+    getlogprior_internal,
     setlogp!!,
     setlogprior!!,
+    setlogjac!!,
     setloglikelihood!!,
+    acclogp,
     acclogp!!,
+    acclogjac!!,
     acclogprior!!,
     accloglikelihood!!,
     resetlogp!!,

src/abstract_varinfo.jl

@@ -99,16 +99,34 @@ See also: [`getlogprior`](@ref), [`getloglikelihood`](@ref).
 """
 getlogjoint(vi::AbstractVarInfo) = getlogprior(vi) + getloglikelihood(vi)
 
+"""
+    getlogjoint_internal(vi::AbstractVarInfo)
+
+Return the log of the joint probability of the observed data and parameters as
+they are stored internally in `vi`, including the log-Jacobian for any linked
+parameters.
+
+In general, we have that:
+
+```julia
+getlogjoint_internal(vi) == getlogjoint(vi) - getlogjac(vi)
+```
+"""
+getlogjoint_internal(vi::AbstractVarInfo) =
+    getlogprior(vi) + getloglikelihood(vi) - getlogjac(vi)
+
 """
     getlogp(vi::AbstractVarInfo)
 
-Return a NamedTuple of the log prior and log likelihood probabilities.
+Return a NamedTuple of the log prior, log Jacobian, and log likelihood probabilities.
 
-The keys are called `logprior` and `loglikelihood`. If either one is not present in `vi` an
-error will be thrown.
+The keys are called `logprior`, `logjac`, and `loglikelihood`. If any of them
+are not present in `vi` an error will be thrown.
 """
 function getlogp(vi::AbstractVarInfo)
-    return (; logprior=getlogprior(vi), loglikelihood=getloglikelihood(vi))
+    return (;
+        logprior=getlogprior(vi), logjac=getlogjac(vi), loglikelihood=getloglikelihood(vi)
+    )
 end
 
 """
@@ -164,6 +182,30 @@ See also: [`getlogjoint`](@ref), [`getloglikelihood`](@ref), [`setlogprior!!`](@
 """
 getlogprior(vi::AbstractVarInfo) = getacc(vi, Val(:LogPrior)).logp
 
+"""
+    getlogprior_internal(vi::AbstractVarInfo)
+
+Return the log of the prior probability of the parameters as stored internally
+in `vi`. This includes the log-Jacobian for any linked parameters.
+
+In general, we have that:
+
+```julia
+getlogprior_internal(vi) == getlogprior(vi) - getlogjac(vi)
+```
+"""
+getlogprior_internal(vi::AbstractVarInfo) = getlogprior(vi) - getlogjac(vi)
+
+"""
+    getlogjac(vi::AbstractVarInfo)
+
+Return the accumulated log-Jacobian term for any linked parameters in `vi`. The
+Jacobian here is taken with respect to the forward (link) transform.
+
+See also: [`setlogjac!!`](@ref).
+"""
+getlogjac(vi::AbstractVarInfo) = getacc(vi, Val(:LogJacobian)).logJ
+
 """
     getloglikelihood(vi::AbstractVarInfo)
 
@@ -196,6 +238,16 @@ See also: [`setloglikelihood!!`](@ref), [`setlogp!!`](@ref), [`getlogprior`](@re
 """
 setlogprior!!(vi::AbstractVarInfo, logp) = setacc!!(vi, LogPriorAccumulator(logp))
 
+"""
+    setlogjac!!(vi::AbstractVarInfo, logJ)
+
+Set the accumulated log-Jacobian term for any linked parameters in `vi`. The
+Jacobian here is taken with respect to the forward (link) transform.
+
+See also: [`getlogjac`](@ref), [`acclogjac!!`](@ref).
+"""
+setlogjac!!(vi::AbstractVarInfo, logJ) = setacc!!(vi, LogJacobianAccumulator(logJ))
+
 """
     setloglikelihood!!(vi::AbstractVarInfo, logp)
 
