support programming rp2350

examples/Brain/brain_test/brain_test.ino

@@ -1,7 +1,7 @@
 // Testing basic peripherals on Brain
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_esp_cdc/program_esp_cdc.ino

@@ -9,7 +9,7 @@
 //   - There is no need to connect IO0/Reset since we will use DTR/RTS to reset ESP32
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_esp_uart/program_esp_uart.ino

@@ -6,7 +6,7 @@
 // - Brain TX/RX  <-> ESP32 RX/TX
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_nrf52840/program_nrf52840.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_nrf52840_from_sdcard/program_nrf52840_from_sdcard.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_rp2/program_rp2.ino

@@ -0,0 +1,135 @@
+// This sketch program rp2040 by copying UF2 file from SDCard to
+// rp2040 bootrom
+// Hardware wiring:
+// - Brain's Target GPIO28 to RP2 bootsel
+// - Brain's Target Reset to RP2 Reset
+// - Brain's USB host to RP2040 USB interface
+
+// required for Host MSC block device
+#include "SdFat_Adafruit_Fork.h"
+
+// required for USB host
+#include "pio_usb.h"
+#include "Adafruit_TinyUSB.h"
+
+#include "Adafruit_TestBed_Brains.h"
+
+// firmware.h is converted using tools/file2carray.py e.g
+//   python tools/file2carray.py cdc_msc.uf2
+// above command will generate cdc_msc.uf2.h with bindata, bindata_len
+#include "metro_rp2350_cdc_msc.uf2.h"
+
+// RP2040 Boot VID/PID
+#define BOOT_VID   0x2e8a
+#define BOOT_PID_RP2040   0x0003
+#define BOOT_PID_RP2350   0x000f
+
+// If USB filesystem is mounted
+volatile bool is_usbfs_mounted = false;
+
+//--------------------------------------------------------------------+
+// Setup and Loop on Core0
+//--------------------------------------------------------------------+
+void print_speed(size_t count, uint32_t ms) {
+  Brain.LCD_printf(0, "%.01fKB %.01fs", count/1000.0F, ms / 1000.0F);
+
+  Serial.printf("Completed %u bytes in %.02f seconds.\r\n", count, ms / 1000.0F);
+  Serial.printf("Speed : %.02f KB/s\r\n", (count / 1000.0F) / (ms / 1000.0F));
+}
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) delay(10);
+  Serial.println("Program RP2 by copy UF2 from Internal Flash to Bootloader!");
+
+  // sync: wait for Brain.begin() called in core1 before accessing SD or other peripherals
+  while (!Brain.inited()) delay(10);
+
+  // wait for USB filesystem is mounted. USB host bit-banging and task is
+  // processed on core1
+  while (!is_usbfs_mounted) delay(10);
+
+  // Copy UF2 file
+  Brain.LCD_printf(0, "Copying firmware");
+  Serial.println("Copying UF2 from Flash to USBHFS");
+
+  uint32_t ms = millis();
+  size_t copied_bytes = Brain.rp2_programUF2(bindata, bindata_len);
+  print_speed(copied_bytes, millis() - ms);
+
+  // wait for rp2040 boot rom to reset
+  // while (is_usbfs_mounted) delay(10);
+}
+
+void loop() {
+  Serial.flush();
+}
+
+//--------------------------------------------------------------------+
+// Setup and Loop on Core1
+//--------------------------------------------------------------------+
+
+// call usbh_begin() here to make pio usb background task run on core1
+// NOTE: Brain.begin() should be called here as well to prevent race condition
+void setup1() {
+  Brain.begin();
+  Brain.usbh_begin();
+
+  Brain.LCD_printf(1, "No USB Device");
+
+  // reset rp2040 target into Boot Rom, default bootsel = 28, reset duration = 10 ms
+  Brain.rp2_targetResetBootRom();
+}
+
+// core1's loop: process usb host task on core1
+void loop1() {
+  Brain.USBHost.task();
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Host callbacks
+// Note: running in the same core where Brain.USBHost.task() is called
+//--------------------------------------------------------------------+
+bool is_rp2_bootloader(uint16_t vid, uint16_t pid) {
+  return (vid == BOOT_VID && (pid == BOOT_PID_RP2040 || pid == BOOT_PID_RP2350));
+}
+
+extern "C"  {
+
+// Invoked when device is mounted (configured)
+void tuh_mount_cb(uint8_t dev_addr) {
+  uint16_t vid, pid;
+  tuh_vid_pid_get(dev_addr, &vid, &pid);
+
+  if (!is_rp2_bootloader(vid, pid)) {
+    Brain.LCD_printf(1, "UnkDev %04x:%04x", vid, pid);
+  }
+}
+
+/// Invoked when device is unmounted (bus reset/unplugged)
+void tuh_umount_cb(uint8_t dev_addr) {
+  (void)dev_addr;
+  Brain.LCD_printf(1, "No USB Device");
+}
+
+// Invoked when a device with MassStorage interface is mounted
+void tuh_msc_mount_cb(uint8_t dev_addr) {
+  uint16_t vid, pid;
+  tuh_vid_pid_get(dev_addr, &vid, &pid);
+
+  if (is_rp2_bootloader(vid, pid)) {
+    is_usbfs_mounted = Brain.usbh_mountFS(dev_addr);
+    if (is_usbfs_mounted) {
+      uint16_t rp2variant = (pid == BOOT_PID_RP2040 ? 2040 : 2350);
+      Brain.LCD_printf(1, "RP%u Bootldr", rp2variant);
+    }
+  }
+}
+
+// Invoked when a device with MassStorage interface is unmounted
+void tuh_msc_umount_cb(uint8_t dev_addr) {
+  is_usbfs_mounted = false;
+  Brain.usbh_umountFS(dev_addr);
+}
+
+}

