[MWAN Connector] Unify partials

src/content/docs/magic-wan/configuration/connector/configure-hardware-connector/index.mdx

@@ -6,162 +6,16 @@ sidebar:
   label: Configure hardware Connector
 ---
 
-import { GlossaryTooltip, Render, Card } from "~/components";
-
-## Prerequisites
-
-You need to purchase [Magic WAN](https://www.cloudflare.com/magic-wan/) before you can purchase and use the Magic WAN Connector. The Magic WAN Connector can function as your primary edge device for your network, or be deployed in-line with existing network gear.
-
-You also need to purchase a Magic WAN Connector before you can start configuring your settings in the Cloudflare dashboard. After buying a Magic WAN Connector, the device will be registered with your Cloudflare account and show up in your Cloudflare dashboard.
-
-Contact your account representative to learn more about purchasing options for the Magic WAN Connector device.
-
----
-
-## Before you begin
-
-<Render file="connector/before-you-begin" />
-
----
-
-## DHCP vs static IP connections
-
-Magic WAN Connector uses a DHCP connection at first boot to download your settings and go through the activation process. However, if you need to use a static IP in your Connector, and this is a fresh install:
-1. Connect Magic WAN Connector to a DHCP port with access to the Internet.
-2. Go through the [setup flow](#set-up-cloudflare-dashboard) below and activate your Connector.
-3. Refer to [WAN with a static IP address](#wan-with-a-static-ip-address).
-
----
-
-## Port speeds
-
-The hardware version of the Magic WAN connector includes two [SFP+ ports](https://en.wikipedia.org/wiki/Small_Form-factor_Pluggable) that support 10G throughput, as well as six RJ45 ports that support 1G throughput.
-
-Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for details on this topic.
-
----
-
-## Set up Cloudflare dashboard
-
-<Render
-	file="connector/connector-onramps"
-	params={{
-		wan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your WAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose the number corresponding to the port that you are using in Connector. <br> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
-		lan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your LAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose a number corresponding to the port that you are using in Connector. <br> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
-		noConnectorShows:
-			"You need to have bought a Connector already for it to show up here. Refer to [Prerequisites](#prerequisites) if no Connector shows up in this list.",
-	}}
-/>
-
-## Set up your Magic WAN Connector
-
-### Device installation
-
-There are several deployment options for Magic WAN Connector. Connector can act like a DHCP server for your local network, or integrate with your local setup and have static IP addresses assigned to it.
-
-When Connector acts like the WAN router for your site, deployment will be something like this:
-
-```mermaid
-flowchart LR
-accTitle: Magic WAN Connector set up as a DHCP server, and connecting to the Internet.
-    a(Magic WAN Connector)--> b(Internet) --> c(Cloudflare)
-
-    subgraph Customer site
-    d[LAN 1] --> a
-    e[LAN 2] --> a
-    end
-
-    classDef orange fill:#f48120,color: black
-    class a,c orange
-```
-
-<br />
-
-In the example below, the Connector sits behind the WAN router in your site, and on-ramps only some of the existing LANs to Cloudflare.
-
-<br />
-
-```mermaid
-flowchart LR
-accTitle: Magic WAN Connector connects to the router in the site, and only some of the LANs connect to Connector.
-    a(Magic WAN Connector)--> b((Site's router)) --> c(Internet) --> i(Cloudflare)
-
-    subgraph Customer site
-    d[LAN 1] --> a
-    e[LAN 2] --> a
-    g(LAN 3) --> b
-    h(LAN 4) --> b
-    end
-
-    classDef orange fill:#f48120,color: black
-    class a,i orange
-```
-
-Refer to [Magic WAN Connector deployment options](/reference-architecture/diagrams/sase/magic-wan-connector-deployment/) for a high-level explanation of the deployment options that make sense to most environments, as well as a few advanced use cases.
-
-#### Firewall settings required
-
