remove unused macros

BLE_STACK_SUPPORT_REQD, SWI_DISABLE0, FLOAT_ABI_HARD

Author: hathach

Makefile

@@ -232,10 +232,7 @@ CFLAGS += -fno-builtin --short-enums -fstack-usage
 CFLAGS += -D__HEAP_SIZE=0
 CFLAGS += -DCONFIG_GPIO_AS_PINRESET
 CFLAGS += -DCONFIG_NFCT_PINS_AS_GPIOS
-CFLAGS += -DBLE_STACK_SUPPORT_REQD
-CFLAGS += -DSWI_DISABLE0
 CFLAGS += -DSOFTDEVICE_PRESENT
-CFLAGS += -DFLOAT_ABI_HARD
 CFLAGS += -DDFU_APP_DATA_RESERVED=7*4096
 CFLAGS += $(MCU_FLAGS)
 
@@ -269,10 +266,7 @@ LDFLAGS += --specs=nano.specs -lc -lnosys
 #******************************************************************************
 ASMFLAGS += -x assembler-with-cpp
 ASMFLAGS += -D__HEAP_SIZE=0
-ASMFLAGS += -DBLE_STACK_SUPPORT_REQD
-ASMFLAGS += -DSWI_DISABLE0
 ASMFLAGS += -DSOFTDEVICE_PRESENT
-ASMFLAGS += -DFLOAT_ABI_HARD
 ASMFLAGS += $(MCU_FLAGS)
 
 

segger/Adafruit_nRF52_Bootloader.emProject

@@ -19,7 +19,7 @@
       arm_target_device_name="nRF52840_xxAA"
       arm_target_interface_type="SWD"
       build_treat_warnings_as_errors="Yes"
-      c_preprocessor_definitions="__nRF_FAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;NO_VTOR_CONFIG;MK_BOOTLOADER_VERSION=0x00020A;CONFIG_GPIO_AS_PINRESET;CONFIG_NFCT_PINS_AS_GPIOS;BLE_STACK_SUPPORT_REQD;SWI_DISABLE0;SOFTDEVICE_PRESENT;FLOAT_ABI_HARD;CFG_TUSB_DEBUG=2;UF2_VERSION="Segger";BLEDIS_FW_VERSION="Segger""
+      c_preprocessor_definitions="__nRF_FAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;NO_VTOR_CONFIG;MK_BOOTLOADER_VERSION=0x00020A;CONFIG_GPIO_AS_PINRESET;CONFIG_NFCT_PINS_AS_GPIOS;SOFTDEVICE_PRESENT;CFG_TUSB_DEBUG=2;UF2_VERSION="Segger";BLEDIS_FW_VERSION="Segger""
       c_user_include_directories=".;../src/;../src/usb;../src/boards;../src/cmsis/include;$(tusbDir);$(nrfxDir);$(nrfxDir)/mdk;$(nrfxDir)/hal;$(nrfxDir)/drivers/include;$(nrfxDir)/drivers/src;$(sdDir)/include;$(sdDir)/include/nrf52;$(sdk11Dir)/drivers_nrf/pstorage;$(sdk11Dir)/ble/common/;$(sdk11Dir)/ble/ble_services/ble_dfu;$(sdk11Dir)/ble/ble_services/ble_dis;$(sdk11Dir)/libraries/bootloader_dfu;$(sdk11Dir)/libraries/bootloader_dfu/hci_transport;$(sdk11Dir)/libraries/util;$(sdkDir)/toolchain/cmsis/include;$(sdkDir)/device;$(sdkDir)/toolchain;$(sdkDir)/drivers_nrf/hal;$(sdkDir)/drivers_nrf/systick;$(sdkDir)/drivers_nrf/uart;$(sdkDir)/drivers_nrf/usbd;$(sdkDir)/drivers_nrf/common;$(sdkDir)/drivers_nrf/delay;$(sdkDir)/drivers_nrf/power;$(sdkDir)/drivers_nrf/clock;$(sdkDir)/libraries/util;$(sdkDir)/libraries/timer;$(sdkDir)/libraries/scheduler;$(sdkDir)/libraries/crc16;$(sdkDir)/libraries/util;$(sdkDir)/libraries/hci/config;$(sdkDir)/libraries/uart;$(sdkDir)/libraries/hci;$(sdkDir)/external/fprintf;$(sdkDir)/libraries/strerror;$(sdkDir)/libraries/atomic;$(sdkDir)/libraries/balloc;$(sdkDir)/libraries/experimental_log/src;$(sdkDir)/libraries/experimental_log;$(sdkDir)/libraries/experimental_section_vars;$(sdkDir)/libraries/experimental_memobj"
       debug_register_definition_file="$(ProjectDir)/nrf52840_Registers.xml"
       debug_target_connection="J-Link"