cake-tech · tuxpizza · Jan 15, 2026 · Jan 15, 2026
diff --git a/docs/bugs-service-status/why_are_my_funds_not_appearing.md b/docs/bugs-service-status/why_are_my_funds_not_appearing.md
@@ -7,14 +7,14 @@ parent: bugs-service-status
 
 Your wallet must be fully synchronized before it displays the correct balance. You should see a `SYNCHRONIZED` label in the rounded bar at the top of your screen.
 
-[![Synchronized](/images/funds-1.jpg)](/images/funds-1.jpg)
+[![Synchronized](/images/funds-1.png)](/images/funds-1.png)
 
 If you see "XXXX blocks remaining" this means that your wallet is still synchronizing. Please wait until it is fully synchronized. If your wallet already displays `SYNCHRONIZED`, you can try [rescanning](../../features/advanced/rescan-wallet/) by opening the menu at the top-right, tapping `Rescan`, and setting a date from about a week before the wallet's first transaction.
 
 !!! warning
     [Rescanning](../../features/advanced/rescan-wallet/) will remove any saved transaction keys and destination addresses, which may be useful for proving payments.
 
-[![Syncing](/images/funds-2.jpg)](/images/funds-2.jpg)
+[![Syncing](/images/funds-2.png)](/images/funds-2.png)
 
 If the wallet says `SYNCHRONIZED` at the top and you don't see your transactions, first try force closing and re-opening your wallet, which forces a rescan.
 

diff --git a/docs/cake-pay/cake-pay/cakepay-mobile.png b/docs/cake-pay/cake-pay/cakepay-mobile.png
diff --git a/docs/cake-pay/cake-pay/cakepay-web.png b/docs/cake-pay/cake-pay/cakepay-web.png
diff --git a/docs/cryptos/bitcoin/addresstypes.png b/docs/cryptos/bitcoin/addresstypes.png
diff --git a/docs/cryptos/bitcoin/alwaysscan.png b/docs/cryptos/bitcoin/alwaysscan.png
diff --git a/docs/cryptos/bitcoin/menu.png b/docs/cryptos/bitcoin/menu.png
diff --git a/docs/cryptos/bitcoin/payjoin-1.png b/docs/cryptos/bitcoin/payjoin-1.png
diff --git a/docs/cryptos/bitcoin/payjoin-2.png b/docs/cryptos/bitcoin/payjoin-2.png
diff --git a/docs/cryptos/bitcoin/payjoin-3.png b/docs/cryptos/bitcoin/payjoin-3.png
diff --git a/docs/cryptos/bitcoin/payjoin-4.png b/docs/cryptos/bitcoin/payjoin-4.png
diff --git a/docs/cryptos/bitcoin/rbf.png b/docs/cryptos/bitcoin/rbf.png
diff --git a/docs/cryptos/bitcoin/rbf2.png b/docs/cryptos/bitcoin/rbf2.png
diff --git a/docs/cryptos/bitcoin/receive.png b/docs/cryptos/bitcoin/receive.png
diff --git a/docs/cryptos/bitcoin/silentpayments.png b/docs/cryptos/bitcoin/silentpayments.png
diff --git a/docs/cryptos/litecoin/address-switcher.png b/docs/cryptos/litecoin/address-switcher.png
diff --git a/docs/cryptos/litecoin/alwaysscan.png b/docs/cryptos/litecoin/alwaysscan.png
diff --git a/docs/cryptos/litecoin/menu.png b/docs/cryptos/litecoin/menu.png
diff --git a/docs/cryptos/litecoin/mweb-prompt.png b/docs/cryptos/litecoin/mweb-prompt.png
diff --git a/docs/cryptos/litecoin/mweb.png b/docs/cryptos/litecoin/mweb.png
diff --git a/docs/cryptos/litecoin/pegin.png b/docs/cryptos/litecoin/pegin.png
diff --git a/docs/cryptos/litecoin/receive.png b/docs/cryptos/litecoin/receive.png
diff --git a/docs/cryptos/litecoin/warning.png b/docs/cryptos/litecoin/warning.png
diff --git a/docs/cryptos/monero.md b/docs/cryptos/monero.md
@@ -39,9 +39,9 @@ A Monero subaddress is a unique, unlinkable address that can be generated on-dem
 
 If you want to manually manage your subaddresses, you can do so by going to privacy settings and disabling the "Auto generate subaddresses" feature. Then go to your receive screen. To create a new subaddress, tap on `Accounts and subaddresses`, then tap on `Addresses` and create a name for this address, then tap `Create`. Subaddresses always start with `8`. Your main address starts with `4`.
 