-If there is a firewall deployed upstream of the Magic WAN Connector, configure the firewall to allow the following traffic:
-
-{/* prettier-ignore */}
-| Protocol/port | Destination IP/URL | Purpose |
-| --- | --- |--- |
-| `UDP/53` | DNS destination IP `1.1.1.1` | Needed to allow DNS traffic to Cloudflare DNS servers. Cloudflare uses this port for DNS lookups of control plane API |
-| `TCP/443` | - | The Connector will open outbound HTTPS connections over this port for control plane operations. |
-| `UDP/4500` | Destination IP `162.159.64.1` | Needed for Connector's initialization and discovery traffic through outbound connections. |
-| `UDP/4500` | Destination IP - Cloudflare anycast IPs | Needed for the Cloudflare <GlossaryTooltip term="anycast" link="/magic-wan/configuration/manually/how-to/configure-tunnels/">anycast IPs</GlossaryTooltip> assigned to your account for tunnel outbound connections. This traffic is tunnel traffic. |
-| `TCP/7844`, `UDP/7844` | Outbound connections | This is for debugging facilities in the Connector. |
-| `UDP/123` | `http://time.cloudflare.com/` | Needed for Magic WAN Connector to periodically contact Cloudflare's Time Services. |
-
-## Activate Connector
-
-<Render
-	file="connector/activate-connector"
-	params={{
-		shippedLanguage: "The Magic WAN Connector is shipped to you deactivated",
-	}}
-/>
-
----
-
-## WAN with a static IP address
-
-After activating your Connector, you can use it in a network configuration with the WAN interface set to a static IP address — that is, an Internet configuration that is not automatically set by DHCP. To use your Connector on a network configuration with a static IP, follow the steps below.
-
-:::caution
-Make sure you complete the setup workflow and activate your Magic WAN Connector before changing the WAN settings to a static IP.
-:::
-
-1. Connect Magic WAN Connector to a DHCP port with access to the Internet.
-2. [Add a Connector on-ramp](#1-add-a-connector-on-ramp) in the Cloudflare dashboard.
-3. Create a [DHCP WAN](#2-create-a-wan).
-4. [Activate](#activate-connector) and power on your Connector.
-5. Wait 60 seconds.
-6. Make changes to the [WAN settings](#2-create-a-wan) in the Cloudflare dashboard to a static IP set up.
-7. Wait 60 seconds again.
-8. Magic WAN Connector will go offline. This is normal and expected behavior.
-9. Adjust your physical connections as required to match the static configuration.
-10. Magic WAN Connector comes back online.
-
----
-
-<Render
-	file="connector/ha-configs"
-	params={{
-		hardSoftConn: "You need to deploy two Connectors in your premises before you can set up a site in high availability.",
-		finalInstructions:
-			"Follow the instructions in [Set up your Magic WAN Connector](#set-up-your-magic-wan-connector) and [Activate connector](#activate-connector) to finish setting up your Connectors.",
-	}}
-/>
-
----
-
-## IP sec tunnels and static routes
-
-<Render file="connector/ipsec-static-tunnels" />
-
----
-
-## Next steps
-
-<Render file="connector/next-steps" />
+import { Render } from "~/components";
+
+<Render file="connector/configure-connectors" params={{
+	magicWord: "hardware",
+	productName: "Magic WAN Connector",
+	productNameType: "Magic WAN Connector",
+	wan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your WAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose the number corresponding to the port that you are using in Connector. <br> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
+	lan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your LAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose a number corresponding to the port that you are using in Connector. <br> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
+	noConnectorShows: "You need to have bought a Connector already for it to show up here. Refer to [Prerequisites](#prerequisites) if no Connector shows up in this list.",
+	shippedLanguage: "The Magic WAN Connector is shipped to you deactivated",
+	hardSoftConn: "You need to deploy two Connectors in your premises before you can set up a site in high availability.",
+	finalInstructions: "Follow the instructions in [Set up your Magic WAN Connector](#set-up-your-magic-wan-connector) and [Activate connector](#activate-connector) to finish setting up your Connectors."
+	}} />