Imagotag 2.6/2.2 BWR GL120 hacking

Chips used

• CC2510 - MCU + radio - 8051
• NT3H2111 - NFC
• GDEW026Z39 - 2.6" EPD display
• or GDEW0213Z16 - 2.13" EPD display
• both displays use IL0373 driver
• TPS61071 - boost converter - used (only?) for white LED
• W25X10CL - Winbond 1Mbits NOR SPI flash

CC2510 connections

Port 0

• P0:0 - EPD power enable (active low via a P channel fet)
• P0:1 - EPD CS (SPI interface chip select)
• P0:2 - debug port
• P0:3 - EPD SDI (SPI interface serial data in)
• P0:4 - SDA to NFC chip
• P0:5 - EPD CLK (SPI interface clock)
• P0:6 - SCL to NFC chip
• P0:7 - not connected

Port 1

• P1:0 - NFC VCC (seems to power NFC chip and SPI flash)
• P1:1 - NFC FD (field detection)
• P1:2 - EPD DC (data/command select for display)
• P1:3 - EPD BUSY (detect if display busy)
• P1:4 - SPI flash CS
• P1:5 - SPI flash CLK
• P1:6 - SPI flahs MOSI
• P1:7 - SPI flahs MISO

Port 2

• P2:0 - EPD Reset (display reset)
• P2:1 - debug data and white LED
• P2:2 - debug clock and LED boost chip enable (TPS61071)