Add SH1107 for 128x64/32 OLED featherwings

.github/workflows/build-clang-doxy.yml

@@ -5,6 +5,11 @@ name: WipperSnapper Build CI
 
 on:
   workflow_dispatch:
+    inputs:
+      board:
+        description: 'Build ONLY this board (must match a matrix entry exactly, or leave empty for all)'
+        required: false
+        default: ''
   pull_request:
   workflow_call:
     secrets:
@@ -15,13 +20,21 @@ jobs:
   build-esp32sx-esptool:
     name: 🏗️ESP32-Sx(lvgl)
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
         arduino-platform: ["funhouse_noota"]
         include:
           - offset: "0x1000"
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -174,6 +187,7 @@ jobs:
   build-esp32sx:
     name: 🏗️ESP32-Sx
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
@@ -194,6 +208,13 @@ jobs:
             "qtpy_esp32s3_n4r2",
           ]
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -278,6 +299,7 @@ jobs:
   build-esp32:
     name: 🏗️ESP32/Cx
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
@@ -299,6 +321,13 @@ jobs:
           - offset: "0x0"
             arduino-platform: "wippersnapper_feather_esp32c6"
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -419,6 +448,7 @@ jobs:
   build-samd:
     name: 🏗️SAMD
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
@@ -429,6 +459,13 @@ jobs:
             "metro_m4_airliftlite_tinyusb",
           ]
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -498,11 +535,19 @@ jobs:
   build-rp2040:
     name: 🏗️RP2040
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
         arduino-platform: ["picow_rp2040_tinyusb", "picow_rp2350_tinyusb"]
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -569,11 +614,19 @@ jobs:
   build-esp8266:
     name: 🏗️ESP8266
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
         arduino-platform: ["feather_esp8266"]
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -647,6 +700,7 @@ jobs:
   build-esp32sx-dev:
     name: 🏗️ESP32-Sx(DEV)
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
@@ -662,6 +716,13 @@ jobs:
             "metro_esp32s3_debug",
           ]
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"
@@ -746,6 +807,7 @@ jobs:
   build-esp32-dev:
     name: 🏗️ESP32/Cx(DEV)
     runs-on: ubuntu-latest
+    continue-on-error: true
     strategy:
       fail-fast: false
       matrix:
@@ -758,6 +820,13 @@ jobs:
           - offset: "0x0"
             arduino-platform: "wippersnapper_feather_esp32c6_debug"
     steps:
+      - name: "skip if unwanted"
+        if: |
+          github.event_name == 'workflow_dispatch' &&
+          github.event.inputs.board != '' &&
+          matrix.arduino-platform != github.event.inputs.board
+        run: |
+          echo "don't build this one!"; exit 1
       - uses: actions/setup-python@v5
         with:
           python-version: "3.x"