@@ -215,18 +267,21 @@ Set both the log prior and the log likelihood probabilities in `vi`.
 See also: [`setlogprior!!`](@ref), [`setloglikelihood!!`](@ref), [`getlogp`](@ref).
 """
 function setlogp!!(vi::AbstractVarInfo, logp::NamedTuple{names}) where {names}
-    if !(names == (:logprior, :loglikelihood) || names == (:loglikelihood, :logprior))
-        error("logp must have the fields logprior and loglikelihood and no other fields.")
+    if Set(names) != Set([:logprior, :logjac, :loglikelihood])
+        error(
+            "The second argument to `setlogp!!` must be a NamedTuple with the fields logprior, logjac, and loglikelihood.",
+        )
     end
     vi = setlogprior!!(vi, logp.logprior)
+    vi = setlogjac!!(vi, logp.logjac)
     vi = setloglikelihood!!(vi, logp.loglikelihood)
     return vi
 end
 
 function setlogp!!(vi::AbstractVarInfo, logp::Number)
     return error("""
                  `setlogp!!(vi::AbstractVarInfo, logp::Number)` is no longer supported. Use
-                 `setloglikelihood!!`  and/or `setlogprior!!` instead.
+                 `setloglikelihood!!`, `setlogjac!!`, and/or `setlogprior!!` instead.
                  """)
 end
 
@@ -303,7 +358,18 @@ Add `logp` to the value of the log of the prior probability in `vi`.
 See also: [`accloglikelihood!!`](@ref), [`acclogp!!`](@ref), [`getlogprior`](@ref), [`setlogprior!!`](@ref).
 """
 function acclogprior!!(vi::AbstractVarInfo, logp)
-    return map_accumulator!!(acc -> acc + LogPriorAccumulator(logp), vi, Val(:LogPrior))
+    return map_accumulator!!(acc -> acclogp(acc, logp), vi, Val(:LogPrior))
+end
+
+"""
+    acclogjac!!(vi::AbstractVarInfo, logJ)
+
+Add `logJ` to the value of the log Jacobian in `vi`.
+
+See also: [`getlogjac`](@ref), [`setlogjac!!`](@ref).
+"""
+function acclogjac!!(vi::AbstractVarInfo, logJ)
+    return map_accumulator!!(acc -> acclogp(acc, logJ), vi, Val(:LogJacobian))
 end
 
 """
@@ -314,9 +380,7 @@ Add `logp` to the value of the log of the likelihood in `vi`.
 See also: [`accloglikelihood!!`](@ref), [`acclogp!!`](@ref), [`getloglikelihood`](@ref), [`setloglikelihood!!`](@ref).
 """
 function accloglikelihood!!(vi::AbstractVarInfo, logp)
-    return map_accumulator!!(
-        acc -> acc + LogLikelihoodAccumulator(logp), vi, Val(:LogLikelihood)
-    )
+    return map_accumulator!!(acc -> acclogp(acc, logp), vi, Val(:LogLikelihood))
 end
 
 """
@@ -368,6 +432,9 @@ function resetlogp!!(vi::AbstractVarInfo)
     if hasacc(vi, Val(:LogPrior))
         vi = map_accumulator!!(zero, vi, Val(:LogPrior))
     end
+    if hasacc(vi, Val(:LogJacobian))
+        vi = map_accumulator!!(zero, vi, Val(:LogJacobian))
+    end
     if hasacc(vi, Val(:LogLikelihood))
         vi = map_accumulator!!(zero, vi, Val(:LogLikelihood))
     end
@@ -836,8 +903,11 @@ function link!!(
     x = vi[:]
     y, logjac = with_logabsdet_jacobian(b, x)
 
-    lp_new = getlogprior(vi) - logjac
-    vi_new = setlogprior!!(unflatten(vi, y), lp_new)
+    # Set parameters
+    vi_new = unflatten(vi, y)
+    # Update logjac. We can overwrite any old value since there is only
+    # a single logjac term to worry about.
+    vi_new = setlogjac!!(vi_new, logjac)
     return settrans!!(vi_new, t)
 end
 
@@ -846,10 +916,14 @@ function invlink!!(
 )
     b = t.bijector
     y = vi[:]
-    x, logjac = with_logabsdet_jacobian(b, y)
+    x = b(y)
 
-    lp_new = getlogprior(vi) + logjac
-    vi_new = setlogprior!!(unflatten(vi, x), lp_new)
+    # Set parameters
+    vi_new = unflatten(vi, x)
+    # Reset logjac to 0.
+    if hasacc(vi_new, Val(:LogJacobian))
+        vi_new = map_accumulator!!(zero, vi_new, Val(:LogJacobian))
+    end
     return settrans!!(vi_new, NoTransformation())
 end