修正错误

Author: YanLien

docs/quickstart/rk3588j.md

@@ -46,7 +46,7 @@ git clone https://github.com/arceos-hypervisor/firefly-itx-rk3588j.git
 3. 验证目录结构
 
 执行成功后,目录结构应如下:
-![](/docs/quickstart/img_rk3588j/img-1.png)
+![](./img_rk3588j/img-1.png)
 
 ## 构建
 
@@ -146,39 +146,39 @@ ls -lh boot.img
 
 1. 将开发板通过串口调试工具连接上位机，注意串口线的颜色连接方式，同时将烧录线连接
 
-![](/docs/quickstart/img_rk3588j/img-2.png)
-![](/docs/quickstart/img_rk3588j/img-3.png)
-![](/docs/quickstart/img_rk3588j/img-4.png)
-![](/docs/quickstart/img_rk3588j/img-5.png)
-![](/docs/quickstart/img_rk3588j/img-6.png)
+![](./img_rk3588j/img-2.png)
+![](./img_rk3588j/img-3.png)
+![](./img_rk3588j/img-4.png)
+![](./img_rk3588j/img-5.png)
+![](./img_rk3588j/img-6.png)
 
 2. 配置烧录工具（在Windows下进行配置）
     关于烧录工具的配置详情参考[https://wiki.t-firefly.com/zh_CN/ROC-RK3588-PC/upgrade_firmware.html](https://wiki.t-firefly.com/zh_CN/ROC-RK3588-PC/upgrade_firmware.html)
 
 3. Type-C 数据线接好后在断电重启时在串口调试终端快速按ctrl + c进入uboot，输入reboot loader进入烧写模式（也可在断电时使用小工具按住REC孔的按键，然后上电，等待进入烧写模式后松开即可）
 
-![](/docs/quickstart/img_rk3588j/img-7.png)
+![](./img_rk3588j/img-7.png)
 
 注意串口波特率需要设置为1500000
 
 4. 从Uboot进入烧写模式：
 
-![](/docs/quickstart/img_rk3588j/img-8.png)
+![](./img_rk3588j/img-8.png)
 
 5. 长按REC键进入烧写模式：
 
-![](/docs/quickstart/img_rk3588j/img-9.png)
-![](/docs/quickstart/img_rk3588j/img-10.png)
+![](./img_rk3588j/img-9.png)
+![](./img_rk3588j/img-10.png)
 
 6. 在空白处右键，选择Load Config进入配置选择， 
 
-![](/docs/quickstart/img_rk3588j/img-11.png)
+![](./img_rk3588j/img-11.png)
 
 7. 选择rk3588-param.txt配置 
 
-![](/docs/quickstart/img_rk3588j/img-12.png)
+![](./img_rk3588j/img-12.png)
 
 8. 勾选boot，并填入`boot.img`的绝对路径，点击run即可烧入镜像
 
-![](/docs/quickstart/img_rk3588j/img-13.png)
+![](./img_rk3588j/img-13.png)