-![New address](/images/receive-4.jpg){:width="32%"}
-![New address name](/images/receive-5.jpg){:width="32%"}
-![Copy address](/images/receive-6.jpg){:width="32%"}
+![New address](/images/receive-4.png){:width="32%"}
+![New address name](/images/receive-5.png){:width="32%"}
+![Copy address](/images/receive-6.png){:width="32%"}
 
 ### Monero accounts
 

diff --git a/docs/faq/errors.md b/docs/faq/errors.md
@@ -9,19 +9,19 @@ parent: FAQ
 
 This error means that your Available balance is locked.  After the Monero blockchain confirmed your change, you will be able to send the rest of your XMR.  
 
-[![Not enough money](/images/error1.jpg)](/images/error1.jpg)
+[![Not enough money](/images/error1.png)](/images/error1.png)
 
 ### Error: the wallet is not synced  
 
 This error means that your wallet is synchronizing. Please leave the wallet open and wait until it has synchronized. If you are having trouble with sync speed, you may need to connect to a WiFi network, rather than using data. If the sync state is stuck on a specific amount of blocks remaining for an extended period of time, open the menu in the top-right, tap "Nodes", and select a node with a green dot to the right of it.
 
-[![Wallet not synced](/images/error2.jpg)](/images/error2.jpg)
+[![Wallet not synced](/images/error2.png)](/images/error2.png)
 
 ### New Wallet Exception: Format exception: Unexpected extension byte   
 
 You may have gotten this error while restoring a wallet. Please make sure that you input the entire seed/recovery phrase (25 for XMR, 12 for Bitcoin (Electrum)).
 
-[![Unexpected extension byte](/images/error3.jpg)](/images/error3.jpg)
+[![Unexpected extension byte](/images/error3.png)](/images/error3.png)
 
 ### Trade not created error: None of the provided exchanges can make this exchange
 

diff --git a/docs/faq/funds-not-appearing.md b/docs/faq/funds-not-appearing.md
@@ -7,14 +7,14 @@ parent: FAQ
 
 Your wallet must be fully synchronized before it displays the correct balance. You should see a `SYNCHRONIZED` label in the rounded bar at the top of your screen.
 
-[![Synchronized](/images/funds-1.jpg)](/images/funds-1.jpg)
+[![Synchronized](/images/funds-1.png)](/images/funds-1.png)
 
 If you see "XXXX blocks remaining" this means that your wallet is still synchronizing. Please wait until it is fully synchronized. If your wallet already displays `SYNCHRONIZED`, you can try [rescanning](../../features/advanced/rescan-wallet/) by opening the menu at the top-right, tapping `Rescan`, and setting a date from about a week before the wallet's first transaction.
 
 {: .warning}
 [Rescanning](../../features/advanced/rescan-wallet/) will remove any saved transaction keys and destination addresses, which may be useful for proving payments.
 
-[![Syncing](/images/funds-2.jpg)](/images/funds-2.jpg)
+[![Syncing](/images/funds-2.png)](/images/funds-2.png)
 
 If the wallet says `SYNCHRONIZED` at the top and you don't see your transactions, first try force closing and re-opening your wallet, which forces a rescan.
 

diff --git a/docs/faq/glossary/trade-id.md b/docs/faq/glossary/trade-id.md
@@ -11,6 +11,6 @@ In Cake Wallet, you can find a Trade ID on the Trade Details screen.
 
 Swipe right to left from the main balance screen to find the transaction history. Tap on an exchange and you will see the Trade Details screen. The Trade ID will be at the very top.
 
