adafruit · dhalbert · May 16, 2025 · May 15, 2025 · May 16, 2025
diff --git a/_blinka/adafruit_feather_rp2040.md b/_blinka/adafruit_feather_rp2040.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_feather_rp2040"
-title: "Feather RP2040 Download"
-name: "Feather RP2040"
+title: "Feather RP2040 via U2IF Download"
+name: "Feather RP2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/4884"
@@ -15,6 +15,8 @@ features:
   - STEMMA QT/QWIIC
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather Treatment" and so we did! This Feather features the **RP2040**, and all niceties you know and love about Feather.
 
 ## Technical details

diff --git a/_blinka/adafruit_feather_rp2040_can.md b/_blinka/adafruit_feather_rp2040_can.md
@@ -1,12 +1,13 @@
 ---
 layout: download
 board_id: "adafruit_feather_rp2040_can"
-title: "Feather RP2040 CAN Bus Download"
-name: "Feather RP2040 CAN Bus"
+title: "Feather RP2040 CAN Bus via U2IF Download"
+name: "Feather RP2040 CAN Bus via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5724"
 board_image: "adafruit_feather_rp2040_can.jpg"
+download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-any-computer-with-raspberry-pi-pico"
 blinka: true
 date_added: 2023-05-02
 tags:
@@ -17,6 +18,8 @@ features:
   - STEMMA QT/QWIIC
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 If you'd like quickly get started with CAN bus interfacing, with no soldering required, our **Adafruit RP2040 CAN Bus Feather** comes ready-to-rock with a microcontroller, CAN chipset and terminal blocks for instant gratification. [The controller used is the MCP26525 (aka a MCP2515 with built-in transciever), an extremely popular and well-supported chipset](https://www.microchip.com/en-us/product/MCP2515) that has drivers in Arduino and [CircuitPython](https://github.com/adafruit/Adafruit_CircuitPython_MCP2515) and only requires an SPI port and two pins for chip-select and IRQ. Use it to send and receive messages in either standard or extended format at up to 1 Mbps.
 
 Feather is the development board specification from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. [We have other boards in the Feather family, check'em out here](https://www.adafruit.com/feather).

diff --git a/_blinka/adafruit_feather_rp2040_rfm.md b/_blinka/adafruit_feather_rp2040_rfm.md
@@ -1,18 +1,22 @@
 ---
 layout: download
 board_id: "adafruit_feather_rp2040_rfm"
-title: "Feather RP2040 RFM9x Board Download"
-name: "Feather RP2040 RFM9x"
+title: "Feather RP2040 RFM9x Board via U2IF Download"
+name: "Feather RP2040 RFM9x via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5714"
+download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-any-computer-with-raspberry-pi-pico"
 board_image: "adafruit_feather_rp2040_rfm9x.jpg"
 blinka: true
 date_added: 2023-04-04
 features:
   - Feather-Compatible
   - STEMMA QT/QWIIC
 ---
+
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 This is the Adafruit Feather RP2040 RFM9x. We call these RadioFruits, our take on a microcontroller with packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
 
 Feather is the development board specification from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. We have other boards in the Feather family, check'em out here.

diff --git a/_blinka/adafruit_feather_rp2040_rfm69.md b/_blinka/adafruit_feather_rp2040_rfm69.md
@@ -1,18 +1,22 @@
 ---
 layout: download
 board_id: "adafruit_feather_rp2040_rfm"
-title: "Feather RP2040 RFM69 Board Download"
-name: "Feather RP2040 RFM69"
+title: "Feather RP2040 RFM69 Board via U2IF Download"
+name: "Feather RP2040 RFM69 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5712"
+download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-any-computer-with-raspberry-pi-pico"
 board_image: "adafruit_feather_rp2040_rfm69.jpg"
 blinka: true
 date_added: 2023-04-04
 features:
   - Feather-Compatible
   - STEMMA QT/QWIIC
 ---
+
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 This is the Adafruit Feather RP2040 RFM69. We call these RadioFruits, our take on a microcontroller with packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
 
 Feather is the development board specification from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. We have other boards in the Feather family, check'em out here.

diff --git a/_blinka/adafruit_feather_rp2040_thinkink.md b/_blinka/adafruit_feather_rp2040_thinkink.md
@@ -1,12 +1,13 @@
 ---
 layout: download
 board_id: "adafruit_feather_rp2040_thinkink"
-title: "Feather RP2040 ThinkInk Download"
-name: "Feather RP2040 ThinkInk"
+title: "Feather RP2040 ThinkInk via U2IF Download"
+name: "Feather RP2040 ThinkInk via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5727"
 board_image: "adafruit_feather_rp2040_thinkink.jpg"
+download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-any-computer-with-raspberry-pi-pico"
 blinka: true
 date_added: 2023-05-02
 tags:
@@ -17,6 +18,8 @@ features:
   - STEMMA QT/QWIIC
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 Easy e-paper and RP2040 finally come to your Feather with this Adafruit RP2040 Feather Think Ink that's designed to make it a breeze to add almost any common e-Ink/e-Paper display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
 