library.properties

@@ -1,10 +1,10 @@
 name=Adafruit WipperSnapper
-version=1.0.0-beta.103
+version=1.0.0-beta.104
 author=Adafruit
 maintainer=Adafruit <[email protected]>
 sentence=Arduino application for Adafruit.io WipperSnapper
 paragraph=Arduino application for Adafruit.io WipperSnapper
 category=Communication
 url=https://github.com/adafruit/Adafruit_Wippersnapper_Arduino
 architectures=*
-depends=SdFat - Adafruit Fork, Adafruit NeoPixel, Adafruit SPIFlash, ArduinoJson, Adafruit DotStar, Adafruit HDC302x, Adafruit INA219, Adafruit INA260 Library, Adafruit LTR329 and LTR303, Adafruit LTR390 Library, Adafruit MCP3421, Adafruit NAU7802 Library, Adafruit SleepyDog Library, Adafruit TMP117, Adafruit TinyUSB Library, Adafruit AHTX0, Adafruit BME280 Library, Adafruit BMP280 Library, Adafruit BMP3XX Library, Adafruit DPS310, Adafruit DS248x, Adafruit SCD30, Adafruit SGP30 Sensor, Adafruit SGP40 Sensor, Sensirion I2C SCD4x, Sensirion I2C SEN5X, Sensirion I2C SEN66, arduino-sht, Adafruit Si7021 Library, Adafruit MQTT Library, Adafruit MS8607, Adafruit MCP9808 Library, Adafruit MCP9600 Library, Adafruit MPL115A2, Adafruit MPRLS Library, Adafruit TSL2591 Library, Adafruit_VL53L0X, Adafruit VL53L1X, STM32duino VL53L4CD, STM32duino VL53L4CX, Adafruit_VL6180X, Adafruit PM25 AQI Sensor, Adafruit VCNL4020 Library, Adafruit VCNL4040, Adafruit VCNL4200 Library, Adafruit VEML7700 Library, Adafruit LC709203F, Adafruit LPS2X, Adafruit LPS28, Adafruit LPS35HW, Adafruit seesaw Library, Adafruit BME680 Library, Adafruit MAX1704X, Adafruit ADT7410 Library, Adafruit HTS221, Adafruit HTU21DF Library, Adafruit HTU31D Library, Adafruit PCT2075, hp_BH1750, ENS160 - Adafruit Fork, Adafruit BusIO, Adafruit Unified Sensor, Sensirion Core, Adafruit GFX Library, Adafruit LED Backpack Library, Adafruit LiquidCrystal, Adafruit SSD1306
+depends=SdFat - Adafruit Fork, Adafruit NeoPixel, Adafruit SPIFlash, ArduinoJson, Adafruit DotStar, Adafruit HDC302x, Adafruit INA219, Adafruit INA260 Library, Adafruit LTR329 and LTR303, Adafruit LTR390 Library, Adafruit MCP3421, Adafruit NAU7802 Library, Adafruit SleepyDog Library, Adafruit TMP117, Adafruit TinyUSB Library, Adafruit AHTX0, Adafruit BME280 Library, Adafruit BMP280 Library, Adafruit BMP3XX Library, Adafruit DPS310, Adafruit DS248x, Adafruit SCD30, Adafruit SGP30 Sensor, Adafruit SGP40 Sensor, Sensirion I2C SCD4x, Sensirion I2C SEN5X, Sensirion I2C SEN66, arduino-sht, Adafruit Si7021 Library, Adafruit MQTT Library, Adafruit MS8607, Adafruit MCP9808 Library, Adafruit MCP9600 Library, Adafruit MPL115A2, Adafruit MPRLS Library, Adafruit TSL2591 Library, Adafruit_VL53L0X, Adafruit VL53L1X, STM32duino VL53L4CD, STM32duino VL53L4CX, Adafruit_VL6180X, Adafruit PM25 AQI Sensor, Adafruit VCNL4020 Library, Adafruit VCNL4040, Adafruit VCNL4200 Library, Adafruit VEML7700 Library, Adafruit LC709203F, Adafruit LPS2X, Adafruit LPS28, Adafruit LPS35HW, Adafruit seesaw Library, Adafruit BME680 Library, Adafruit MAX1704X, Adafruit ADT7410 Library, Adafruit HTS221, Adafruit HTU21DF Library, Adafruit HTU31D Library, Adafruit PCT2075, hp_BH1750, ENS160 - Adafruit Fork, Adafruit BusIO, Adafruit Unified Sensor, Sensirion Core, Adafruit GFX Library, Adafruit LED Backpack Library, Adafruit LiquidCrystal, Adafruit SH110X, Adafruit SSD1306

platformio.ini

@@ -84,6 +84,7 @@ lib_deps =
     adafruit/Adafruit LiquidCrystal
     adafruit/Adafruit LED Backpack Library
     adafruit/Adafruit PM25 AQI Sensor
+    adafruit/Adafruit SH110X
     adafruit/Adafruit SSD1306
     https://github.com/pstolarz/OneWireNg.git
     https://github.com/milesburton/Arduino-Temperature-Control-Library.git

src/Wippersnapper.h

@@ -142,7 +142,7 @@
 #endif
 
 #define WS_VERSION                                                             \
-  "1.0.0-beta.103" ///< WipperSnapper app. version (semver-formatted)
+  "1.0.0-beta.104" ///< WipperSnapper app. version (semver-formatted)
 