-[![Swipe right to left](/images/id-1.jpg){:width="32%"}](/images/id-1.jpg)
-[![ChangeNOW trade](/images/id-4.jpg){:width="32%"}](/images/id-4.jpg)
-[![Trade ID](/images/id-5.jpg){:width="32%"}](/images/id-5.jpg)
+[![Swipe right to left](/images/id-1.png){:width="32%"}](/images/id-1.png)
+[![ChangeNOW trade](/images/id-4.png){:width="32%"}](/images/id-4.png)
+[![Trade ID](/images/id-5.png){:width="32%"}](/images/id-5.png)
diff --git a/docs/faq/glossary/transaction-id.md b/docs/faq/glossary/transaction-id.md
@@ -11,6 +11,6 @@ In Cake Wallet, you can find a Transaction ID on the Transaction Details screen.
 
 Swipe right to left from the main balance screen to find the transaction history. Tap on a transaction and you will see the Transaction Details screen. The Transaction ID will be at the very top.  
 
-[![Swipe right to left](/images/id-1.jpg){:width="32%"}](/images/id-1.jpg)
-[![Sent transaction](/images/id-2.jpg){:width="32%"}](/images/id-2.jpg)
-[![transaction ID](/images/id-3.jpg){:width="32%"}](/images/id-3.jpg)
+[![Swipe right to left](/images/id-1.png){:width="32%"}](/images/id-1.png)
+[![Sent transaction](/images/id-2.png){:width="32%"}](/images/id-2.png)
+[![transaction ID](/images/id-3.png){:width="32%"}](/images/id-3.png)
diff --git a/docs/faq/zero-balance.md b/docs/faq/zero-balance.md
@@ -9,4 +9,4 @@ Your 'Full' and 'Available' Balances are a part of how the Monero network operat
 
 After you send an outgoing transaction, you have to wait 10 blocks before your transaction will appear in your "Available Balance". Similarly, when you initially receive an incoming XMR transaction, you'd need to wait 10 blocks before the incoming XMR transaction will be reflected in your "Available Balance". This is not something that Cake Wallet can change or update in a future version, as this is enforced by the Monero blockchain itself. 
 
-[![Balance](/images/balance1.jpg){:width="32%"}](/images/balance1.jpg)
+[![Balance](/images/balance1.png){:width="32%"}](/images/balance1.png)
diff --git a/docs/features/advanced/address-lookup-services.md b/docs/features/advanced/address-lookup-services.md
@@ -57,4 +57,4 @@ Cake Wallet allows you to type in an X username (eg: `@cake`) in the `Send` scre
 
 If (and only if) you type in an X username, then your wallet will communicate directly with the X API.
 
-[![How to send crypto with X using Cake Wallet](https://img.youtube.com/vi/dmj4HF8Q85Q/maxresdefault.jpg)](https://www.youtube.com/watch?v=dmj4HF8Q85Q)
+[![How to send crypto with X using Cake Wallet](https://img.youtube.com/vi/dmj4HF8Q85Q/maxresdefault.png)](https://www.youtube.com/watch?v=dmj4HF8Q85Q)
diff --git a/docs/features/advanced/disable-features.md b/docs/features/advanced/disable-features.md
@@ -25,10 +25,10 @@ You can alternatively select "Tor-only".
 
 ## Disabling in settings
 
-[![Privacy settings](/images/settings-privacy-1.jpg){:width="32%"}](/images/settings-privacy-1.jpg)
-[![Privacy settings](/images/settings-privacy-2.jpg){:width="32%"}](/images/settings-privacy-2.jpg)
+[![Privacy settings](/images/settings-privacy-1.png){:width="32%"}](/images/settings-privacy-1.png)
+[![Privacy settings](/images/settings-privacy-2.png){:width="32%"}](/images/settings-privacy-2.png)
 
 ## Disabling in Advanced Privacy Settings
 
-[![Advanced Privacy Settings](/images/new-wallet-4-aps-1.jpg){:width="32%"}](/images/new-wallet-4-aps-1.jpg)
-[![Advanced Privacy Settings](/images/new-wallet-4-aps-2.jpg){:width="32%"}](/images/new-wallet-4-aps-2.jpg)
+[![Advanced Privacy Settings](/images/new-wallet-4-aps-1.png){:width="32%"}](/images/new-wallet-4-aps-1.png)
+[![Advanced Privacy Settings](/images/new-wallet-4-aps-2.png){:width="32%"}](/images/new-wallet-4-aps-2.png)
diff --git a/docs/features/advanced/rescan-wallet.md b/docs/features/advanced/rescan-wallet.md
@@ -12,12 +12,12 @@ If your XMR transaction is still not appearing and the sync state of the wallet
 
