v0.13.10

What's Changed

Hot fix to address bug in #369, allowing network topology to be obtained when a network has more than 2 Salinity sensors present.

Fixes

• Fixes Missing RBR Readings by @matt001k in #368
• Prevent Topology Failures When A System Has Multiple Salinity Sensors by @matt001k in #369

Full Changelog: v0.13.9...v0.13.10

v0.13.9

What's Changed

Update Salinity sensor's max standard deviation value to support reduced bitpacking results on Spotter platform.

Features

• Change Salinity Standard Deviation Max by @matt001k in #367

Full Changelog: v0.13.8...v0.13.9

v0.13.8

What's Changed

A fix that addresses chipset errata for the STM32U575, causing the chip to get stuck in low power mode.

Fixes

• STM32U5 Chip Errata 2.2.26 Causing Processor To Get Stuck In Low Power Mode by @matt001k in #366

Full Changelog: v0.13.7...v0.13.8

v0.13.7

What's Changed

• Test/try reverting watchdog changes by @victorsowa12 in #365

Full Changelog: v0.13.6...v0.13.7

v0.13.6

What's Changed

This release is mainly centered around a bug fix in the Salinity application that caused a message to be spammed to the SD card on Sofar Ocean's Spotter.
Also introduces the Pixi package manager into the repo!
Allowing an alternative way of setting up the tooling required for building/flashing Bristlemouth firmware.

Fixes

• Salinity App Spam To Spotter Log File by @matt001k in #364

Internal Improvements

• Setup to use Pixi by @castelao in #353

New Contributors

• @castelao made their first contribution in #353

Full Changelog: v0.13.5...v0.13.6

v0.13.5

What's Changed

This release features the salinity sensor application!
Also, updates that allow the bridge power controller to have the same interval and duration time in order to allow aggregation of sensor data with continuous network power.

Features

• Aanderaa Salinity sensor support for the Bridge application by @LarkspurRaven in #340
• Salinity stdev max value check by @victorsowa12 in #345
• SMEE Aanderaa 5990 Salinity Application (Mote) by @uma-kat in #333
• Improve Command Sending To Aanderaa 5990 Sensor by @matt001k in #354
• Add New Configuration Parameters For Salinity Sensor Calibration by @matt001k in #355
• Add In Read Validate Write Logic To aanderaa_conductivity_sensor.cpp by @matt001k in #358
• Bridge power controller aggregations allowing same interval and duration by @matt001k in #346
• Remote bm commands while bus is off by @matt001k in #352

Fixes

• Ignore spurious null bytes from half-duplex transaction switching by @evanShap in #337
• Bug, rx live tags by @evanShap in #342
• Missed a correct type interpolation in Rx-LIVE print by @evanShap in #344
• Change Conductivity App Name to Salinity by @matt001k in #347
• Change console print from conductivity to salinity by @matt001k in #350
• Fixes Bug When Default Keys Are Deleted Causing The Bridge App To Crash by @matt001k in #351
• Fix adin raw initialization by @victorsowa12 in #348
• Salinity low power entry time to 10 seconds from 60 seconds by @matt001k in #357
• Minor bug fixes to address in Salinity app by @matt001k in #360
• Update spotter log aggregate reportings for the salinity application by @matt001k in #359
• Fix stringop-truncation Compiler Error On Linux For Salinity Application by @matt001k in #362

Internal Improvements

• Add SHA Field When Building External Applications In Release by @matt001k in #339
• Add stress test functionality to bringup_mote app by @Copilot in #338
• Enable Nightly Builds by @matt001k in #341
• Add Legacy Bring Up Apps To Release by @matt001k in #356

New Contributors

• @Copilot made their first contribution in #338
• @LarkspurRaven made their first contribution in #340

Full Changelog: v0.13.4...v0.13.5

v0.13.5-rc.1

What's Changed

• Add SHA Field When Building External Applications In Release by @matt001k in #339
• ignore spurious null bytes from half-duplex transaction switching by @evanShap in #337
• Bug/rx live tags by @evanShap in #342
• missed a correct type interpolation in Rx-LIVE print by @evanShap in #344
• Add stress test functionality to bringup_mote app by @Copilot in #338
• Add Aanderaa Conductivity Sensor by @LarkspurRaven in #340
• Salinity stdev max value check by @victorsowa12 in #345
• SMEE Aanderaa 5990 Conductivity App (Mote) by @uma-kat in #333
• Enable Nightly Builds by @matt001k in #341
• Change Conductivity App Mame to Salinity by @matt001k in #347
• Feature/bridge power controller aggregations by @matt001k in #346
• Update bm_core commit hash by @matt001k in #349
• Change console print from conductivity to salinity by @matt001k in #350

New Contributors

• @Copilot made their first contribution in #338
• @LarkspurRaven made their first contribution in #340

Full Changelog: v0.13.4...v0.13.5-rc.1

v0.13.4

What's Changed

Description	Author	PR
EX03 Sensor Raw Message Decoding	@uma-kat	#327
Fix bridge LPM usart3 interrupt	@victorsowa12	#334
Turn off the boost converter when the bus is OFF	@victorsowa12	#335
Fix RTC Back In Time Events	@matt001k	#336

New Contributors

@uma-kat made their first contribution in #327 !!

Full Changelog: v0.13.3...v0.13.4

v0.13.3

What's Changed

• Mote Example App & BQ25820 Driver for UPitt by @mbella-sofar in #317
• update bm_core with max spotter tx payload len by @towynlin in #329
• Fix/hydrotwin SENS_IND column by @matt001k in #330

New Contributors

• @mbella-sofar made their first contribution in #317

Full Changelog: v0.13.2...v0.13.3

v0.13.2

What's Changed

• Fix/dropping data in adin handling by @victorsowa12 in #328

Full Changelog: v0.13.1...v0.13.2