Update generated code for DPF 261_rcs_cs_cyl on main

doc/source/_static/dpf_operators.html

@@ -14632,10 +14632,10 @@ <h2 class="h2-main">Configurating operators</h2>
 </div></td></tr></tbody></table></div><h2 class="op-des-h2">Outputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="fields_container"></pin-name></td><td><req-type typeName="(fields_container)"></req-type></td></tr></tbody></table></div><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elemental_fraction_fc" license="any_dpf_supported_increments" cat="averaging" plugin="core" cpp-name="elemental_fraction_fc"></scripting-part><h2 class="op-des-h2">Changelog</h2><op-changelog content='{"0.0.0":"New"}'></op-changelog></div><div class="operator" id="extend to mid nodes (fields container)" scripting_name="extend_to_mid_nodes_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: extend to mid nodes (fields container)</h1><figure class="figure-op-des"> <figcaption > Description  </figcaption><div class = "figure-op-des-text"><p>Extends Elemental Nodal or Nodal fields defined on corner nodes to Elemental Nodal fields defined also on the mid nodes.</p>
 </div></figure><div class="op-version">Version 0.0.0</div><h2 class="op-des-h2">Inputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="fields_container"></pin-name></td><td><req-type typeName="(fields_container)"></req-type></td></tr></tbody></table><table class="pin-box"><tbody><tr><td><pin-number-optional n="1" ellipsis = "false"></pin-number-optional></td><td><pin-name name="mesh"></pin-name></td><td><req-type typeName="(abstract_meshed_region)"></req-type></td><td><div class = "pin-des-text"><p>The mesh region in this pin is used to perform the averaging. It is used if there is no fields support.</p>
 </div></td></tr></tbody></table></div><h2 class="op-des-h2">Outputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="fields_container"></pin-name></td><td><req-type typeName="(fields_container)"></req-type></td></tr></tbody></table></div><h2 class="op-des-h2">Configurations</h2><config-spec name="inplace" default="false" doc="The output is written over the input to save memory if this configuration is set to true. Only supported for nodal fields in input." types="bool" ></config-spec><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="extend_to_mid_nodes_fc" license="any_dpf_supported_increments" cat="averaging" plugin="core" cpp-name="extend_to_mid_nodes_fc"></scripting-part><h2 class="op-des-h2">Changelog</h2><op-changelog content='{"0.0.0":"New"}'></op-changelog></div><div class="operator" id="rotate cylindrical coordinates" scripting_name="rotate_in_cylindrical_cs"plugin="core"cat="geo"><h1 class="op-des-h1">geo: rotate cylindrical coordinates</h1><figure class="figure-op-des"> <figcaption > Description  </figcaption><div class = "figure-op-des-text"><p>Rotates a field to its corresponding values into the specified cylindrical coordinate system (corresponding to the field position). If a coordinate system is not set in the coordinate_system pin, the field is rotated on each node following the local polar coordinate system.</p>
-</div></figure><div class="op-version">Version 0.0.0</div><h2 class="op-des-h2">Inputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="field"></pin-name></td><td><req-type typeName="(field | fields_container)"></req-type></td><td><div class = "pin-des-text"><p>field or fields container with only one field is expected</p>
+</div></figure><div class="op-version">Version 1.0.0</div><h2 class="op-des-h2">Inputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="field"></pin-name></td><td><req-type typeName="(field | fields_container)"></req-type></td><td><div class = "pin-des-text"><p>field or fields container with only one field is expected</p>
 </div></td></tr></tbody></table><table class="pin-box"><tbody><tr><td><pin-number-optional n="1" ellipsis = "false"></pin-number-optional></td><td><pin-name name="coordinate_system"></pin-name></td><td><req-type typeName="(field)"></req-type></td><td><div class = "pin-des-text"><p>3-3 rotation matrix and origin coordinates must be set here to define a coordinate system.</p>
 </div></td></tr></tbody></table><table class="pin-box"><tbody><tr><td><pin-number-optional n="2" ellipsis = "false"></pin-number-optional></td><td><pin-name name="mesh"></pin-name></td><td><req-type typeName="(abstract_meshed_region)"></req-type></td><td><div class = "pin-des-text"><p>Mesh support of the input field.</p>