 We've liked these displays for a long time, and we've got Arduino/CircuitPython drivers for tons of the various display chipsets, so wouldn't an e-paper RP2040 Feather make a ton of sense? Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This Feather will add all the power supply support circuitry and level shifting so you can attach your favorite display - we've tested it with up to 5.6" sized 7-color ACeP displays.

diff --git a/_blinka/adafruit_itsybitsy_rp2040.md b/_blinka/adafruit_itsybitsy_rp2040.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_itsybitsy_rp2040"
-title: "ItsyBitsy RP2040 Download"
-name: "ItsyBitsy RP2040"
+title: "ItsyBitsy RP2040 via U2IF Download"
+name: "ItsyBitsy RP2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/4888"
@@ -11,9 +11,10 @@ download_instructions: "https://learn.adafruit.com/circuitpython-libraries-on-an
 blinka: true
 date_added: 2021-12-06
 features:
-
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 A new chip means a new ItsyBitsy, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the ItsyBitsy teensy-weensy Treatment" and so we did! This Itsy' features the RP2040, and all niceties you know and love about the [ItsyBitsy family](https://www.adafruit.com/category/1008).
 
 What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy RP2040 featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast duel Cortex M0+ processor running at 125 MHz - this microcontroller board is perfect when you want something very compact, with lots of horsepower and a bunch of pins. This Itsy has sports car speed, but SUV roominess with 4 MB of FLASH and 264 KB of SRAM.

diff --git a/_blinka/adafruit_kb2040.md b/_blinka/adafruit_kb2040.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_kb2040"
-title: "Adafruit KB2040 Download"
-name: "Adafruit KB2040"
+title: "Adafruit KB2040 via U2IF Download"
+name: "Adafruit KB2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5302"
@@ -15,6 +15,8 @@ features:
 
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 A wild Kee Boar appears! It’s a shiny **KB2040**! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit parts for their Keeb builds – but with the ItsyBitsy not being pin-compatible with the Pro Micro pinout, it really wasn't very easy without some sort of adapter plate.
 
 Now we’re seeing lots of people use CircuitPython for keebs, which is awesome! So why not try our hands at spinning up a pro-micro-compatible RP2040 board? The RP2040 is plenty powerful, low-cost, and makes for an excellent keeb driver chip.

diff --git a/_blinka/adafruit_macropad_rp2040.md b/_blinka/adafruit_macropad_rp2040.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_macropad_rp2040"
-title: "MacroPad RP2040 Download"
-name: "MacroPad RP2040"
+title: "MacroPad RP2040 via U2IF Download"
+name: "MacroPad RP2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5128"
@@ -14,6 +14,8 @@ features:
   - STEMMA QT/QWIIC
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here, stands for Microcontroller because this 3x4 keyboard controller features the newest technology from the Raspberry Pi sector: say hello to the RP2040. It's speedy little microcontroller with lots of GPIO pins and a 64 times more RAM than the Apollo Guidance Computer. We added 8 MB of flash memory for plenty of storage.
 
 Get ready to upgrade your desk's mission control station with a CircuitPython or Arduino powered Macropad - complete with 12 buttons, OLED display, speaker and rotary encoder. Customize it for your spacecraft to help guide you through the great reaches of the unknown. (Or just have it type out your favorite emojis.)

diff --git a/_blinka/adafruit_qt2040_trinkey.md b/_blinka/adafruit_qt2040_trinkey.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_qt2040_trinkey"
-title: "Trinkey QT2040 Download"
-name: "Trinkey QT2040"
+title: "Trinkey QT2040 via U2IF Download"
+name: "Trinkey QT2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/5056"
@@ -15,6 +15,8 @@ features:
 
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 It's half USB Key, half Adafruit QT Py, and a lotta RP2040*...*it's **Trinkey QT2040**, the circuit board with an RP2040 heart and Stemma QT legs. Folks are loving the [QT Py 2040](https://www.adafruit.com/product/4900) we made, but maybe you want something plug-and-play. So we thought, hey what if we made something like that plugs right into your computer's USB port? And this is what we came up with!
 