examples/Brain/program_rp2040_uf2/program_rp2040_uf2.ino → examples/Brain/program_rp2_from_sdcard/program_rp2_from_sdcard.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to RP2040 USB interface
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"
@@ -79,7 +79,7 @@ void setup() {
   Serial.println("Copying from SD to USBHFS: " UF2_FILE_PATH);
 
   uint32_t ms = millis();
-  size_t copied_bytes = Brain.rp2040_programUF2(UF2_FILE_PATH);
+  size_t copied_bytes = Brain.rp2_programUF2(UF2_FILE_PATH);
 
   print_speed(copied_bytes, millis() - ms);
 
@@ -104,7 +104,7 @@ void setup1() {
   Brain.LCD_printf(1, "No USB Device");
 
   // reset rp2040 target into Boot Rom, default bootsel = 28, reset duration = 10 ms
-  Brain.rp2040_targetResetBootRom();
+  Brain.rp2_targetResetBootRom();
 }
 
 // core1's loop: process usb host task on core1

examples/Brain/program_samd21/program_samd21.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_samd51/program_samd51.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/program_stm32f405/program_stm32f405.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/read_nrf52840_to_sdcard/read_nrf52840_to_sdcard.ino

@@ -6,7 +6,7 @@
 // - Brain's USB host to Target USB
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/usbh_hub_test/usbh_hub_test.ino

@@ -2,7 +2,7 @@
 // to LCD. Also determine if device support MSC or HID
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/Brain/usbh_test/usbh_test.ino

@@ -2,7 +2,7 @@
 // to LCD. Also determine if device support MSC or HID
 
 // required for Host MSC block device
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // required for USB host
 #include "pio_usb.h"

examples/program_esp32_uart_from_sdcard/program_esp32_uart_from_sdcard.ino

@@ -20,7 +20,7 @@
  * from https://github.com/adafruit/nina-fw/releases/tag/1.7.5 in this example directory.
  */
 
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // #include "Adafruit_TinyUSB.h"
 #include "Adafruit_TestBed.h"

src/Adafruit_TestBed.h

@@ -6,7 +6,7 @@
 #include "Wire.h"
 
 #include "ESP32BootROM.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 #define RED 0xFF0000
 #define YELLOW 0xFFFF00

src/Adafruit_TestBed_Brains.cpp

@@ -24,7 +24,7 @@
 
 #ifdef ARDUINO_RASPBERRY_PI_PICO
 
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "pio_usb.h"
 
 #include "Adafruit_DAP.h"
@@ -133,8 +133,8 @@ bool Adafruit_TestBed_Brains::inited(void) { return _inited; }
 // RP2040 Target
 //--------------------------------------------------------------------+
 