 ## To rescan your wallet
 
-[![Click hamburger menu](/images/rescan-1.jpg){:width="32%"}](/images/rescan-1.jpg)
+[![Click hamburger menu](/images/rescan-1.png){:width="32%"}](/images/rescan-1.png)
 [![Click Connection and sync](/images/rescan-2.png){:width="31.1%"}](/images/rescan-2.png)
 [![Click rescan](/images/rescan-2.1.png){:width="31.1%"}](/images/rescan-2.1.png)
-[![Add restore height](/images/rescan-3.jpg){:width="32%"}](/images/rescan-3.jpg)
-[![Wait for wallet to sync](/images/rescan-4.jpg){:width="32%"}](/images/rescan-4.jpg)
-[![Wallet synchronized](/images/rescan-5.jpg){:width="32%"}](/images/rescan-5.jpg)
+[![Add restore height](/images/rescan-3.png){:width="32%"}](/images/rescan-3.png)
+[![Wait for wallet to sync](/images/rescan-4.png){:width="32%"}](/images/rescan-4.png)
+[![Wallet synchronized](/images/rescan-5.png){:width="32%"}](/images/rescan-5.png)
 
 Enter a date or a block height from about a week before you created this wallet. So, if it was created in February 2020 sometime, you could use January 31st, 2020 as the 'restore from date.' Alternatively, you can look at your wallet's very first transaction, and it will tell you the "Height" it was included in. You can enter this very same number as your "Block height" when you Rescan, and it will work perfectly.
 

diff --git a/docs/features/advanced/seed-keys.md b/docs/features/advanced/seed-keys.md
@@ -5,7 +5,7 @@ parent: Advanced Features
 
 # What are a wallet's seed/keys?  
 
-[![Wallet seed and keys](https://img.youtube.com/vi/tpXTKmpyFq0/maxresdefault.jpg)](https://www.youtube.com/watch?v=tpXTKmpyFq0)
+[![Wallet seed and keys](https://img.youtube.com/vi/tpXTKmpyFq0/maxresdefault.png)](https://www.youtube.com/watch?v=tpXTKmpyFq0)
 
 ### Wallet keys
 
@@ -24,8 +24,8 @@ Your seed is just a version of your private key written in a way that’s easier
 
 Go to the menu at the top-right, click on `Show seed/keys`. You will be prompted for your PIN, biometic authentication, or password. On the next screen, you will see your wallet's seed and keys. Cake Wallet has 1 set of these per wallet, so you must save them all individually.
 
-[![Click hamburger menu](/images/seed-1.jpg){:width="32%"}](/images/seed-1.jpg)
-[![Click "Show seed/keys"](/images/seed-2.jpg){:width="32%"}](/images/seed-2.jpg)
-[![Wallet seed/keys screen](/images/seed-3.jpg){:width="32%"}](/images/seed-3.jpg)
+[![Click hamburger menu](/images/seed-1.png){:width="32%"}](/images/seed-1.png)
+[![Click "Show seed/keys"](/images/seed-2.png){:width="32%"}](/images/seed-2.png)
+[![Wallet seed/keys screen](/images/seed-3.png){:width="32%"}](/images/seed-3.png)
 
  If you want to copy your seed/keys, just tap on each of them. **DO NOT show your seed/keys to anyone.** Your funds will likely be stolen if you give out either. Please write down your seed/keys, however, and store it in a safe place. This will allow you to restore your wallet if you lose your device, or otherwise cannot access the wallet.
diff --git a/docs/features/advanced/send-exchange-templates.md b/docs/features/advanced/send-exchange-templates.md
@@ -11,6 +11,6 @@ You can use templates for your most common transactions. To create a new templat
 
 You can create templates using a set cryptocurrency amount (eg: 1.23 XMR), or an approximate fiat amount (eg: $123.45).
 
