[Kconfig] Fix Kconfig style

arch/arm/src/rp2040/Kconfig

@@ -300,7 +300,7 @@ config RP2040_PWM0A_INVERT
 
 if RP2040_PWM_MULTICHAN && RP2040_PWM_NCHANNELS > 1
 
-	config RP2040_PWM0B_INVERT
+config RP2040_PWM0B_INVERT
 	bool "PWM0 channel 2 invert"
 	default n
 	---help---
@@ -309,7 +309,7 @@ if RP2040_PWM_MULTICHAN && RP2040_PWM_NCHANNELS > 1
 
 endif # RP2040_PWM_MULTICHAN && RP2040_PWM_NCHANNELS > 1
 
-	config RP2040_PWM0_PHASE_CORRECT
+config RP2040_PWM0_PHASE_CORRECT
 	bool "PWM0 phase correct"
 	default n
 

arch/arm/src/rp23xx/Kconfig

@@ -313,7 +313,7 @@ config RP23XX_PWM0A_INVERT
 
 if RP23XX_PWM_MULTICHAN && RP23XX_PWM_NCHANNELS > 1
 
-	config RP23XX_PWM0B_INVERT
+config RP23XX_PWM0B_INVERT
 	bool "PWM0 channel 2 invert"
 	default n
 	---help---
@@ -322,7 +322,7 @@ if RP23XX_PWM_MULTICHAN && RP23XX_PWM_NCHANNELS > 1
 
 endif # RP23XX_PWM_MULTICHAN && RP23XX_PWM_NCHANNELS > 1
 
-	config RP23XX_PWM0_PHASE_CORRECT
+config RP23XX_PWM0_PHASE_CORRECT
 	bool "PWM0 phase correct"
 	default n
 

arch/risc-v/src/common/espressif/Kconfig

@@ -248,7 +248,7 @@ config ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
 	bool "Leave UART bootloader encryption enabled"
 	depends on ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
 	default n
-	help
+	---help---
 		If not set (default), the bootloader will permanently disable UART bootloader encryption access on
 		first boot. If set, the UART bootloader will still be able to access hardware encryption.
 
@@ -290,12 +290,12 @@ choice ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE
 		Refer to the Flash Encryption section of the ESP-IDF Programmer's Guide for details:
 		https://docs.espressif.com/projects/esp-idf/en/latest/esp32/security/flash-encryption.html#flash-encryption-configuration
 
-	config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
-		bool "Development (NOT SECURE)"
-		select ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
+config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+	bool "Development (NOT SECURE)"
+	select ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
 
-	config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_RELEASE
-		bool "Release"
+config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_RELEASE
+	bool "Release"
 
 endchoice
 
@@ -1721,11 +1721,13 @@ choice ESPRESSIF_WIFI_MGMT_RX_BUFFER
 		If "Dynamic" is selected, each WiFi RX MGMT buffer is allocated as needed when a MGMT data frame is
 		received. The MGMT buffer is freed after the MGMT data frame has been processed by the WiFi driver.
 
-	config ESPRESSIF_WIFI_STATIC_RX_MGMT_BUFFER
-		bool "Static"
-	config ESPRESSIF_WIFI_DYNAMIC_RX_MGMT_BUFFER
-		bool "Dynamic"
-endchoice
+config ESPRESSIF_WIFI_STATIC_RX_MGMT_BUFFER
+	bool "Static"
+
+config ESPRESSIF_WIFI_DYNAMIC_RX_MGMT_BUFFER
+	bool "Dynamic"
+
+endchoice # ESPRESSIF_WIFI_MGMT_RX_BUFFER
 
 config ESPRESSIF_WIFI_DYNAMIC_RX_MGMT_BUFFER_TYPE
 	int
@@ -1783,11 +1785,13 @@ choice ESPRESSIF_WIFI_TX_BUFFER
 
 		TODO: There is a special dependency for Dynamic if SPIRAM is enabled.
 
-	config ESPRESSIF_WIFI_STATIC_TX_BUFFER
-		bool "Static"
-	config ESPRESSIF_WIFI_DYNAMIC_TX_BUFFER
-		bool "Dynamic"
-endchoice
+config ESPRESSIF_WIFI_STATIC_TX_BUFFER
+	bool "Static"
+
+config ESPRESSIF_WIFI_DYNAMIC_TX_BUFFER
+	bool "Dynamic"
+
+endchoice # ESPRESSIF_WIFI_TX_BUFFER
 
 config ESPRESSIF_WIFI_TX_BUFFER_TYPE
 	int

arch/risc-v/src/rp23xx-rv/Kconfig

@@ -304,7 +304,7 @@ config RP23XX_RV_PWM0A_INVERT
 
 if RP23XX_RV_PWM_MULTICHAN && RP23XX_RV_PWM_NCHANNELS > 1
 
-	config RP23XX_RV_PWM0B_INVERT
+config RP23XX_RV_PWM0B_INVERT
 	bool "PWM0 channel 2 invert"
 	default n
 	---help---
@@ -313,7 +313,7 @@ if RP23XX_RV_PWM_MULTICHAN && RP23XX_RV_PWM_NCHANNELS > 1
 
 endif # RP23XX_RV_PWM_MULTICHAN && RP23XX_RV_PWM_NCHANNELS > 1
 
-	config RP23XX_RV_PWM0_PHASE_CORRECT
+config RP23XX_RV_PWM0_PHASE_CORRECT
 	bool "PWM0 phase correct"
 	default n
 

arch/xtensa/src/common/espressif/Kconfig

@@ -407,7 +407,7 @@ config ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
 	bool "Leave UART bootloader encryption enabled"
 	depends on ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
 	default n
-	help
+	---help---
 		If not set (default), the bootloader will permanently disable UART bootloader encryption access on
 		first boot. If set, the UART bootloader will still be able to access hardware encryption.
 