-void Adafruit_TestBed_Brains::rp2040_targetResetBootRom(int bootsel_pin,
-                                                        uint32_t reset_ms) {
+void Adafruit_TestBed_Brains::rp2_targetResetBootRom(int bootsel_pin,
+                                                     uint32_t reset_ms) {
   pinMode(bootsel_pin, OUTPUT);
   digitalWrite(bootsel_pin, LOW);
 
@@ -146,15 +146,48 @@ void Adafruit_TestBed_Brains::rp2040_targetResetBootRom(int bootsel_pin,
   pinMode(bootsel_pin, INPUT);
 }
 
-size_t Adafruit_TestBed_Brains::rp2040_programUF2(const char *fpath) {
+size_t Adafruit_TestBed_Brains::rp2_programUF2(const uint8_t *buffer,
+                                               size_t bufsize) {
+  size_t copied_bytes = 0;
+  const char *dst_name = "FIRMWARE.UF2";
+  File32 fdst = USBH_FS.open(dst_name, O_WRONLY | O_CREAT);
+
+  if (!fdst) {
+    Serial.printf("USBH_FS: cannot create file: %s\r\n", dst_name);
+  } else {
+    while (copied_bytes < bufsize) {
+      size_t count = bufsize - copied_bytes;
+      if (count > 4096) {
+        count = 4096; // write 1 sector each
+      }
+
+      setLED(HIGH);
+      size_t wr_count = fdst.write(buffer, count);
+      setLED(LOW);
+
+      buffer += wr_count;
+      copied_bytes += wr_count;
+
+      if (wr_count != count) {
+        Serial.println("USBH_FS: Failed to write file");
+        break;
+      }
+    }
+  }
+
+  fdst.close();
+
+  return copied_bytes;
+}
+
+size_t Adafruit_TestBed_Brains::rp2_programUF2(const char *fpath) {
   File32 fsrc = SD.open(fpath);
   if (!fsrc) {
     Serial.printf("SD: cannot open file: %s\r\n", fpath);
     return 0;
   }
 
   size_t copied_bytes = 0;
-
   const char *dst_name = "FIRMWARE.UF2";
   File32 fdst = USBH_FS.open(dst_name, O_WRONLY | O_CREAT);
 

src/Adafruit_TestBed_Brains.h

@@ -3,7 +3,7 @@
 
 #ifdef ARDUINO_RASPBERRY_PI_PICO
 
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 #include "Adafruit_TestBed.h"
 #include <LiquidCrystal.h>
@@ -49,15 +49,25 @@ class Adafruit_TestBed_Brains : public Adafruit_TestBed {
   bool usbh_mountFS(uint8_t dev_addr);
   bool usbh_umountFS(uint8_t dev_addr);
 
+  //--------------------------------------------------------------------+1
+  // RP2 (rp2040 and rp2350) Target
   //--------------------------------------------------------------------+
-  // RP2040 Target
-  //--------------------------------------------------------------------+
-  // reset rp2040 target to Boot ROM
-  void rp2040_targetResetBootRom(int bootsel_pin = 28, uint32_t reset_ms = 20);
+  // reset rp2 target to Boot ROM
+  void rp2_targetResetBootRom(int bootsel_pin = 28, uint32_t reset_ms = 20);
+
+  // program rp2 target by copying UF2 file stored in flash
+  size_t rp2_programUF2(const uint8_t *buffer, size_t bufsize);
 
-  // program rp2040 target by copying UF2 file from SDCard
+  // program rp2 target by copying UF2 file from SDCard
   // return number of copied bytes (typically uf2 file size)
-  size_t rp2040_programUF2(const char *fpath);
+  size_t rp2_programUF2(const char *fpath);
+
+  // backward compatibility
+  void rp2040_targetResetBootRom(int bootsel_pin = 28, uint32_t reset_ms = 20) {
+    rp2_targetResetBootRom(bootsel_pin, reset_ms);
+  }
+
+  size_t rp2040_programUF2(const char *fpath) { return rp2_programUF2(fpath); }
 
   //--------------------------------------------------------------------+
   // DAP (samd21/51, nrf5x, stm32f4 etc..) Target