-[![New template](/images/send-4.jpg){:width="32%"}](/images/send-4.jpg)
-[![Fill in template](/images/send-5.jpg){:width="32%"}](/images/send-5.jpg)
-[![Click template](/images/send-6.jpg){:width="32%"}](/images/send-6.jpg)
+[![New template](/images/send-4.png){:width="32%"}](/images/send-4.png)
+[![Fill in template](/images/send-5.png){:width="32%"}](/images/send-5.png)
+[![Click template](/images/send-6.png){:width="32%"}](/images/send-6.png)
diff --git a/docs/features/advanced/trocador-anonpay.md b/docs/features/advanced/trocador-anonpay.md
@@ -15,9 +15,9 @@ Easily create invoices for the exact amount you wish to be paid. You can specify
 
 Click "Receive" on the home screen, then click at the top to change "Mainnet" to "Trocador AnonPay Invoice".
 
-[![Click Receive](/images/receive-1.jpg){:width="32%"}](/images/receive-1.jpg)
-[![Click top](/images/anonpay-receive-screen.jpg){:width="32%"}](/images/anonpay-receive-screen.jpg)
-[![Change to Trocador](/images/anonpay-receive-invoice.jpg){:width="32%"}](/images/anonpay-receive-invoice.jpg)
+[![Click Receive](/images/receive-1.png){:width="32%"}](/images/receive-1.png)
+[![Click top](/images/anonpay-receive-screen.png){:width="32%"}](/images/anonpay-receive-screen.png)
+[![Change to Trocador](/images/anonpay-receive-invoice.png){:width="32%"}](/images/anonpay-receive-invoice.png)
 
 The only mandatory field is the invoice amount. It will default to the cryptocurrency wallet type that you are currently in. You can change this to another fiat currency if you like by clicking on the asset name. The minimum and maximum supported invoice amounts are shown.
 
@@ -27,26 +27,26 @@ You will be shown a screen with clearnet and onion links, and a clearnet QR code
 
 You can access the invoice status in the Transactions list, to the right of the home screen.
 
-[![Fill in forum details](/images/anonpay-invoice-forum.jpg){:width="32%"}](/images/anonpay-invoice-forum.jpg)
-[![Copy or share the invoice link](/images/anonpay-invoice-qr.jpg){:width="32%"}](/images/anonpay-invoice-qr.jpg)
-[![Check invoice status in Transactions screen](/images/anonpay-invoice-transactions.jpg){:width="32%"}](/images/anonpay-invoice-transactions.jpg)
+[![Fill in forum details](/images/anonpay-invoice-forum.png){:width="32%"}](/images/anonpay-invoice-forum.png)
+[![Copy or share the invoice link](/images/anonpay-invoice-qr.png){:width="32%"}](/images/anonpay-invoice-qr.png)
+[![Check invoice status in Transactions screen](/images/anonpay-invoice-transactions.png){:width="32%"}](/images/anonpay-invoice-transactions.png)
 
 ## Create donation links
 
 Easily create reusable donation links. A donor can donate with any supported cryptocurrency, and you will receive donations in your wallet.
 
 Click "Receive" on the home screen, then click at the top to change "Mainnet" to "Trocador AnonPay Donation Link".
 
-[![Click Receive](/images/receive-1.jpg){:width="32%"}](/images/receive-1.jpg)
-[![Click top](/images/anonpay-receive-screen.jpg){:width="32%"}](/images/anonpay-receive-screen.jpg)
-[![Change to Trocador](/images/anonpay-receive-donation.jpg){:width="32%"}](/images/anonpay-receive-donation.jpg)
+[![Click Receive](/images/receive-1.png){:width="32%"}](/images/receive-1.png)
+[![Click top](/images/anonpay-receive-screen.png){:width="32%"}](/images/anonpay-receive-screen.png)
+[![Change to Trocador](/images/anonpay-receive-donation.png){:width="32%"}](/images/anonpay-receive-donation.png)
 
 You can optionally provide a recipient name, description, and payee notification email. These are shown to the donor. We recommend that you provide an email if you want to receive a notification when people donate. **Note: your email will be shared with donors, since it appears in the donation link.** When done, click "Create donation link".
 
 You will be shown a screen with clearnet and onion links, and a clearnet QR code. Share these with the donor. The donor will be presented with a payment portal to complete their donation at the link.
 