 // Reserved Adafruit IO MQTT topics
 #define TOPIC_IO_THROTTLE "/throttle" ///< Adafruit IO Throttle MQTT Topic

src/components/i2c/WipperSnapper_I2C.cpp

@@ -881,7 +881,38 @@ bool WipperSnapper_Component_I2C::initI2CDevice(
     }
     _drivers_out.push_back(_sevenSeg);
     WS_DEBUG_PRINTLN("7-Segement LED Matrix Initialized Successfully!");
-  } else if (strcmp("oled128x32default", msgDeviceInitReq->i2c_device_name) ==
+  } else if (strcmp("fthrwingoled128x64", msgDeviceInitReq->i2c_device_name) ==
+                 0 ||
+             strcmp("fthrwingoled128x64lg",
+                    msgDeviceInitReq->i2c_device_name) == 0) {
+    WS_DEBUG_PRINTLN("SH1107 display detected!");
+    _sh1107 = new WipperSnapper_I2C_Driver_Out_SH1107(this->_i2c, i2cAddress);
+    WS_DEBUG_PRINTLN("Configuring SH1107 display...");
+    _sh1107->ConfigureSH1107(
+        (uint8_t)msgDeviceInitReq->i2c_output_add.config.ssd1306_config.width,
+        (uint8_t)msgDeviceInitReq->i2c_output_add.config.ssd1306_config.height,
+        (uint8_t)
+            msgDeviceInitReq->i2c_output_add.config.ssd1306_config.text_size,
+        OLED_128X64_WING_ROTATION_90); // fixed as currently the only screen is
+    // 128x64wing (needs a rotation of 1 / 90degrees and constructor w/h swap).
+    if (!_sh1107->begin()) {
+      WS_DEBUG_PRINTLN("ERROR: Failed to initialize sh1107!");
+      _busStatusResponse =
+          wippersnapper_i2c_v1_BusResponse_BUS_RESPONSE_DEVICE_INIT_FAIL;
+      return false;
+    }
+    WS_DEBUG_PRINTLN("SH1107 display configured successfully!");
+    _drivers_out.push_back(_sh1107);
+    WS_DEBUG_PRINTLN("SH1107 display initialized Successfully!");
+  } else if (strcmp("oled32x64large", msgDeviceInitReq->i2c_device_name) == 0 ||
+             strcmp("oled64x32default", msgDeviceInitReq->i2c_device_name) ==
+                 0 ||
+             strcmp("oled64x32large", msgDeviceInitReq->i2c_device_name) == 0 ||
+             strcmp("fthrwingoled128x32", msgDeviceInitReq->i2c_device_name) ==
+                 0 ||
+             strcmp("fthrwingoled128x32lg",
+                    msgDeviceInitReq->i2c_device_name) == 0 ||
+             strcmp("oled128x32default", msgDeviceInitReq->i2c_device_name) ==
                  0 ||
              strcmp("oled128x32large", msgDeviceInitReq->i2c_device_name) ==
                  0 ||

src/components/i2c/WipperSnapper_I2C.h

@@ -54,6 +54,7 @@
 #include "drivers/WipperSnapper_I2C_Driver_Out_7Seg.h"
 #include "drivers/WipperSnapper_I2C_Driver_Out_CharLcd.h"
 #include "drivers/WipperSnapper_I2C_Driver_Out_QuadAlphaNum.h"
+#include "drivers/WipperSnapper_I2C_Driver_Out_Sh1107.h"
 #include "drivers/WipperSnapper_I2C_Driver_Out_Ssd1306.h"
 #include "drivers/WipperSnapper_I2C_Driver_PCT2075.h"
 #include "drivers/WipperSnapper_I2C_Driver_PM25.h"
@@ -204,6 +205,7 @@ class WipperSnapper_Component_I2C {
   WipperSnapper_I2C_Driver_Out_QuadAlphaNum *_quadAlphaNum = nullptr;
   WipperSnapper_I2C_Driver_Out_CharLcd *_charLcd = nullptr;
   WipperSnapper_I2C_Driver_Out_7Seg *_sevenSeg = nullptr;
+  WipperSnapper_I2C_Driver_Out_SH1107 *_sh1107 = nullptr;
   WipperSnapper_I2C_Driver_Out_Ssd1306 *_ssd1306 = nullptr;
 };
 extern Wippersnapper WS;

src/components/i2c/drivers/WipperSnapper_I2C_Driver_Out.h

@@ -62,9 +62,11 @@ class WipperSnapper_I2C_Driver_Out : public WipperSnapper_I2C_Driver {
                   The height of the display in pixels.
       @param    text_size
                   The display's text size.
+      @param    rotation
+                  The rotation of the display in degrees, default is 0.
   */
   virtual void ConfigureSSD1306(uint8_t width, uint8_t height,
-                                uint8_t text_size) {
+                                uint8_t text_size, uint8_t rotation = 0) {
     // noop
   }