Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...

Author: torvalds

.mailmap

@@ -71,6 +71,7 @@ Boris Brezillon <[email protected]> <[email protected]>
 Brian Avery <[email protected]>
 Brian King <[email protected]>
 Brian Silverman <[email protected]> <[email protected]>
+Cai Huoqing <[email protected]> <[email protected]>
 Changbin Du <[email protected]> <[email protected]>
 Changbin Du <[email protected]> <[email protected]>
 Chao Yu <[email protected]> <[email protected]>

Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

@@ -113,3 +113,144 @@ Description:
 		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <[email protected]>
+Description:
+		This sysfs interface allows user to configure features at
+		runtime. The user can enable or disable features running at
+		firmware as well as the user can configure the parameters of
+		the features at runtime. The supported features are over
+		temperature and external watchdog. Here, the external watchdog
+		is completely different than the /dev/watchdog as the external
+		watchdog is running on the firmware and it is used to monitor
+		the health of firmware not APU(Linux). Also, the external
+		watchdog is interfaced outside of the zynqmp soc.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Select over temperature config ID to enable/disable feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 1.
+
+		Select over temperature config ID to configure OT limit
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 2.
+
+		Select external watchdog config ID to enable/disable feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 3.
+
+		Select external watchdog config ID to configure time interval
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 4.
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <[email protected]>
+Description:
+		This sysfs interface allows to configure features at runtime.
+		The user can enable or disable features running at firmware.
+		Also, the user can configure the parameters of the features
+		at runtime. The supported features are over temperature and
+		external watchdog. Here, the external watchdog is completely
+		different than the /dev/watchdog as the external watchdog is
+		running on the firmware and it is used to monitor the health
+		of firmware not APU(Linux). Also, the external watchdog is
+		interfaced outside of the zynqmp soc.
+
+		By default the features are disabled in the firmware. The user
+		can enable features by querying appropriate config id of the
+		features.
+
+		The default limit for the over temperature is 90 Degree Celsius.
+		The default timer interval for the external watchdog is 570ms.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Enable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure over temperature limit to 50 Degree Celsius
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature limit is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 50.
+
+		Enable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure external watchdog timer interval to 500ms
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog timer interval is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 500.
+
+Users:		Xilinx

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -12,24 +12,7 @@ What:           /sys/kernel/debug/habanalabs/hl<n>/clk_gate
 Date:           May 2020
 KernelVersion:  5.8
 Contact:        [email protected]
-Description:    Allow the root user to disable/enable in runtime the clock
-                gating mechanism in Gaudi. Due to how Gaudi is built, the
-                clock gating needs to be disabled in order to access the
-                registers of the TPC and MME engines. This is sometimes needed
-                during debug by the user and hence the user needs this option.
-                The user can supply a bitmask value, each bit represents
-                a different engine to disable/enable its clock gating feature.
-                The bitmask is composed of 20 bits:
-
-                =======   ============
-                0  -  7   DMA channels
-                8  - 11   MME engines
-                12 - 19   TPC engines
-                =======   ============
-
-                The bit's location of a specific engine can be determined
-                using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
-                are defined in uapi habanalabs.h file in enum gaudi_engine_id
+Description:    This setting is now deprecated as clock gating is handled solely by the f/w
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
 Date:           Jan 2019
@@ -239,6 +222,7 @@ KernelVersion:  5.6
 Contact:        [email protected]
 Description:    Sets the stop-on_error option for the device engines. Value of
                 "0" is for disable, otherwise enable.
+                Relevant only for GOYA and GAUDI.
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
 Date:           Sep 2021

Documentation/ABI/testing/sysfs-bus-iio

@@ -476,6 +476,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -1213,6 +1214,32 @@ Description:
 		number or direction is not specified, applies to all channels of
 		this type.
 
