-
Notifications
You must be signed in to change notification settings - Fork 1
CSA Supplies
version v01 dated 3/19/22
These items have accumulated over the years, in my toolbag for serving as Control System Advisor (CSA) at FTC tournaments. A goal is to help teams address critical technical issues before reaching the competition field.
Comments, questions or suggestions are welcome at westsiderobotics@verizon.net
handled hex drivers: 5/64", 3/32", 7/64"
Allen keys: 5/64", 3/32", 7/64"
nut driver: 5/16"
combination wrench, short: 5/16"
combination wrench, ratchet box end: 5/16"
handled hex driver: 1.5 mm
Allen key: 1.5 mm
nut driver: 5.5 mm
combination wrench, short: 5.5 mm
combination wrench, ratchet box end: 5.5 mm
handled hex drivers: 3 mm, 2.5 mm
Allen keys: 3 mm, 2.5 mm
nut driver: 7 mm
combination wrench, ratchet box end: 7 mm
Phillips screwdrivers: #0, #1, #2
flat tip screwdriver
mini screwdrivers, 1 set
mini utility cutter
debur tool
diagonal cutters: small, large
scissors, heavy duty
needle nose pliers
flat file, full size
needle files, 1 set
mini hacksaw (blade taped)
chainbreaker: #25, Dark Soul (or REV or VEXPro)
drill bits: 9/64"
tape measure
steel scale, 6-inch
Battery Beak with FTC connectors
multimeter
PowerPole adapter cables: Tamiya F, Tamiya M, XT30 M, XT30 F
fuses, mini: 20 A
wire stripper
PowerPole housings and contacts: 15 A, 30 A
TriCrimp tool
PowerPole insert/removal tool
ferrite cores, assorted
electrical tape
OTG cables: USB-A M to micro M, USB-A M to micro F, USB-A M to mini M, micro M to mini M
USB splitter/hub: micro M to dual USB-A F
5V power bank with USB-A M to USB-C M cable (for Driver Hub boot-up)
servo extension clips
servo tester with batteries
Hitec servo horn screws, stainless steel: M2.6 self-tapping x 8 mm
REV SRS Programmer
Velcro adhesive-backed tape, assorted
foam tape
double-sided tape
stick-tack (poster putty)
extra shop glasses
Band-Aids
zip ties, assorted
digital micrometer
flashlight
USB borescope
shop rag
isopropyl alcohol wipes
3M blue painters tape & black Sharpie
USB thumb drive with adapters to USB-C and USB micro, with APKs and Hub firmware
box of hardware, assorted: #6-32, M3 (need M4)
Comments, questions or suggestions are welcome at westsiderobotics@verizon.net