This project lets you control a Sommer Pro+ garage door using a printed circuit board that's easy to solder thanks to only through-hole components and a plug and play design. The board simply clips into your wall control.
Features :
- Control opening and closing
- Retrieve door open or closed status
- Retrieve the status of the carriage lamp
- Forward original Keypad and Light connector
Compatible doors : S 9050 pro / S 9050 pro+ / S 9060 pro / S 9060 pro+ / S 9080 pro / S 9080 pro+ / S 9110 pro / S 9110 pro+
**Compatible boards: ** D1 mini (ESP8266), D1 mini Lite (ESP-8285), S2 mini (ESP32-S2FN4R2), C3 mini (ESP32-C3FH4), S3 mini (ESP32-S3FH4R2)
Tip
If you are looking for a Zigbee or Thread version, you can easily use a ProtoBoard to adapt the D1 pins with another smaller ESP32-C6 or ESP32-H2 board.
 |
 |
|---|
🏄♂️ The PCB :
View on : https://oshwlab.com/camillebaronnet/sommer-pro-esp32
🛒 The shopping list :
Components :
| Location | Type | Helpful information |
|---|---|---|
| R1 | 10k | |
| C1 | 100uF | |
| C2, C3, C4, C5 | 220uF | The sum of all the capacitors C2 to C6 should be around 1000uF. You can put only 2x470uF or one 1000uF capacitor directly. |
| L1 | 100uH | Package D4xL10.5mm |
| D1 | Schottky Barrier | |
| Q1, Q2 | MOSFET CANAL-N | Exemple 2N7000 |
| U2 | LM2576T-5.0 |
Connectors :
| Location | Type | Helpful information |
|---|---|---|
| LIGHT | PH2.0 Female | |
| LIGHT (L R) | PH2.0 Male 100mm Wire | Cable 10mm |
| KEYPAD | Dupont 2.54mm Male 3 pins | |
| H1 | Dupont 2.54mm Female 4 pins | |
| H2 | Dupont 2.54mm Female 3 pins |
Append this part to your existing ESPHome configuration :
binary_sensor:
- platform: gpio
pin: GPIO16
name: "Door"
id: door_status
device_class: "door"
- platform: gpio
pin: GPIO14
name: "Light"
device_class: "light"
switch:
- platform: gpio
pin: GPIO2
id: open_door
name: "Open"
icon: "mdi:gate"
on_turn_on:
- delay: 1000ms
- switch.turn_off: open_door
internal: true
- platform: gpio
pin: GPIO0
id: close_door
name: "Close"
icon: "mdi:gate"
on_turn_on:
- delay: 1000ms
- switch.turn_off: close_door
internal: true
cover:
- platform: template
device_class: garage
name: "Control"
open_action:
- switch.turn_on: open_door
close_action:
- switch.turn_on: close_door
stop_action:
- switch.turn_off: close_door
- switch.turn_off: open_door
lambda: |-
if (id(door_status).state) {
return COVER_OPEN;
} else {
return COVER_CLOSED;
}