pycam rev b pins

Author: ladyada

ports/espressif/boards/adafruit_esp32s2_camera/board.c

@@ -56,9 +56,9 @@ void board_init(void) {
     bus->base.type = &displayio_fourwire_type;
     common_hal_displayio_fourwire_construct(bus,
         spi,
-        &pin_GPIO39, // TFT_DC Command or data
-        &pin_GPIO40, // TFT_CS Chip select
-        &pin_GPIO41, // TFT_RESET Reset
+        &pin_GPIO40, // TFT_DC Command or data
+        &pin_GPIO39, // TFT_CS Chip select
+        &pin_GPIO38, // TFT_RESET Reset
         40000000, // Baudrate
         0, // Polarity
         0); // Phase
@@ -87,7 +87,7 @@ void board_init(void) {
         MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
         display_init_sequence,
         sizeof(display_init_sequence),
-        &pin_GPIO38,  // backlight pin
+        &pin_GPIO41,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
         1.0f, // brightness
         false, // single_byte_bounds

ports/espressif/boards/adafruit_esp32s2_camera/mpconfigboard.h

@@ -30,9 +30,9 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
-#define MICROPY_HW_NEOPIXEL_COUNT (6)
+#define MICROPY_HW_NEOPIXEL_COUNT (1)
 
-#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
+#define MICROPY_HW_LED_STATUS (&pin_GPIO1)
 
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)

ports/espressif/boards/adafruit_esp32s2_camera/pins.c

@@ -24,13 +24,12 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
     { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) },
     { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) },
-    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO38) },
-    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO39) },
-    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO40) },
-    { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO38) },
 
-    { MP_ROM_QSTR(MP_QSTR_CARD_CS), MP_ROM_PTR(&pin_GPIO4) },
-    { MP_ROM_QSTR(MP_QSTR_CARD_POWER), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_CARD_CS), MP_ROM_PTR(&pin_GPIO2) },
 
     { MP_ROM_QSTR(MP_QSTR_IRQ), MP_ROM_PTR(&pin_GPIO3) },
 
@@ -39,7 +38,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO45) },
 
     { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
-    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO1) },
 
     { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO17) },
     { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO18) },