Testing core module and preferences on Windows and MacOS

testing_results/testing_results_v2.0.0/general/core/connection_tests.rst

@@ -0,0 +1,279 @@
+.. _connection_tests:
+
+Connection flow
+===============
+
+.. note::
+
+    User guide: :ref:`Scopy Overview <user_guide>`.
+
+.. note::
+    .. list-table:: 
+       :widths: 50 30 30 50 50
+       :header-rows: 1
+
+       * - Tester
+         - Test Date
+         - Scopy version
+         - Plugin version (N/A if not applicable)
+         - Comments
+       * - Popa Andrei
+         - 18.02.2025
+         - 2.0.0 a3a7c43
+         - N/A
+         - Tested on Windows 10
+       * - Danila Andrei
+         - 19.02.2025
+         - 2.0.0 a3a7c43
+         - N/A
+         - Tested on macOS 14.5
+
+Setup environment:
+------------------
+
+.. _m2k-emu-conn:
+
+**M2k.Emu:**
+    - Open Scopy.
+    - Start the iio-emu process using "adalm2000" in the dropdown and 
+      "ip:127.0.0.1" as URI.
+    - Add the device in device browser.
+
+.. _m2k-usb-conn:
+
+**M2k.Usb:**
+    - Open Scopy.
+    - Connect an **ADALM2000** device to the system by USB.
+    - Add the device in device browser.
+
+.. _tst-conn-succ:
+
+Test 1: Verify the connection flow.
+-----------------------------------
+
+**UID:** TST.CONN.SUCC
+
+**Description:** This test checks if the **Connect** button works correctly.
+
+**Test prerequisites:** 
+    - :ref:`TST.ADD.PLUGINS_ADD_SINGLE <tst-add-plugins-add>`
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed in the system.
+    - Use :ref:`M2k.Emu <m2k-emu-conn>` setup.
+    - OS: ANY.
+
+**Steps:**
+    1. Click on the device icon from device browser.
+    2. Click on **Connect** button.
+        - **Expected result:** The **Disconnect** button appears, a status LED 
+          is displayed under the icon in the device browser, and a progress bar 
+          appears in the application's status bar. After a while, the connection 
+          is established, the status LED turns green, and the tools in the menu 
+          become accessible. 
+        - **Actual result:** As expected
+
+..
+  Actual test result goes here.
+..
+
+**Tested OS:** Windows 10, macOS 14.5
+
+..
+  Details about the tested OS goes here.
+
+**Comments:**
+
+..
+  Any comments about the test goes here.
+
+**Result:** PASS
+
+..
+  The result of the test goes here (PASS/FAIL).
+
+
+Test 2: Unplug the device while connecting (AUTO-SCAN).
+-------------------------------------------------------
+
+**UID:** TST.CONN.UNPLUG_AUTO
+
+**Description:** This test verifies Scopy's behavior when the device is 
+unplugged during the connection process.
+
+**Test prerequisites:** 
+    - :ref:`TST.HP.AUTO_SCAN_ON <tst-hp-auto-scan-on>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - The "Regularly scan for new devices" preference is enabled in the 
+      preferences page.
+    - Use :ref:`M2k.Usb <m2k-usb-conn>` setup.
+    - OS: ANY.
+
+**Steps:**
+    1. Click on the device icon from device browser.
+    2. Click on **Connect** button.
+    3. Unplug the device while connecting. 
+        - **Expected result:** The device is removed from device browser. 
+        - **Actual result:** As expected
+
+..
+  Actual test result goes here.
+..
+
+**Tested OS:** Windows 10, macOS 14.5
+
+..
+  Details about the tested OS goes here.
+
+**Comments:**
+
+..
+  Any comments about the test goes here.
+
+**Result:** PASS
+
+..
+  The result of the test goes here (PASS/FAIL).
+
+
+Test 3: Unplug the device while connecting (MANUAL-SCAN).
+---------------------------------------------------------
+
+**UID:** TST.CONN.UNPLUG_AUTO
+
+**Description:** This test verifies Scopy's behavior when the device is 
+unplugged during the connection process.
+
+**Test prerequisites:**
+    - :ref:`TST.HP.MANUAL_SCAN <tst-hp-manual-scan>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - The "Regularly scan for new devices" preference is disabled in the 
+      preferences page.
+    - Use :ref:`M2k.Usb <m2k-usb-conn>` setup.
+    - OS: ANY.
+
+**Steps:**
+    1. Click on the device icon from device browser.
+    2. Click on **Connect** button.
+    3. Unplug the device while connecting. 
+        - **Expected result:** A warning icon appears in the top-right corner 
+          of the device in the device browser, and when hovered over, the 
+          message "The device is not available! Verify the connection!" is 
+          displayed.
+        - **Actual result:** As expected
+
+..
+  Actual test result goes here.
+..
+
+**Tested OS:** Windows 10, macOS 14.5
+
+..
+  Details about the tested OS goes here.
+
+**Comments:**
+
+..
+  Any comments about the test goes here.
+
+**Result:** PASS
+
+..
+  The result of the test goes here (PASS/FAIL).
+
+
+Test 4: Unplug the device before connecting.
+--------------------------------------------
+
+**UID:** TST.CONN.UNPLUG_BEFORE
+
+**Description:** This test verifies Scopy's behavior when the device is 
+unplugged before the connection process.
+
+**Test prerequisites:**
+    - :ref:`TST.HP.MANUAL_SCAN <tst-hp-manual-scan>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - The "Regularly scan for new devices" preference is disabled in the 
+      preferences page.
+    - Use :ref:`M2k.Usb <m2k-usb-conn>` setup.
+    - OS: ANY.
+
+**Steps:**
+    1. Click on the device icon from device browser.
+    2. Unplug the device. 
+    3. Click on **Connect** button.
+        - **Expected result:** The connection process starts but does not 
+          complete. A warning icon appears in the top-right corner.
+        - **Actual result:** As expected
+
+..
+  Actual test result goes here.
+..
+
+**Tested OS:** Windows 10, macOS 14.5
+
+..
+  Details about the tested OS goes here.
+
+**Comments:**
+
+..
+  Any comments about the test goes here.
+
+**Result:** PASS
+
+..
+  The result of the test goes here (PASS/FAIL).
+
+
+Test 5: Disconnecting a device.
+-------------------------------
+
+**UID:** TST.CONN.DISCONN
+
+**Description:** This test checks if the **Disconnect** button works correctly.
+
+**Test prerequisites:**
+    - :ref:`TST.CONN.SUCC <tst-conn-succ>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed in the system.
+    - Use :ref:`M2k.Emu <m2k-emu-conn>` setup.
+    - OS: ANY.
+
+**Steps:**
+    1. Click on the device icon from device browser.
+    2. Click on **Connect** button.
+    3. Wait until the connection is done .
+    4. Click on **Disconnect** button.
+        - **Expected result:** The device is disconnected, the **Connect** 
+          button appears, the device remains in the device browser, and the 
+          tools in the menu are no longer accessible.
+        - **Actual result:** As expected
+
+..
+  Actual test result goes here.
+..
+
+**Tested OS:** Windows 10, macOS 14.5
+
+..
+  Details about the tested OS goes here.
+
+**Comments:**
+
+..
+  Any comments about the test goes here.
+
+**Result:** PASS
+
+..
+  The result of the test goes here (PASS/FAIL).