 The PCB is designed to slip into any USB A port on a computer or laptop. There's an RP2040 microcontroller on board with just enough circuitry to keep it happy. There's an RGB NeoPixel, a reset and bootloader or user button and a STEMMA QT Port on the end. That's it!

diff --git a/_blinka/adafruit_qtpy_rp2040.md b/_blinka/adafruit_qtpy_rp2040.md
@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "adafruit_qtpy_rp2040"
-title: "QT Py RP2040 Download"
-name: "QT Py RP2040"
+title: "QT Py RP2040 via U2IF Download"
+name: "QT Py RP2040 via U2IF"
 manufacturer: "Adafruit"
 board_url:
  - "https://www.adafruit.com/product/4900"
@@ -14,6 +14,8 @@ features:
   - STEMMA QT/QWIIC
 ---
 
+**This board uses the U2IF firmware to communicate with Blinka and is run on the attached system via USB. See the Installation Instructions for more info.**
+
 What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new [Raspberry Pi Pico](https://www.adafruit.com/pico) *and* our [Feather RP2040](http://www.adafruit.com/product/4884) and [ItsyBitsy RP2040](http://www.adafruit.com/product/4888), but what if we wanted something really *smol?*
 
 A new chip means a new QT Py, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the cuuutie QT Py Treatment", and so we did! This QT Py features the RP2040, [and all niceties you know and love about the original QT Py](https://www.adafruit.com/category/4600)

diff --git a/_blinka/banana_pi_bpi_ai2h_ai2n.md b/_blinka/banana_pi_bpi_ai2h_ai2n.md
@@ -0,0 +1,31 @@
+---
+layout: download
+board_id: "banana_pi_bpi_ai2h_ai2n"
+title: "Banana Pi BPI-AI2H with BPI-AI2N Carrier Download"
+name: "Banana Pi BPI-AI2H with BPI-AI2N Carrier"
+manufacturer: "SinoVoip"
+board_url:
+ - "https://docs.banana-pi.org/en/BPI-AI2N/BananaPi_BPI-AI2N"
+board_image: "banana_pi_bpi_ai2h_ai2n.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2025-05-15
+features:
+  - Wi-Fi
+  - Bluetooth/BLE
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+---
+
+Banana Pi BPI-AI2N System-on-Module (SoM) and BPI-AI2N carrier board are open-source hardware solutions designed to leverage the advanced capabilities of the RZ/V2N Vision AI MPU. Designed with a flexible, community-driven ecosystem, the BPI-AI2N platform empowers developers to accelerate innovation and streamline application development. Powered by the RZ/V2N MPU, it delivers industry-leading AI acceleration of 15 TOPS (Sparse) and high-performance computing with 4x Arm® Cortex®-A55 processors, making it an ideal choice for creating cutting-edge vision AI solutions.
+
+- Small Form Factor: Compact SO-DIMM 260PINs design (SOM module size: 45x69.6mm)
+- Open-source development kit, including SOM, BPI-AI2N Carrier board and a rich ecosystem of tools and support from the Banana Pi developer community
+- Customizable hardware & software by OEM&ODM
+- Yocto and other open-source software support
+- Memory & storage: 8GB LPDDR4x, 32GB eMMC, 64MB QSPI Flash
+- Wide operating temperature range from -40°C to 85°C
+
+## Purchase
+* [Alibaba](https://www.alibaba.com/product-detail/Banana-PI-NEW-Powerful-SOM-Module_1601401058111.html)
diff --git a/_blinka/banana_pi_bpi_f3.md b/_blinka/banana_pi_bpi_f3.md
@@ -0,0 +1,33 @@
+---
+layout: download
+board_id: "banana_pi_bpi_f3"
+title: "Banana Pi BPI-F3 Download"
+name: "Banana Pi BPI-F3"
+manufacturer: "SinoVoip"
+board_url:
+ - "https://wiki.banana-pi.org/Banana_Pi_BPI-F3"
+board_image: "banana_pi_bpi_f3.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2024-09-05
+features:
+  - Wi-Fi
+  - Bluetooth/BLE
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+---
+
+Banana Pi BPI-F3 is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power. 2/4/8/16G DDR and 8/16/32/128G eMMC onboard.2x GbE Ethernet prot, 4x USB 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
+
+- 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power
+- Single-core general computing power equivalent to 1.3 times Cortex-A55
+- Supports 32-bit LPDDR4/4X, with a maximum of 16GB of memory
+- 4K decoding and encoding
+- 5-lane PCIE2.1 expansion capability
+- 1x USB 3.0 + 2x USB 2.0 interfaces
+- 12x UART serial ports
+- Operating temperature range: -40°C to 85°C
+
+## Purchase
+* [Amazon](https://amzn.to/4j8CMn0)
diff --git a/_blinka/banana_pi_bpi_f5.md b/_blinka/banana_pi_bpi_f5.md
@@ -0,0 +1,37 @@
+---
+layout: download
+board_id: "banana_pi_bpi_f5"
+title: "Banana Pi BPI-F5 Download"
+name: "Banana Pi BPI-F5"
+manufacturer: "SinoVoip"
+board_url:
+ - "https://wiki.banana-pi.org/Banana_Pi_BPI-F5"
+board_image: "banana_pi_bpi_f5.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2025-05-05
+features:
+  - Wi-Fi
+  - Bluetooth/BLE
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+---
+
+Banana Pi BPI-F5 design with Allwinner Octa-core ARM Cortex-A55 T527 chip design.have a RISC-V CPU, up to 200 MHz,HiFi4 Audio DSP,ARM G57 MC1 GPU,Up to 2 TOPS NPU, support 2/4G RAM and 8-32G eMMC.
+
+Allwinner T527 Octa-core A55, NPU up to 2Tops for edge intelligent AI applications.
+
+T527 series is a high-performance embedded processor with optional AI function in the field of intelligent industrial control and automotive. It is suitable for embedded devices with media and AI functions such as high-performance industrial robots, display and control all-in-one machines, edge intelligent boxes and vehicle terminals.
+
+T527 is used in commercial display/cash register, cloud computer, robot, industrial intelligence, edge computing gateway, post-installation central control, commercial vehicle, industrial computer and other fields
+
+- SoC: Allwinner T527
+- CPU: Octa-core ARM Cortex-A55 in a DynamlQ big.LITTLE configuration, up to 1.8 GHz
+- GPU: ARM G57 MC1 GPU
+- NPU: Up to 2 TOPS (INT8), Embedded 512KB internal buffer
+- RISC-V MCU for Real-time operating system (etc：RTOS)
+- DSP: 600MHz HiFi4
+- RAM: 2GB/4GB(max 4GB), default 4GB LPDDR4x
+- Storage: 8GB/32GB eMMC, default 32GB eMMC
+- Industrial grade temperature: -40°C to 80°C
diff --git a/_blinka/banana_pi_bpi_m2_zero.md b/_blinka/banana_pi_bpi_m2_zero.md
@@ -6,7 +6,7 @@ name: "Banana Pi BPI-M2 Zero"
 manufacturer: "SinoVoip"
 board_url:
  - "https://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO"
-board_image: "banana_pi_m2_zero.jpg"
+board_image: "banana_pi_bpi_m2_zero.jpg"
 download_instructions: ""
 downloads_display: true
 blinka: true

