armbian · igorpecovnik · Jan 25, 2026 · Jan 14, 2026 · Jan 14, 2026 · Jan 14, 2026
@@ -1,4 +1,4 @@
-# Armbian defconfig generated with 6.12
+# Armbian defconfig generated with 6.18
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -74,6 +74,8 @@ CONFIG_ACPI_APEI=y
 CONFIG_ACPI_APEI_GHES=y
 CONFIG_ACPI_APEI_MEMORY_FAILURE=y
 CONFIG_ACPI_APEI_EINJ=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_BLK_DEV_THROTTLING=y
@@ -283,15 +285,16 @@ CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_STREAM_PARSER=y
-CONFIG_CAN=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_DEBUGFS is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_QCA=y
 CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
@@ -358,6 +361,7 @@ CONFIG_NVME_HWMON=y
 CONFIG_QCOM_FASTRPC=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
+CONFIG_NTSYNC=m
 CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 CONFIG_UACCE=m
@@ -484,22 +488,13 @@ CONFIG_PHYLIB=y
 CONFIG_AQUANTIA_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_VITESSE_PHY=y
-CONFIG_CAN_8DEV_USB=m
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB=m
-CONFIG_CAN_ETAS_ES58X=m
-CONFIG_CAN_F81604=m
-CONFIG_CAN_GS_USB=m
-CONFIG_CAN_KVASER_USB=m
-CONFIG_CAN_MCBA_USB=m
-CONFIG_CAN_PEAK_USB=m
-CONFIG_CAN_UCAN=m
 CONFIG_MDIO_BCM_UNIMAC=m
 CONFIG_MDIO_THUNDER=y
 CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
+CONFIG_PPP=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
@@ -534,6 +529,7 @@ CONFIG_USB_NET_AQC111=m
 # CONFIG_WLAN_VENDOR_ADMTEK is not set
 CONFIG_ATH11K=m
 CONFIG_ATH11K_PCI=m
+CONFIG_ATH12K=m
 # CONFIG_WLAN_VENDOR_ATMEL is not set
 # CONFIG_WLAN_VENDOR_BROADCOM is not set
 # CONFIG_WLAN_VENDOR_INTEL is not set
@@ -619,8 +615,9 @@ CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_BATTERY_BQ27XXX=y
-CONFIG_CHARGER_QCOM_SMB5=m
-CONFIG_BATTERY_QCOM_FG=m
+CONFIG_CHARGER_BQ25970=y
+CONFIG_CHARGER_QCOM_SMB5=y
+CONFIG_BATTERY_QCOM_FG=y
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
@@ -665,6 +662,7 @@ CONFIG_REGULATOR_PCA9450=y
 CONFIG_REGULATOR_PF8X00=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_REFGEN=y
 CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
@@ -740,15 +738,15 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_ITE=y
 CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_LOGITECH=m
 CONFIG_HID_REDRAGON=y
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
 CONFIG_HID_MULTITOUCH=m
 CONFIG_HID_NINTENDO=m
-CONFIG_USB_HIDDEV=y
 CONFIG_I2C_HID_ACPI=m
 CONFIG_I2C_HID_OF=m
+CONFIG_USB_HIDDEV=y
 CONFIG_USB_CONN_GPIO=m
 CONFIG_USB=y
 CONFIG_USB_OTG=y
@@ -759,6 +757,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_DWC3=y
@@ -804,39 +803,43 @@ CONFIG_TYPEC_MUX_FSA4480=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
 CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_TYPEC_DP_ALTMODE=m
-CONFIG_MMC=y
+CONFIG_MMC=m
 CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_ARMMMCI=m
 # CONFIG_MMC_STM32_SDMMC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_ACPI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_MSM=m
+CONFIG_MMC_USHC=m
 CONFIG_SCSI_UFSHCD=y
 CONFIG_SCSI_UFS_BSG=y
 CONFIG_SCSI_UFS_HWMON=y
 CONFIG_SCSI_UFSHCD_PLATFORM=y
 CONFIG_SCSI_UFS_QCOM=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
 CONFIG_LEDS_CLASS_MULTICOLOR=y
 CONFIG_LEDS_HTR3212=m
 CONFIG_LEDS_LM3692X=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_USER=y
-CONFIG_LEDS_GROUP_MULTICOLOR=y
-CONFIG_LEDS_PWM_MULTICOLOR=y
-CONFIG_LEDS_QCOM_LPG=y
+CONFIG_LEDS_USER=m
+CONFIG_LEDS_GROUP_MULTICOLOR=m
+CONFIG_LEDS_PWM_MULTICOLOR=m
+CONFIG_LEDS_QCOM_FLASH=m
+CONFIG_LEDS_QCOM_LPG=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_NETDEV=m
 CONFIG_EDAC=y
 CONFIG_EDAC_GHES=y
 CONFIG_RTC_CLASS=y

@@ -16,14 +16,13 @@ enable_extension "image-output-abl"
 case $BRANCH in
 
 	current)
-		declare -g KERNEL_MAJOR_MINOR="6.12" # Major and minor versions of this kernel.