@@ -449,14 +449,14 @@ choice ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE
 		Refer to the Flash Encryption section of the ESP-IDF Programmer's Guide for details:
 		https://docs.espressif.com/projects/esp-idf/en/latest/esp32/security/flash-encryption.html#flash-encryption-configuration
 
-	config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
-		bool "Development (NOT SECURE)"
-		select ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
+config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
+	bool "Development (NOT SECURE)"
+	select ESPRESSIF_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
 
-	config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_RELEASE
-		bool "Release"
+config ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE_RELEASE
+	bool "Release"
 
-endchoice
+endchoice # ESPRESSIF_SECURE_FLASH_ENCRYPTION_MODE
 
 config ESPRESSIF_SECURE_FLASH_ENC_USE_HOST_KEY
 	bool "Require user provided encryption key for flash encryption"

arch/xtensa/src/esp32/Kconfig

@@ -750,7 +750,7 @@ config ESP32_I2C1
 	default n
 	select ESP32_I2C
 
-	config ESP32_I2C_PERIPH_MASTER_MODE
+config ESP32_I2C_PERIPH_MASTER_MODE
 	bool
 	depends on (ESP32_I2C0_MASTER_MODE || ESP32_I2C1_MASTER_MODE)
 	default n

arch/xtensa/src/esp32s3/Kconfig

@@ -1649,18 +1649,19 @@ choice ESP32S3_UNIVERSAL_MAC_ADDRESSES
 		a custom universal MAC address range, the correct setting will depend on the allocation of MAC
 		addresses in this range (either 2 or 4 per device.)
 
-	config ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO
-		bool "Two"
-		select ESP_MAC_ADDR_UNIVERSE_WIFI_STA
-		select ESP_MAC_ADDR_UNIVERSE_BT
-
-	config ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR
-		bool "Four"
-		select ESP_MAC_ADDR_UNIVERSE_WIFI_STA
-		select ESP_MAC_ADDR_UNIVERSE_WIFI_AP
-		select ESP_MAC_ADDR_UNIVERSE_BT
-		select ESP_MAC_ADDR_UNIVERSE_ETH
-endchoice
+config ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO
+	bool "Two"
+	select ESP_MAC_ADDR_UNIVERSE_WIFI_STA
+	select ESP_MAC_ADDR_UNIVERSE_BT
+
+config ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR
+	bool "Four"
+	select ESP_MAC_ADDR_UNIVERSE_WIFI_STA
+	select ESP_MAC_ADDR_UNIVERSE_WIFI_AP
+	select ESP_MAC_ADDR_UNIVERSE_BT
+	select ESP_MAC_ADDR_UNIVERSE_ETH
+
+endchoice # ESP32S3_UNIVERSAL_MAC_ADDRESSES
 
 config ESP32S3_UNIVERSAL_MAC_ADDRESSES
 	int
@@ -1916,22 +1917,23 @@ choice ESP32S3_FLASH_SIZE
 	depends on ARCH_CHIP_ESP32S3CUSTOM
 	default ESP32S3CUSTOM_FLASH_4M
 
-	config ESP32S3CUSTOM_FLASH_4M
-		bool "ESP32S3 Flash 4MB"
-		select ESP32S3_FLASH_4M
+config ESP32S3CUSTOM_FLASH_4M
+	bool "ESP32S3 Flash 4MB"
+	select ESP32S3_FLASH_4M
 
-	config ESP32S3CUSTOM_FLASH_8M
-		bool "ESP32S3 Flash 8MB"
-		select ESP32S3_FLASH_8M
+config ESP32S3CUSTOM_FLASH_8M
+	bool "ESP32S3 Flash 8MB"
+	select ESP32S3_FLASH_8M
 
-	config ESP32S3CUSTOM_FLASH_16M
-		bool "ESP32S3 Flash 16MB"
-		select ESP32S3_FLASH_16M
+config ESP32S3CUSTOM_FLASH_16M
+	bool "ESP32S3 Flash 16MB"
+	select ESP32S3_FLASH_16M
+
+config ESP32S3CUSTOM_FLASH_32M
+	bool "ESP32S3 Flash 32MB"
+	select ESP32S3_FLASH_32M
+	select ESP32S3_SPI_FLASH_USE_32BIT_ADDRESS
 
-	config ESP32S3CUSTOM_FLASH_32M
-		bool "ESP32S3 Flash 32MB"
-		select ESP32S3_FLASH_32M
-		select ESP32S3_SPI_FLASH_USE_32BIT_ADDRESS
 endchoice # ESP32S3_FLASH_SIZE
 
 config ESP32S3_HAVE_OTA_PARTITION