Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "There are three independent sets of changes:

   - Sai Prakash Ranjan adds tracing support to the asm-generic version
     of the MMIO accessors, which is intended to help understand
     problems with device drivers and has been part of Qualcomm's vendor
     kernels for many years

   - A patch from Sebastian Siewior to rework the handling of IRQ stacks
     in softirqs across architectures, which is needed for enabling
     PREEMPT_RT

   - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
     the code behind that, after the last users of this old interface
     made it in through the netdev, scsi, media and staging trees"

* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: asm-generic: fcntl: Fix typo 'the the' in comment
  arch/*/: remove CONFIG_VIRT_TO_BUS
  soc: qcom: geni: Disable MMIO tracing for GENI SE
  serial: qcom_geni_serial: Disable MMIO tracing for geni serial
  asm-generic/io: Add logging support for MMIO accessors
  KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
  lib: Add register read/write tracing support
  drm/meson: Fix overflow implicit truncation warnings
  irqchip/tegra: Fix overflow implicit truncation warnings
  coresight: etm4x: Use asm-generic IO memory barriers
  arm64: io: Use asm-generic high level MMIO accessors
  arch/*: Disable softirq stacks on PREEMPT_RT.

Author: torvalds

Documentation/core-api/bus-virt-phys-mapping.rst

@@ -707,20 +707,6 @@ to use the dma_sync_*() interfaces::
 		}
 	}
 
-Drivers converted fully to this interface should not use virt_to_bus() any
-longer, nor should they use bus_to_virt(). Some drivers have to be changed a
-little bit, because there is no longer an equivalent to bus_to_virt() in the
-dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the dma_alloc_coherent(), dma_pool_alloc(), and dma_map_single()
-calls (dma_map_sg() stores them in the scatterlist itself if the platform
-supports dynamic DMA mapping in hardware) in your driver structures and/or
-in the card registers.
-
-All drivers should be using these interfaces with no exceptions.  It
-is planned to completely remove virt_to_bus() and bus_to_virt() as
-they are entirely deprecated.  Some ports already do not provide these
-as it is impossible to correctly support them.
-
 Handling Errors
 ===============
 

Documentation/core-api/dma-api-howto.rst

@@ -41,7 +41,6 @@ Library functionality that is used throughout the kernel.
    rbtree
    generic-radix-tree
    packing
-   bus-virt-phys-mapping
    this_cpu_ops
    timekeeping
    errseq

Documentation/core-api/index.rst

@@ -53,7 +53,6 @@ Todolist:
    circular-buffers
    generic-radix-tree
    packing
-   bus-virt-phys-mapping
    this_cpu_ops
    timekeeping
    errseq

Documentation/translations/zh_CN/core-api/index.rst

@@ -1406,6 +1406,9 @@ config ARCH_HAS_ELFCORE_COMPAT
 config ARCH_HAS_PARANOID_L1D_FLUSH
 	bool
 
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+	bool
+
 config DYNAMIC_SIGFRAME
 	bool
 

arch/Kconfig

@@ -17,7 +17,6 @@ config ALPHA
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
-	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP

arch/alpha/Kconfig

@@ -20,7 +20,7 @@
 #define fd_free_dma()           free_dma(FLOPPY_DMA)
 #define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
 #define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr))
 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
 #define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)

arch/alpha/include/asm/floppy.h

@@ -106,15 +106,15 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(volatile void *address)
+static inline unsigned long __deprecated isa_virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
 	return phys <= __direct_map_size ? bus : 0;
 }
-#define isa_virt_to_bus virt_to_bus
+#define isa_virt_to_bus isa_virt_to_bus
 
-static inline void * __deprecated bus_to_virt(unsigned long address)
+static inline void * __deprecated isa_bus_to_virt(unsigned long address)
 {
 	void *virt;
 
@@ -125,7 +125,7 @@ static inline void * __deprecated bus_to_virt(unsigned long address)
 	virt = phys_to_virt(address);
 	return (long)address <= 0 ? NULL : virt;
 }
-#define isa_bus_to_virt bus_to_virt
+#define isa_bus_to_virt isa_bus_to_virt
 
 /*
  * There are different chipsets to interface the Alpha CPUs to the world.

arch/alpha/include/asm/io.h

@@ -70,6 +70,7 @@ static void __init init_irq_stacks(void)
 	}
 }
 
+#ifndef CONFIG_PREEMPT_RT
 static void ____do_softirq(void *arg)
 {
 	__do_softirq();
@@ -80,7 +81,7 @@ void do_softirq_own_stack(void)
 	call_with_stack(____do_softirq, NULL,
 			__this_cpu_read(irq_stack_ptr));
 }
-
+#endif
 #endif
 
 int arch_show_interrupts(struct seq_file *p, int prec)

arch/arm/kernel/irq.c

@@ -49,6 +49,7 @@ config ARM64
 	select ARCH_HAS_ZONE_DMA_SET if EXPERT
 	select ARCH_HAVE_ELF_PROT
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_HAVE_TRACE_MMIO_ACCESS
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
 	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
 	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION