[MT] Static routes - BGP

src/content/docs/magic-transit/cloudflare-ips.mdx

@@ -13,7 +13,7 @@ In addition to using Magic Transit with your own IP address, you can use Magic T
 To protect your network using a Cloudflare IP address, contact your account manager. After receiving your IP address, you will need to:
 
 - [Create a tunnel](/magic-transit/how-to/configure-tunnels/).
-- [Set up static routes](/magic-transit/how-to/configure-static-routes).
+- [Set up static routes](/magic-transit/how-to/configure-static-routes) or [BGP peering](/magic-transit/how-to/bgp-peering/).
 - [Configure health checks](/magic-transit/how-to/run-endpoint-health-checks).
 - Confirm [tunnel](/magic-transit/how-to/tunnel-health-checks/) and endpoint health checks were properly configured.
 - Update your infrastructure at your own pace to use the allocated Cloudflare IPs.

src/content/docs/magic-transit/get-started.mdx

@@ -92,13 +92,13 @@ Refer to [Maximum transmission unit and maximum segment size](/magic-transit/ref
 
 [Configure the tunnels](/magic-transit/how-to/configure-tunnels/) on both the Cloudflare side and your router side to connect to your origin infrastructure.
 
-## 4. Configure static routes
+## 4. Configure static routes or BGP peering
 
-Configure [static routes](/magic-transit/how-to/configure-static-routes/) to route traffic from Cloudflare's global network to your locations.
+Configure [static routes](/magic-transit/how-to/configure-static-routes/) or [BGP peering](/magic-transit/how-to/bgp-peering/) to route traffic from Cloudflare's global network to your locations.
 
 ## 5. Run pre-flight checks
 
-After setting up your tunnels and static routes, Cloudflare validates tunnel connectivity, tunnel and endpoint [health checks](/magic-transit/reference/tunnel-health-checks/#tunnel-health-checks), <GlossaryTooltip term="letter of agency">Letter of Agency (LOA)</GlossaryTooltip>, Internet Routing Registry (IRR), and <GlossaryTooltip term="maximum segment size (MSS)">maximum segment size (MSS) configurations</GlossaryTooltip>. Configurations for Cloudflare global network are applied and take around one day to rollout.
+After setting up your tunnels and routes, Cloudflare validates tunnel connectivity, tunnel and endpoint [health checks](/magic-transit/reference/tunnel-health-checks/#tunnel-health-checks), <GlossaryTooltip term="letter of agency">Letter of Agency (LOA)</GlossaryTooltip>, Internet Routing Registry (IRR), and <GlossaryTooltip term="maximum segment size (MSS)">maximum segment size (MSS) configurations</GlossaryTooltip>. Configurations for Cloudflare global network are applied and take around one day to rollout.
 
 ## 6. Advertise prefixes
 

src/content/docs/magic-transit/how-to/advertise-prefixes.mdx

@@ -96,7 +96,7 @@ If you use Direct CNI as a way to on-ramp your network traffic to Magic Transit,
 
 ### Regional settings
 
-Magic Transit requires static routing to steer traffic from Cloudflare's network over one of your configured tunnel off-ramps (GRE, IPsec or CNI). Currently, advertisement of routes for traffic engineering purposes is not supported. As a best practice to reduce last-hop latency, you should consider scoping your routes regionally. The default setting for static route regions is **All Regions**. Refer to [Configure static routes](/magic-transit/how-to/configure-static-routes/) for more information.
+Magic Transit requires static routing to steer traffic from Cloudflare's network over one of your configured tunnel off-ramps (for GRE and IPsec tunnels). For CNI, both static routing and [BGP](/magic-transit/how-to/bgp-peering/) options are available. Currently, advertisement of routes for traffic engineering purposes is not supported. As a best practice to reduce last-hop latency, you should consider scoping your routes regionally. The default setting for static route regions is **All Regions**. Refer to [Configure static routes](/magic-transit/how-to/configure-static-routes/) for more information.
 
 ## Example router configurations