-</div></td></tr></tbody></table></div><h2 class="op-des-h2">Outputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="field"></pin-name></td><td><req-type typeName="(field)"></req-type></td></tr></tbody></table></div><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rotate_in_cylindrical_cs" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="transform_cylindricalCS"></scripting-part><h2 class="op-des-h2">Changelog</h2><op-changelog content='{"0.0.0":"New"}'></op-changelog></div><div class="operator" id="rotate in cylindrical coordinates (fields container)" scripting_name="rotate_in_cylindrical_cs_fc"plugin="core"cat="geo"><h1 class="op-des-h1">geo: rotate in cylindrical coordinates (fields container)</h1><figure class="figure-op-des"> <figcaption > Description  </figcaption><div class = "figure-op-des-text"><p>Rotates all the fields of a fields container (not defined with a cynlindrical coordinate system) to its corresponding values into the specified cylindrical coordinate system (corresponding to the field position). If a coordinate system is not set in the coordinate_system pin, the field is rotated on each node following the local polar coordinate system.</p>
+</div></td></tr></tbody></table></div><h2 class="op-des-h2">Outputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="field"></pin-name></td><td><req-type typeName="(field)"></req-type></td></tr></tbody></table></div><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rotate_in_cylindrical_cs" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="transform_cylindricalCS"></scripting-part><h2 class="op-des-h2">Changelog</h2><op-changelog content='{"0.0.0":"New","1.0.0":"Fix bug for the rotation of strain fields with a cylindrical system whose axis is rotated."}'></op-changelog></div><div class="operator" id="rotate in cylindrical coordinates (fields container)" scripting_name="rotate_in_cylindrical_cs_fc"plugin="core"cat="geo"><h1 class="op-des-h1">geo: rotate in cylindrical coordinates (fields container)</h1><figure class="figure-op-des"> <figcaption > Description  </figcaption><div class = "figure-op-des-text"><p>Rotates all the fields of a fields container (not defined with a cynlindrical coordinate system) to its corresponding values into the specified cylindrical coordinate system (corresponding to the field position). If a coordinate system is not set in the coordinate_system pin, the field is rotated on each node following the local polar coordinate system.</p>
 </div></figure><div class="op-version">Version 0.0.0</div><h2 class="op-des-h2">Inputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="field"></pin-name></td><td><req-type typeName="(field | fields_container)"></req-type></td></tr></tbody></table><table class="pin-box"><tbody><tr><td><pin-number-optional n="1" ellipsis = "false"></pin-number-optional></td><td><pin-name name="coordinate_system"></pin-name></td><td><req-type typeName="(field)"></req-type></td><td><div class = "pin-des-text"><p>3-3 rotation matrix and origin coordinates must be set here to define a coordinate system.</p>
 </div></td></tr></tbody></table><table class="pin-box"><tbody><tr><td><pin-number-optional n="2" ellipsis = "false"></pin-number-optional></td><td><pin-name name="mesh"></pin-name></td><td><req-type typeName="(abstract_meshed_region)"></req-type></td><td><div class = "pin-des-text"><p>Mesh support of the input fields_container, in case it does not have one defined.</p>
 </div></td></tr></tbody></table></div><h2 class="op-des-h2">Outputs</h2><div><table class="pin-box"><tbody><tr><td><pin-number n="0" ellipsis = "false"></pin-number></td><td><pin-name name="fields_container"></pin-name></td><td><req-type typeName="(fields_container)"></req-type></td></tr></tbody></table></div><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rotate_in_cylindrical_cs_fc" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="transform_cylindrical_cs_fc"></scripting-part><h2 class="op-des-h2">Changelog</h2><op-changelog content='{"0.0.0":"New"}'></op-changelog></div><div class="operator" id="spherical to cartesian coordinates (fields container)" scripting_name="spherical_to_cartesian_fc"plugin="core"cat="geo"><h1 class="op-des-h1">geo: spherical to cartesian coordinates (fields container)</h1><figure class="figure-op-des"> <figcaption > Description  </figcaption><div class = "figure-op-des-text"><p>Converts 3D field from spherical coordinates to cartesian coordinates.</p>