-[![Fill in forum details](/images/anonpay-donation-forum.jpg){:width="32%"}](/images/anonpay-donation-forum.jpg)
-[![Copy or share the invoice link](/images/anonpay-donation-qr.jpg){:width="32%"}](/images/anonpay-donation-qr.jpg)
+[![Fill in forum details](/images/anonpay-donation-forum.png){:width="32%"}](/images/anonpay-donation-forum.png)
+[![Copy or share the invoice link](/images/anonpay-donation-qr.png){:width="32%"}](/images/anonpay-donation-qr.png)
 
 ### Reusing and editing the donation link
 

diff --git a/docs/features/basic/receive-funds.md b/docs/features/basic/receive-funds.md
@@ -11,17 +11,17 @@ parent: Basic Features
 
 To receive funds in Cake Wallet, you will need to provide your wallet's address or QR code to the sender. Your wallet's address can be found by clicking `Receive` on the home screen. Here, you can copy the address by tapping the copy icon, or you can click to expand the QR code to receive funds.
 
-[![Swipe left to right](/images/receive-1.jpg){:width="32%"}](/images/receive-1.jpg)
-[![Copy address](/images/receive-2.jpg){:width="32%"}](/images/receive-2.jpg)
-[![Accounts and subaddresses](/images/receive-3.jpg){:width="32%"}](/images/receive-3.jpg) 
+[![Swipe left to right](/images/receive-1.png){:width="32%"}](/images/receive-1.png)
+[![Copy address](/images/receive-2.png){:width="32%"}](/images/receive-2.png)
+[![Accounts and subaddresses](/images/receive-3.png){:width="32%"}](/images/receive-3.png) 
 
 ### Video tutorial
 
-[![How to send and receive Monero](https://img.youtube.com/vi/ndHgZbbpCJc/maxresdefault.jpg)](https://www.youtube.com/watch?v=ndHgZbbpCJc)
+[![How to send and receive Monero](https://img.youtube.com/vi/ndHgZbbpCJc/maxresdefault.png)](https://www.youtube.com/watch?v=ndHgZbbpCJc)
 
 ## Receiving Bitcoin or Litecoin
 
 To receive BTC to your Bitcoin wallet within the Cake Wallet app, you will need to provide your wallet's address or QR code to the sender. A wallet's address can be found by clicking `Receive` on the home screen. Here, you can copy the address by tapping the copy icon, or you can click to expand the QR code to receive funds. We automatically generate new Bitcoin addresses for better privacy after they are used. We encourage you to use a new Bitcoin address each time, but previous addresses continue to work.
 
-[![Bitcoin receive screen](/images/receive-7.jpg){:width="32%"}](/images/receive-7.jpg)
+[![Bitcoin receive screen](/images/receive-7.png){:width="32%"}](/images/receive-7.png)
 
diff --git a/docs/features/basic/send-funds.md b/docs/features/basic/send-funds.md
@@ -13,10 +13,10 @@ To get to the send screen, tap `Send` on the balance screen. Then, you should pa
 
 Note that the network fee is added to the transaction separately. So if your balance is 1 XMR, you are sending 0.5 XMR to someone, and the network fee is 0.01 XMR, then you will spend a total of 0.51 XMR for the transaction. If you send your entire balance by clicking the `ALL` button in the upper right, then the network fee will be deducted from the full balance. In the "Confirm sending" window, the total amount deducted from the wallet balance is the sum of the "Amount" and the "Fee" values.
 
-[![Click send on home screen](/images/send-1.jpg){:width="32%"}](/images/send-1.jpg)
-[![Fill in address and amount](/images/send-2.jpg){:width="32%"}](/images/send-2.jpg)
-[![Confirm sending](/images/send-3.jpg){:width="32%"}](/images/send-3.jpg)
+[![Click send on home screen](/images/send-1.png){:width="32%"}](/images/send-1.png)
+[![Fill in address and amount](/images/send-2.png){:width="32%"}](/images/send-2.png)
+[![Confirm sending](/images/send-3.png){:width="32%"}](/images/send-3.png)
 
 ## How to send and receive Monero 
 
-[![How to send and receive Monero](https://img.youtube.com/vi/ndHgZbbpCJc/maxresdefault.jpg)](https://www.youtube.com/watch?v=ndHgZbbpCJc)
+[![How to send and receive Monero](https://img.youtube.com/vi/ndHgZbbpCJc/maxresdefault.png)](https://www.youtube.com/watch?v=ndHgZbbpCJc)
diff --git a/docs/features/basic/swap.md b/docs/features/basic/swap.md
@@ -35,9 +35,9 @@ Cake will compose the transaction, show final screen with all details right befo
 