-		declare -g KERNELBRANCH='branch:linux-6.12.y'
+		declare -g KERNEL_MAJOR_MINOR="6.18" # Major and minor versions of this kernel.
+		declare -g KERNELBRANCH='branch:linux-6.18.y'
 		declare -g -i KERNEL_GIT_CACHE_TTL=120 # 2 minutes; this is a high-traffic repo
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.14" # Major and minor versions of this kernel.
-		declare -g KERNELBRANCH='branch:linux-6.14.y'
+		declare -g KERNEL_MAJOR_MINOR="6.19" # Major and minor versions of this kernel.
 		declare -g -i KERNEL_GIT_CACHE_TTL=120 # 2 minutes; this is a high-traffic repo
 		;;
 

@@ -0,0 +1,29 @@
+config: # This is file 'patch/kernel/archive/sm8250-6.18/0000.patching_config.yaml'
+
+  # Just some info stuff; not used by the patching scripts
+  name: sm8250-6.18
+  kind: kernel
+  type: mainline # or: vendor
+  branch: linux-6.18.y
+  last-known-good-tag: v6.18.3
+  maintainers:
+    - { github: rpardini, name: Ricardo Pardini, email: ricardo@pardini.net, armbian-forum: rpardini }
+
+  # .dts files in these directories will be copied as-is to the build tree; later ones overwrite earlier ones.
+  # This is meant to provide a way to "add a board DTS" without having to null-patch them in.
+  dts-directories:
+    - { source: "dt", target: "arch/arm64/boot/dts/qcom" }
+
+  # the Makefile in each of these directories will be magically patched to include the dts files copied
+  #  or patched-in; overlay subdir will be included "-y" if it exists.
+  # No more Makefile patching needed, yay!
+  auto-patch-dt-makefile:
+    - { directory: "arch/arm64/boot/dts/qcom", config-var: "CONFIG_ARCH_QCOM" }
+
+  # configuration for when applying patches to git / auto-rewriting patches (development cycle helpers)
+  patches-to-git:
+    do-not-commit-files:
+      - "MAINTAINERS" # constant churn, drop them. sorry.