diff --git a/_blinka/banana_pi_bpi_m4_berry.md b/_blinka/banana_pi_bpi_m4_berry.md
@@ -0,0 +1,37 @@
+---
+layout: download
+board_id: "banana_pi_bpi_m4_berry"
+title: "Banana Pi BPI-M4 Berry Download"
+name: "Banana Pi BPI-M4 Berry"
+manufacturer: "SinoVoip"
+board_url:
+ - "https://wiki.banana-pi.org/Banana_Pi_BPI-M4_Berry"
+board_image: "banana_pi_bpi_m4_berry.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2024-09-05
+features:
+  - Wi-Fi
+  - Bluetooth/BLE
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+---
+
+BPI-M4 Berry development board stands as a powerful Single Board Computer (SBC), harnessing the capabilities of the Allwinner H618 System-on-Chip (SoC) to provide developers with impressive performance and a wealth of features. Similar to the Raspberry Pi 4b, the BPI-M4 Berry boasts comparable CPU prowess, 2G LPDDR4 memory and 8G eMMC, integrated WiFi and Bluetooth functionalities, and a familiar 40-pin header layout, alongside 4 USB interfaces and a GbE RJ45 port.
+
+Characterized by its robust performance, versatile features, and remarkable image processing capabilities, stands as an exemplary SBC development platform for professionals within the embedded and computing industries. Equipped with 8GB eMMC flash storage, high-performance decoding and encoding capabilities, and an array of interface options, it caters to a wide spectrum of application domains, including media processing, IoT, and entertainment. Whether catering to novices or seasoned developers, the BPI-M4 Berry development board offers an ideal toolset for realizing creative visions and project objectives.
+
+- Allwinner H618, Quad-core ARM Cortex™-A53 processor
+- ARM Mali G31 GPU
+- WIFI & Bluetooth
+- 2G LPDDR4 RAM
+- 8G eMMC flash memory
+- 1x USB2.0 Type-C OTG, 5V power supply
+- 4x USB2.0 Type-A
+- 1x HDMI 2.0a
+- 1x 3.5mm Audio & TVE jack socket
+- 1x GbE Ethernet port
+
+## Purchase
+* [Amazon](https://amzn.to/3YMdR19)