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Similar to in_accel_mag[_y][_rising|_falling]_en, but the event
+		value is relative to a reference magnitude. The reference magnitude
+		includes the graviational acceleration.
+
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_value
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		The value to which the reference magnitude of the channel is
+		compared. If the axis is not specified, it applies to all channels
+		of this type.
+
 What:		/sys/.../events/in_steps_change_en
 KernelVersion:	4.0
 Contact:	[email protected]
@@ -1252,6 +1279,10 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
+		Note that it might be impossible to configure other attributes,
+		(e.g.: events, scale, sampling rate) if they impact the currently
+		active buffer capture session.
+
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY
 KernelVersion:	5.11
 Contact:	[email protected]

Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a

@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_en
+KernelVersion:	5.14
+Contact:	[email protected]
+Description:
+		Used to enable an output for balancing cells for time
+		controlled via in_voltage_Y-voltageZ_balance_switch_timer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_timer
+KernelVersion:	5.14
+Contact:	[email protected]
+Description:
+		Time in seconds for which balance switch will be turned on.
+		Multiple of 71.5 seconds.

Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688

@@ -0,0 +1,86 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
+		for changing the dither parameters. They way it should be done is:
+
+		- disable dither operation;
+		- change dither parameters (eg: frequency, phase...);
+		- enabled dither operation
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		This raw, unscaled value refers to the dither signal amplitude.
+		The same scale as in out_voltageY_raw applies. However, the
+		offset might be different as it's always 0 for this attribute.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Available range for dither raw amplitude values.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Offset applied to out_voltageY_dither_raw. Read only attribute
+		always set to 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Sets the dither signal frequency. Units are in Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Returns the available values for the dither frequency.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Sets the dither signal phase. Units are in Radians.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Returns the available values for the dither phase.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
+		useful when one wants to change the DAC output codes. The way it should
+		be done is:
+
+		- disable toggle operation;
+		- change out_voltageY_raw0 and out_voltageY_raw1;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		It has the same meaning as out_voltageY_raw. This attribute is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
+		as in out_voltageY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion:	5.18
+Contact:	[email protected]
+Description:
+		Performs a SW toggle. This attribute is specific to toggle
+		enabled channels and allows to toggle between out_voltageY_raw0
+		and out_voltageY_raw1 through software. Writing 0 will select
+		out_voltageY_raw0 while 1 selects out_voltageY_raw1.

Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014

@@ -0,0 +1,23 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_coarse
+KernelVersion: 5.18
+Contact:	[email protected]
+Description:
+		Read/write value for the digital attenuator gain (IF_I) with coarse steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_coarse
+KernelVersion: 5.18
+Contact:	[email protected]
+Description:
+		Read/write value for the digital attenuator gain (IF_Q) with coarse steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_fine
+KernelVersion: 5.18
+Contact:	[email protected]
+Description:
+		Read/write value for the digital attenuator gain (IF_I) with fine steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_fine
+KernelVersion: 5.18
+Contact:	[email protected]
+Description:
+		Read/write value for the digital attenuator gain (IF_Q) with fine steps.

Documentation/ABI/testing/sysfs-bus-iio-sx9324

@@ -0,0 +1,28 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup
+Date:		November 2021
+KernelVersion:	5.17
+Contact:	Gwendal Grignou <[email protected]>
+Description:
+		SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout
+		defines if the input is
+		+ not connected (HZ),
+		+ grounded (GD),
+		+ connected to an antenna where it can act as a base
+		  (DS - data shield), or measured input (MI).
+
+		The sensor rotates measurement across 4 phases
+		(PH0, PH1, PH2, PH3), where the inputs are configured
+		and then measured.
+
+		By default,  during the first phase, [PH0], CS0 is measured,
+		while CS1 and CS2 are used as shields.
+		`cat in_proximity0_setup` returns "MI,DS,DS".
+		[PH1], CS1 is measured, CS0 and CS2 are shield:
+		`cat in_proximity1_setup` returns "DS,MI,DS".
+		[PH2], CS2 is measured, CS0 and CS1 are shield:
+		`cat in_proximity1_setup` returns "DS,DS,MI".
+		[PH3], CS1 and CS2 are measured (combo mode):
+		`cat in_proximity1_setup` returns "DS,MI,MI".
+
+		Note, these are the chip default. Hardware layout will most
+		likely dictate different output. The entry is read-only.