+    do-not-commit-regexes: # Python-style regexes
+      - "^arch/([a-zA-Z0-9]+)/boot/dts/([a-zA-Z0-9]+)/Makefile$" # ignore DT Makefile patches, we've an auto-patcher now
+
@@ -0,0 +1,138 @@
+From 56330cd8650e8b60b836727156a94a67485a3c67 Mon Sep 17 00:00:00 2001
+From: Jianhua Lu <lujianhua000@gmail.com>
+Date: Thu, 4 Aug 2022 13:26:53 +0800
+Subject: [PATCH 01/62] drm: Add drm notifier support
+
+Signed-off-by: Jiali Chen <chenjiali@radxa.com>
+---
+ drivers/gpu/drm/Makefile       |  3 +-
+ drivers/gpu/drm/drm_notifier.c | 58 ++++++++++++++++++++++++++++++++++
+ include/drm/drm_notifier.h     | 37 ++++++++++++++++++++++
+ 3 files changed, 97 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/gpu/drm/drm_notifier.c
+ create mode 100644 include/drm/drm_notifier.h
+
+diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
+index 4dafbdc8f86a..9b2434daa24f 100644
+--- a/drivers/gpu/drm/Makefile
++++ b/drivers/gpu/drm/Makefile
+@@ -72,7 +72,8 @@ drm-y := \
+ 	drm_vblank.o \
+ 	drm_vblank_work.o \
+ 	drm_vma_manager.o \
+-	drm_writeback.o
++	drm_writeback.o \
++	drm_notifier.o
+ drm-$(CONFIG_DRM_CLIENT) += \
+ 	drm_client.o \
+ 	drm_client_event.o \
+diff --git a/drivers/gpu/drm/drm_notifier.c b/drivers/gpu/drm/drm_notifier.c
+new file mode 100644
+index 000000000000..0b90d02d8692
+--- /dev/null
++++ b/drivers/gpu/drm/drm_notifier.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
++ * Copyright (C) 2021 XiaoMi, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/notifier.h>
++#include <drm/drm_notifier.h>
++
++static BLOCKING_NOTIFIER_HEAD(mi_drm_notifier_list);
++
++/**
++ * mi_drm_register_client - register a client notifier
++ * @nb: notifier block to callback on events
++ *
++ * This function registers a notifier callback function
++ * to msm_drm_notifier_list, which would be called when
++ * received unblank/power down event.
++ */
++int mi_drm_register_client(struct notifier_block *nb)
++{
++	return blocking_notifier_chain_register(&mi_drm_notifier_list, nb);
++}
++EXPORT_SYMBOL(mi_drm_register_client);
++
++/**
++ * mi_drm_unregister_client - unregister a client notifier
++ * @nb: notifier block to callback on events
++ *
++ * This function unregisters the callback function from
++ * msm_drm_notifier_list.
++ */
++int mi_drm_unregister_client(struct notifier_block *nb)
++{
++	return blocking_notifier_chain_unregister(&mi_drm_notifier_list, nb);
++}
++EXPORT_SYMBOL(mi_drm_unregister_client);
++
++/**
++ * mi_drm_notifier_call_chain - notify clients of drm_events
++ * @val: event MSM_DRM_EARLY_EVENT_BLANK or MSM_DRM_EVENT_BLANK
++ * @v: notifier data, inculde display id and display blank
++ *     event(unblank or power down).
++ */
++int mi_drm_notifier_call_chain(unsigned long val, void *v)
++{
++	return blocking_notifier_call_chain(&mi_drm_notifier_list, val, v);
++}
++EXPORT_SYMBOL(mi_drm_notifier_call_chain);
+diff --git a/include/drm/drm_notifier.h b/include/drm/drm_notifier.h
+new file mode 100644
+index 000000000000..fd0e976559b8
+--- /dev/null
++++ b/include/drm/drm_notifier.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
++ * Copyright (C) 2021 XiaoMi, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _DRM_NOTIFIER_H_
++#define _DRM_NOTIFIER_H_
++
++#include <linux/notifier.h>
++
++/* A hardware display blank change occurred */
++#define MI_DRM_EVENT_BLANK              0x01
++/* A hardware display blank early change occurred */
++#define MI_DRM_EARLY_EVENT_BLANK        0x02
++
++enum drm_notifier_data {
++	/* panel: power on */
++	MI_DRM_BLANK_UNBLANK,
++	/* panel: power down */
++	MI_DRM_BLANK_POWERDOWN,
++};
++
++int mi_drm_register_client(struct notifier_block *nb);
++int mi_drm_unregister_client(struct notifier_block *nb);
++int mi_drm_notifier_call_chain(unsigned long val, void *v);
++
++#endif /* _DRM_NOTIFIER_H */
+-- 
+2.47.3
+