HSD #14025217015: arm64: dts: agilex5: Enable SDIO support

The 'no-sdio' property indicates that the controller is
limited in sending SDIO commands during initialization.
This patch removes the property to enable full SDIO
functionality, allowing SDIO peripherals to be properly
initialized and used.

Signed-off-by: Rohan G Thomas <[email protected]>

Author: rohangt07

arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts

@@ -100,7 +100,6 @@
 	cap-mmc-highspeed;
 	disable-wp;
 	sd-uhs-sdr50;
-	no-sdio;
 	cdns,phy-use-ext-lpbk-dqs = <1>;
 	cdns,phy-use-lpbk-dqs = <1>;
 	cdns,phy-use-phony-dqs = <1>;

arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts

@@ -117,7 +117,6 @@
 	sd-uhs-sdr50;
 	sdhci-caps = <0x00000000 0x0000c800>;
 	sdhci-caps-mask = <0x00002000 0x0000ff00>;
-	no-sdio;
 	cdns,phy-use-ext-lpbk-dqs = <1>;
 	cdns,phy-use-lpbk-dqs = <1>;
 	cdns,phy-use-phony-dqs = <1>;

arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_b0.dts

@@ -116,7 +116,6 @@
 	cap-mmc-highspeed;
 	disable-wp;
 	sd-uhs-sdr50;
-	no-sdio;
 	cdns,phy-use-ext-lpbk-dqs = <1>;
 	cdns,phy-use-lpbk-dqs = <1>;
 	cdns,phy-use-phony-dqs = <1>;