 ## You can watch our YouTube tutorials here:
 
-[![How to exchange BTC and XMR video](https://img.youtube.com/vi/u16CwdtRQ4g/maxresdefault.jpg)](https://www.youtube.com/watch?v=6juLQPvOQnQ&t=1s)
-[![How to exchange BTC and XMR video](https://img.youtube.com/vi/u16CwdtRQ4g/maxresdefault.jpg)](https://www.youtube.com/watch?v=u16CwdtRQ4g)
-[![How to exchange BTC and XMR video](https://img.youtube.com/vi/pbQD7McNTxc/maxresdefault.jpg)](https://www.youtube.com/watch?v=pbQD7McNTxc)
+[![How to exchange BTC and XMR video](https://img.youtube.com/vi/u16CwdtRQ4g/maxresdefault.png)](https://www.youtube.com/watch?v=6juLQPvOQnQ&t=1s)
+[![How to exchange BTC and XMR video](https://img.youtube.com/vi/u16CwdtRQ4g/maxresdefault.png)](https://www.youtube.com/watch?v=u16CwdtRQ4g)
+[![How to exchange BTC and XMR video](https://img.youtube.com/vi/pbQD7McNTxc/maxresdefault.png)](https://www.youtube.com/watch?v=pbQD7McNTxc)
 
 ## Supported swap assets
 

diff --git a/docs/get-started/android/obtainium/obtainium-1.png b/docs/get-started/android/obtainium/obtainium-1.png
diff --git a/docs/get-started/android/obtainium/obtainium-2.png b/docs/get-started/android/obtainium/obtainium-2.png
diff --git a/docs/get-started/android/obtainium/obtainium-3.png b/docs/get-started/android/obtainium/obtainium-3.png
diff --git a/docs/get-started/android/obtainium/obtainium-4.png b/docs/get-started/android/obtainium/obtainium-4.png
diff --git a/docs/get-started/android/obtainium/obtainium-5.png b/docs/get-started/android/obtainium/obtainium-5.png
diff --git a/docs/get-started/android/obtainium/obtainium-6.png b/docs/get-started/android/obtainium/obtainium-6.png
diff --git a/docs/get-started/android/obtainium/obtainium-7.png b/docs/get-started/android/obtainium/obtainium-7.png
diff --git a/docs/get-started/linux/tails/image.png b/docs/get-started/linux/tails/image.png
diff --git a/docs/get-started/linux/tails/image0.png b/docs/get-started/linux/tails/image0.png
diff --git a/docs/get-started/linux/tails/image1.png b/docs/get-started/linux/tails/image1.png
diff --git a/docs/get-started/linux/tails/image2.png b/docs/get-started/linux/tails/image2.png
diff --git a/docs/get-started/linux/tails/image3.png b/docs/get-started/linux/tails/image3.png
Original file line number	Diff line number	Diff line change
Expand Up		@@ -9,4 +9,4 @@ Your 'Full' and 'Available' Balances are a part of how the Monero network operat

		After you send an outgoing transaction, you have to wait 10 blocks before your transaction will appear in your "Available Balance". Similarly, when you initially receive an incoming XMR transaction, you'd need to wait 10 blocks before the incoming XMR transaction will be reflected in your "Available Balance". This is not something that Cake Wallet can change or update in a future version, as this is enforced by the Monero blockchain itself.

		[![Balance](/images/balance1.jpg){:width="32%"}](/images/balance1.jpg)
		[![Balance](/images/balance1.png){:width="32%"}](/images/balance1.png)
Original file line number	Diff line number	Diff line change
Expand Up		@@ -57,4 +57,4 @@ Cake Wallet allows you to type in an X username (eg: `@cake`) in the `Send` scre

		If (and only if) you type in an X username, then your wallet will communicate directly with the X API.

		[![How to send crypto with X using Cake Wallet](https://img.youtube.com/vi/dmj4HF8Q85Q/maxresdefault.jpg)](https://www.youtube.com/watch?v=dmj4HF8Q85Q)
		[![How to send crypto with X using Cake Wallet](https://img.youtube.com/vi/dmj4HF8Q85Q/maxresdefault.png)](https://www.youtube.com/watch?v=dmj4HF8Q85Q)